초고층빌딩 경량화를 위한 복합신소재 슬래브에 관한 연구
A Study of the Advanced Composite Material Slab for Light Weight of Tall Building
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
대형구조물 설계 건설시 가장 큰 제약은 모든 건설재료에는 치수의 한계가 있다. 본 논문에서는 고전적인 보이론에 의하여 단순 지지된 비등방성 슬래브의 처짐값을 구한 후 그 값을 비교하였고, 특별 직교이방성 판 이론에 의하여 콘크리트와 샌드위치 교량의 물성을 비교하여 그 결과에 따른 처짐비와 강성값을 비교하였다. 경계조건은 임의의 경계조건을 갖는 판에 대한 해석해가 없기 때문에 부득이하게 네변이 모두 단순지지 되었을 경우로 해석을 하였고 복합재료의 인장강도는 콘크리트나 강재보다 훨씬 높으므로 비교대상은 처짐으로 하였다. 즉, 철근콘크리트 슬래브보다 자중이 1/10이면서 처짐이 작은 몇 가지 형태의 샌드위치패널을 고려하였다.
Abstract
For each construction material used, there is certain theoretical limit in sizes. For tall building construction, the reduction in slab weight is the first step to take in order to break such size limits. In this paper, the feasibility of such objective is proven and given by numerical analysis result. For a typical building slab, both concrete and advanced composite sandwich panels are considered. The concrete slab is treated as a special orthotropic plate to obtain more accurate result. For each panel, the deflection under the dead and live loads is compared, since both tensile and compressive strengths of the composites are far more higher than those of concrete. All types of sandwich panels considered, except one case, have self-weights less than one tenth of that of the reinforced concrete slab, with deflections less than that of the reinforced concrete slab.
참고문헌 (15)
- Meier, U, "Proposal for a CFRP Bridge Across the Straight ofGibraltar at Its Narrowest Site", Proc. 14th Reinforced PlasticsCongress (1984)
- Kim, D.H, "Simple Method of Analysis for Preliminary Design of Certain Composite Laminated Primary for Civil ConstructionII", Journal of Material Technology (1993)
- Kim, D.H, "Composite Structures for Civil and ArchitecturalEngineering" (1995), E&FN SPON, Chapman & Hall
- 김덕현, "탄성지지된 3경간 철근콘크리트 교량의 간단한 진동해석법", Composites Research, 17(3), pp.23~28 (2004), 한국복합재료학회
- Han, B.K, "Analysis of Steel Bridges by Meansof Specially Orthotropic Plate Theory", Journal of Korean Societyof Steel Construction, 13(1), pp.61~69 (2001)
- 한봉구, "특별직교이방성 슬래브 교량의 파괴시 치수효과에 관한 연구", Composites Research, 23(1), pp.23~30 (2010), 한국복합재료학회
- Kim, D.H, "SimpleMethods of Vibration Analysis of Three Span ContinuousReinforced Concrete Bridge with Elastic Intermediate Supports", Proceeding of the Advances in Structural Engineering andMechanics, 2, pp.1279~1284 (1999)
- Kim, D.H, "A Simple Method of Obtaining ‘Exact’ Values ofthe Natural Frequencies of Vibration for Some CompositeLaminated Structures for Civil Construction", Proc. of the SecondInternational Symposium on Textile Composites in BuildingConstruction, pp.23~25 (1992)
- Han, B. K, "Size", Scale Effects in theFailure of Simply Supported Sandwich Bridge, 2003, pp.1, 333~338
- Tsai, S.S.W, "Composite Design", pp.1~ (1988), Think Composite, Dayton,OH
- Goldberg, "The Effect of Neglectingthe Radial Moment Term in Analyzing a Sectorial Plate byMeans of Finite Differences", Proc. of the Seventh InternationalSymposium on Space Technology and Sciences (1967)
- Stephen P, "Theory ofPlates and Shells, Second Edition" (1989), Mcgraw Hill Book Co
- Ashton, J.E, "Anisotropic Plate Analysis-Boundary Condition", Journal of Composite Materials, pp.162~171 (1970)
- Whitney, J. M, "Analysis of a Simply SupportedLaminated Anisotropic Rectangular Plate", Journal ofAIAA, 8(1), pp.28~33 (1970)
- Pagano, N.J, "Exact Solution for Rectangular BidirectionalComposites and Sandwich Plates", Journal of Composites Materials, 4(1), pp.20~34 (1970)