루프 종류의 FSS가 결합된 복합재료 구조의 잔류응력과 전파 투과 특성
Study on Thermal Residual stresses and Transmission Characteristics in Loop Type Frequency Selective Surface Embedded Composite Structures
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 논문은 Loop 종류의 주파수 선택적 투과구조(FSS)를 결합시킨 복합재료 구조의 잔류응력으로 인한 층간분리, FSS의 손상 등 구조적 파손과 잔류응력으로 인해 변형된 FSS의 전파 투과 특성의 영향을 연구하였다. FSS는 단위요소 종류, 설계 변수, 배열에 따라 일정 대역에 전파를 투과 혹은 반사시킬 수 있다. 그래서 사각 루프 FSS를 복합재료와 결합시켰을 때 X-band(8~12 GHz)에서 공진이 발생하도록 설계한 후, 그에 따른 치수를 규격화하여 다른 루프형상(삼각 루프, 원형 루프)에 적용하고 단일 Loop와 이중 Loop 구조일 때 복합재료의 적층을 변화시켜 비교 분석하였다.
Abstract
In this paper, the delamination and deformed FSS caused by residual stresses in the Loop type FSS embedded composites and the transmission characteristic changes due to deformation of FSS by residual stresses were studied. FSS may have different electromagnetic characteristics depending on the type of element, design variables, and array. Therefore, design variables of square loop FSS embedded composites structures were determined to obtain the transmission characteristic for X-band (8~12 GHz). Then the design variables of other types of loops (triangular loop and circular loop) were determined based on the dimensions of square loop. Thereafter, the residual stresses and transmission characteristics of FSS embedded composite structures with various single and double loop FSS's, and stacking sequence of composite laminates were compared.
참고문헌 (9)
- Jenn, D. C., "Radar and Laser Cross Section Engineering", pp.1~13 (1995), American Institute Aeronautics and Astronautics Inc.
- Chen, H., "Design of Frequency-selective Surfaces Radome for a Planar Slotted Waveguide Antenna", IEEE Trans. Antennas and Wireless Propagation Letters, 8(3), pp.1231~1233 (2008)
- Wahid, M., "Band Pass Radomes for Reduced RCS", IEE Colloquium on. Antenna Radar Cross-Section, pp.4 (1991), 1~4[DOI]
- Munk, B. A., "Frequency Selective Surfaces : Theory and Design" (2000), John Wiley & Sons, Inc.
- Kim, P. C., "EM characteristics of the RAS composed of E-glass", epoxy composite and single dipole FSS element, 2006, pp.75(1), 601~609[DOI]
- Kim, P. C., "Improvement of Bonding Characteristics Between the Frequency Selective Surface and E-glass", epoxy Composite, 2009, pp.23, 215~227
- Seo, I. S., "The Effects of Bonding Characteristics of FSS in Hybrid Structure", Proceeding of the Korea Institute of Military Science and Technology conference 2010, pp.581~584 (2010)
- 김가연, "주파수 선택적 투과막이 결합된 복합재료의 잔류응력평가 및 선택적 투과막 설계", Composites Research, 24(1), pp.37~44 (2011), 한국복합재료학회
- Lee, K. Y., "Simple Design Method of FSS Radome Analysis Using Equivalent Circuit Model", IEICE Electronics Express, 8(23), pp.2002~2009 (2011)