ITO 박막이 증착된 편광판을 기판으로 하는 액정 셀의 제작
Fabrication of a Liquid Crystal Cell Using ITO-deposited Polarizers as Substrates
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 논문에서는 액정 디스플레이의 구현에 있어서 필수적인 필름인 편광판에 ITO를 증착하여 기존 액정 디스플레이에서 두께의 대부분을 차지하는 유리기판을 제거함으로써 경략 박형 액정 셀을 구현하였다. 저온(40℃)에서 편광판에 sputtering으로 buffer layer와 ITO를 증착하여 높은 투과율과 낮은 비저항 및 편평도를 확보하였다. 최종적으로 저온공정이 가능한 ion-beam 배향법을 이용하여 액정을 배향하고 액정 셀을 제작하고 전기광학특성을 확인하였다.
Abstract
We propose a super-thin and light-weight liquid crystal cell, in which glass substrates are eliminated and polarizers are used as substrates. We fabricate a polarizer substrate by depositing a-SiOX as a buffer layer, indium-tin-oxide as a transparent conducting layer, and a-SiOX as an alignment layer on a polarizer sequentially at a low temperature. We use the ion-beam method to align liquid crystals on polarizer substrates.
참고문헌 (24)
- K. Tsuda, "Japan Patent 2004069835", ~ (2004)
- K.-H. Kim, "Optical configurations for nematic liquid crystal device switchable between reflective and transmissive modes", Appl. Opt, 49, pp.4774~4779 (2010)
- H. K. Shin, "Stereoscopic three-dimensional display based on polarization-switching device with low cross talk and high contrast ratio", Opt. Lett, 35, pp.2227~2229 (2010)
- S. T. Wu, "Reflective Liquid Crystal Displays" (2001), Wiley
- T. Maeda, "Reflective and transflective color LCDs with double polarizers", J. Soc. Inf. Display, 7, pp.9~15 (1999)
- K.-H. Kim, "Long-pitch cholesteric liquid crystal cell for switchable achromatic reflection", Opt. Express, 18, pp.16745~16750 (2010)
- K.-H. Kim, "Optical configurations for nematic liquid crystal device switchable between reflective and transmissive modes", Appl. Opt, 49, pp.4774~4779 (2010)
- H. Totsuka, "Suppression of haze formation on LCD glass and durability of the substrate etched by BHF", SID Int. Symp. Digest Tech. Pap, pp.164~167 (2000)
- A. Grosse, "Deep wet etching of fused silica glass for hollow capillary optical leaky waveguides in micro fluidic devices", J. Micromech. Microeng, 11, pp.257~262 (2001)
- X. W. Sun, "Improved ITO thin films with a thin ZnO buffer layer by sputtering", Thin Solid Films, 360, pp.75~81 (2000)
- "Low temperature deposition of ITO thin films by ion beam sputtering", Thin Solid Films, 377-378, pp.81~86
- T. C. Gorjanc, "Room temperature deposition of ITO using r.f. magnetron sputtering", Thin Solid Films, 413, pp.181~185 (2002)
- J. L. West, "Study of ion beam alignment of liquid crystals on polymer substrates", SID Int. Symp. Digest Tech. Pap, 1102 (2002)
- J. P. Doyle, "Ion beam alignment for liquid crystal display fabrication", Phys. Res. B, 206, pp.467~471 (2003)
- P. K. Son, "Ion beam alignment of liquid crystal on amorphous SiOX film", Mol. Cryst. Liq. Cryst, 475, pp.65~72 (2007)
- P. K. Son, "Control of liquid crystal alignment by deposition of silicon oxide thin film", Thin Solid Film, 515, pp.3102~3106 (2007)
- Y.-H. Fan, "Fast-response polymer network liquid crystals for optical communications", SID Int. Symp. Digest Tech. Pap, 35, pp.1526~1529 (2004)
- S. R. Lee, "Initially π-twisted nematic liquid crystal cell stabilized by a fluorinated polymer wall", Appl. Phys. Lett, 90, pp.163513-1~163513-3 (2007)
- C. Y. Huang, "Fast switching of polymer-stabilized liquid crystal pi cells", Appl. Phys. Lett, 90, pp.171918~ (2007)
- J.-I. Baek, "Fast switching of vertical alignment liquid crystal cells with liquid crystalline polymer networks", Jpn. J. Appl. Phys, 48, pp.056507-1~056507-5 (2009)
- 진혜정, "폴리머 네트워크가 형성된 TN 액정셀의 고속응답 특성", 한국광학회지, 21(2), pp.69~73 (2010), 한국광학회
- D. H. Song, "Multi-dimensional liquid crystal alignment effect of polymer wall on vertically aligned liquid crystal cell", Jpn. J. Appl. Phys, 49, pp.011702-1~011702-4 (2010)
- H. Imayama, "Novel pixel design for a transflective IPS LCD with an in-cell retarder", SID Int. Symp. Digest Tech. Pap, 38, pp.1651~1654 (2007)
- 이원석, "A Highly Efficient Organic Light-Emitting Diode with an Imprinted In-Cell Polarizer for Backlight Applications", Journal of Information Display, 9(4), pp.11~14 (2008), 한국정보디스플레이학회
