Designing a nanocrystal-based temperature and strain multi-sensor with one-step inkjet printing
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Wearable multi-sensors based on nanocrystals have attracted significant attention, and studies on patterning technology to implement such multi-sensors are underway. Conventional patterning processes may affect material properties based on high temperatures and harsh chemical conditions. In this study, we developed an inkjet printing technique that can overcome these drawbacks through the application of patterning processes at room temperature and atmospheric pressure. Nanocrystal-based ink is used to adjust properties efficiently. Additionally, the viscosity and surface tension of the solvents are investigated and optimized to increase patterning performance. In the patterning process, the electrical, electrothermal, and electromechanical properties of the nanocrystal pattern are controlled by the ligand exchange process. Experimental results demonstrate that a multi-sensor with a temperature coefficient of resistance of 3.82 × 10-3K-1and gauge factor of 30.6 can be successfully fabricated using one-step inkjet printing.
Abstract
Wearable multi-sensors based on nanocrystals have attracted significant attention, and studies on patterning technology to implement such multi-sensors are underway. Conventional patterning processes may affect material properties based on high temperatures and harsh chemical conditions. In this study, we developed an inkjet printing technique that can overcome these drawbacks through the application of patterning processes at room temperature and atmospheric pressure. Nanocrystal-based ink is used to adjust properties efficiently. Additionally, the viscosity and surface tension of the solvents are investigated and optimized to increase patterning performance. In the patterning process, the electrical, electrothermal, and electromechanical properties of the nanocrystal pattern are controlled by the ligand exchange process. Experimental results demonstrate that a multi-sensor with a temperature coefficient of resistance of 3.82 × 10-3K-1and gauge factor of 30.6 can be successfully fabricated using one-step inkjet printing.
참고문헌 (16)
- 장재식, "집적광학 바이오케미컬 센서에 적합한 Si3N4", SiO2 슬롯 및 릿지-슬롯 광 도파로 제원 최적화 및 감지도 해석, 2021, pp.30(3), 139~147[DOI]
- 허신, "새우양식 환경 모니터링을 위한 센서기술 동향 분석", 센서학회지, 30(3), pp.154~164 (2021), 한국센서학회
- H. Joh, "Engineering the charge transport of Ag nanocrystals for highly accurate, wearable temperature sensors through allsolution processes", Small, 13(24), pp.1700247~ (2017)
- H. Kim, "Chemically Designed Metallic", Insulating Hybrid Nanostructures with Silver Nanocrystals for Highly Sensitive Wearable Pressure Sensors, 2018, pp.10(1), 1389~1398
- S. W. Lee, "Transition States of Nanocrystal Thin Films During Ligand Exchange Processes for Potential Application in Wearable Sensors", ACS Appl. Mater. & Interfaces, 10(30), pp.25502~25510 (2018)
- W. S. Lee, "Multi-axial and transparent strain sensors based on synergetically reinforced and orthogonally cracked hetero-nanocrystal solids", Adv. Funct. Mater, 29(4), pp.1806714~ (2019)
- H. Joh, "Surface Design of Nanocrystals for High-Performance Multifunctional Sensors in Wearable and Attachable Electronics", Chem. Mater, 31(2), pp.436~444 (2019)
- H. K. Woo, "One-step chemical treatment to design ideal nanospacer structure for highly sensitive and transparent pressure sensor", J. Mater. Chem. C, 7(17), pp.5059~5066 (2019)
- S. Jeon, "Investigation of chemical effect of solvent during ligand exchange on nanocrystal thin films for wearable sensor applications", J. Phys. Chem. C, 123(17), pp.11001~11010 (2019)
- J. Bang, "Highly Sensitive Temperature Sensor: Ligand-treated Ag Nanocrystal thin films on PDMS with Thermal Expansion Strategy", Adv. Funct. Mater, 29(32), pp.1903047~ (2019)
- J. Ahn, "Chemical Effect of Halide Ligands on the Electromechanical Properties of Ag Nanocrystal Thin Films for Wearable Sensors", J. Phys. Chem. C, 123(29), pp.18087~18094 (2019)
- B. K. Jung, "Janus-like Jagged Structure with Nanocrystals for Self-sorting Wearable Tactile Sensor", ACS Appl. Mater. & Interfaces., 13(5), pp.6394~6403 (2021)
- T. Park, "Non-Interference Wearable Strain Sensor : Near-Zero Temperature Coefficient of Resistance Nanoparticle Arrays with Thermal Expansion and Transport Engineering", ACS Nano., 15(5), pp.8120~8129 (2021)
- C. R. Kagan, "Charge transport in strongly coupled quantum dot solids", Nat. Nanotechnol., 10(12), pp.1013~1026 (2015)
- J. H. Choi, "Bandlike transport in strongly coupled and doped quantum dot solids : a route to high-performance thinfilm electronics", Nano Lett., 12(5), pp.2631~2638 (2012)
- R. C. Doty, "Temperature-dependent electron transport through silver nanocrystal superlattices", J. Phys. Chem. B, 105(35), pp.8291~8296 (2001)