유리섬유 부직포가 삽입된 풍력 블레이드 인발 성형 스파캡 소재의 파괴인성 특성 평가
Evaluation of Fracture Toughness Characteristics of Pultruded CFRP Spar-Cap Materials with Non-woven Glass Fabric for Wind Blade
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The purpose of this study is to evaluate the inter-laminar fracture toughness characteristics of CFRP pultrusion spar cap materials reinforced with non-woven glass fabric. Test specimens were fabricated by the infusion technique. A non-woven glass fabric and artificial defects were embedded on the middle surface between two pultruded CFRP panels. Double cantilever beam (DCB) and End Notched Flexure (ENF) tests were performed according to ASTM standards. Fracture toughness and crack propagation characteristics were evaluated with load-displacement curves and delamination resistance curves (R-Curve). The fracture toughness results were calculated by compliance calibration (CC) method. The initiation and propagation values of Mode-I critical strain energy release rate value were 1.357 kJ/m2 and 1.397 kJ/m2 , respectively, and Mode-II critical strain energy release rate values were 4.053 kJ/m2 for non-precracked test and 4.547 kJ/m2 for precracked test. It was found that the fracture toughness properties of the CFRP pultrusion spar-cap are influenced by the interface between the layers of CFRP and glass fiber non-woven.
Abstract
The purpose of this study is to evaluate the inter-laminar fracture toughness characteristics of CFRP pultrusion spar cap materials reinforced with non-woven glass fabric. Test specimens were fabricated by the infusion technique. A non-woven glass fabric and artificial defects were embedded on the middle surface between two pultruded CFRP panels. Double cantilever beam (DCB) and End Notched Flexure (ENF) tests were performed according to ASTM standards. Fracture toughness and crack propagation characteristics were evaluated with load-displacement curves and delamination resistance curves (R-Curve). The fracture toughness results were calculated by compliance calibration (CC) method. The initiation and propagation values of Mode-I critical strain energy release rate value were 1.357 kJ/m2 and 1.397 kJ/m2 , respectively, and Mode-II critical strain energy release rate values were 4.053 kJ/m2 for non-precracked test and 4.547 kJ/m2 for precracked test. It was found that the fracture toughness properties of the CFRP pultrusion spar-cap are influenced by the interface between the layers of CFRP and glass fiber non-woven.
참고문헌 (17)
- Leung, D. Y., "Wind energy development and its environmental impact: A review", Renewable and sustainable energy reviews, 16(1), pp.1031~1039 (2012)
- A manual for the economic evaluation of energy efficiency and renewable energy technologies, "Short, W.", Renewable Energy, National Renewable Energy Lab.(NREL), ~, pp.No. NREL (1995), TP-462-5173
- Bruck, M., "A Levelized Cost of Energy (LCOE) model for wind farms that include Power Purchase Agreements (PPAs)", Renewable Energy, 122(2), pp.131~139 (2018)
- Betz, A., "Introduction to the Theory of Flow Machines" (2014), Elsevier
- Reddy, S. S. P., "Use of composite materials and hybrid composites in wind turbine blades", Materials Today: Proceedings, 46(Part 7), pp.2827~2830 (2021)
- "HIGH PERFORMANCE PULTRUSION FOR ADVANCED COMPOSITES (HIPPAC)" (2020)[URL]
- "Wind blade spar caps:Pultruded to perfection?" (2018)[URL]
- Motamedi, D., "Nonlinear XFEM Modeling of Mode II Delamination in PPS", Glass Unidirectional Composites with Uncertain Fracture Properties, 2020, pp.13(16), 3548~
- Li, M., "Temperature and moisture effects on composite materials for wind turbine blades", Master, pp.2000
- 김학근, "풍력터빈용 블레이드의 유리섬유 2축", 3축 적층하이브리드 복합재 특성을 고려한 층간파괴인성 평가, 2021, pp.12(3), 68~79[DOI]
- Yan, X., "Mode-II fracture toughness and crack propagation of pultruded carbon Fiber-Epoxy composites", Engineering Fracture Mechanics, 279, pp.109042~ (2023)
- "ZOLTEK Pultruded Profiles" (2018)[URL]
- Kravchenko, O. G., "Thickness dependence of mode I interlaminar fracture toughness in a carbon fiber thermosetting composite", Composite Structures, 160, pp.538~546 (2017)
- Farmand-Ashtiani, E., "Specimen thickness dependence of large scale fiber bridging in mode I interlaminar fracture of carbon epoxy composite", International Journal of Solids and Structures, 55, pp.58~65 (2015)
- Agrawal, A., "Analysis of specimen thickness effect on interlaminar fracture toughness of fibre composites using finite element models", Composites science and technology, 63(10), pp.1393~1402 (2003)
- ASTM International, "Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites, ASTM D5528", ~ (2021)
- ASTM International, "Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites, ASTM D7905", D7905M, 2019