UAS, CRP 및 지상 LiDAR 융합기반 와형석조여래불의 3차원 재현과 고증 연구
A Study on the 3D Reconstruction and Historical Evidence of Recumbent Buddha Based on Fusion of UAS, CRP and Terrestrial LiDAR
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
최근, 2019년 4월 15일에 있었던 노트르담 대성당 화재로 문화재 복원 및 재현에 대해 2008년 숭례문 화재사건 이후 관심이 다시 한 번 집중되고 있다. 특히, 기존에 활용되던 LiDAR 및 광파기 측량 등을 활용한 문화재 실측을 다양한 3차원 재현 기술을 활용하여 복원 및 재현하려는 연구가 활발히 진행되고 있다. 본 연구는 운주사의 와형석조여래불을 대상으로 최근 4차 산업혁명 시대에서 핵심기술로 자리매김한 UAV(Unmanned Aerial Vehicle)의 무인항공영상와 기존에 사진측량에 활용되던 근접영상(CRP) 및 지상 LiDAR 스캐닝을 활용하여 데이터를 획득하고, 이들을 3가지 융합모델로 SfM기반의 3차원 재현을 실시, 모델의 재현도 및 정확도를 비교·분석하였다. 아울러, 3가지의 모델 중 가장 우수한 융합모델을 활용하여 11세기 초 고려시대의 불교 천문학적 고증이 녹아있는 와형석조여래불을 실세계 좌표기반으로 북극성과의 연관성을 확인한다. 본 연구를 통해 문화재의 단순한 외형적인 3차원 재현뿐 아니라 문화재에 담긴 역사적 고증을 확인함으로써 문화재의 종류 및 형태에 따라 고증까지 함께 재현하는 방안을 모색하였다.
Abstract
Recently, Interest in the restoration and 3D reconstruction of cultural properties due to the fire of Notre Dame Cathedral on April 15, 2019 has been focused once again after the 2008 Sungnyemun fire incident in South Korea. In particular, research to restore and reconstruct the actual measurement of cultural properties using LiDAR(Light Detection and ranging) and conventional surveying, which were previously used, using various 3D reconstruction technologies, is being actively conducted. This study acquires data using unmanned aerial imagery of UAV(Unmanned Aerial Vehicle), which has recently established itself as a core technology in the era of the 4th industrial revolution, and the existing CRP(Closed Range Photogrammetry) and terrestrial LiDAR scanning for the Recumbent Buddha of Unju Temple. Then, the 3D reconstruction was performed with three fusion models based on SfM(Structure-from-Motion), and the reproducibility and accuracy of the models were compared and analyzed. In addition, using the best fusion model among the three models, the relationship with the Polar Star(Polaris) was confirmed based on the real world coordinates of the Recumbent Buddha, which contains the astronomical history of Buddhism in the early 11th century Goryeo Dynasty. Through this study, not only the simple external 3D reconstruction of cultural properties, but also the method of reconstructing the historical evidence according to the type and shape of the cultural properties was sought by confirming the historical evidence of the cultural properties in terms of spatial information.
참고문헌 (36)
- 강준오, "지상 LiDAR 및UAS 기반 퇴적암벽의 3D 모델 구현", 대한공간정보학회 학술대회, pp.339~340 (2018)
- 고춘심, "운주사 연구", 박사, 국어교육학, pp.2007
- 김달주, "석조물의 3차원 모델링을위한 3가지 RGB 영상의 조합 해석", 한국측량학회 학술대회, pp.239~241 (2017)
- 김일권, "화순 운주사 북두칠성 원반석과 산정와불의 고려천문학", 한국학, 37(2), pp.182~213 (2014), 한국학중앙연구원[DOI]
- 김창현, "고려시대 능성 운주사에 대한 탐색", 史叢(사총), (72), pp.27~74 (2011), 역사연구소[DOI]
- 김태훈, "드론을 이용한 건축물의 공간정보 구축", 건축, 62(11), pp.39~42 (2018), 대한건축학회
- 성지훈, "저가형 UAV 영상의 영상향상기법에 따른 결과 분석", 대한공간정보학회지, 25(3), pp.3~12 (2017), 대한공간정보학회[DOI]
- 엄대용, "회전익 드론의 다각도 영상을 이용한공간객체의 측위 정확도 향상방안 연구", 한국측량학회 학술대회, pp.146~148 (2016)
- 오성종, "UAS 및 지상 LiDAR 융합기반 문화재3D 재현과 고증에 관한 연구", 석사, pp.2020
- 이동국, "회전익 드론 및 3D 스캐너를 통한 모델링 성과의 비교", 한국측량학회 학술대회, pp.184~186 (2017)
- 이석배, "UAV와 LiDAR측량에 의한 목조문화재의 재현", 대한공간정보학회지, 27(6), pp.53~59 (2019), 대한공간정보학회[DOI]
- 이용창, "UAS 영상기반 공간정보해석" (2017), 인천대학교 도서출판부
- 이용창, "UAS 영상기반 문화유산물의 정밀 3차원 현상 모델링", 지적과 국토정보, 49(1), pp.85~101 (2019), 한국국토정보공사[DOI]
- 이용창, "RTCM-SSR 보정요소 기반 1주파 Multi-GNSS 실시간 측위의 효용성 평가", 지적과 국토정보, 50(1), pp.107~123 (2020), 한국국토정보공사[DOI]
- 이장존, "화순 운주사 마애여래좌상의 암석학적 특성 및 손상도 평가", 보존과학회지, 33(1), pp.1~10 (2017), 한국문화재보존과학회[DOI]
- 이호진, "문화재 3차원 모델링을 위한 지상 LiDAR와 UAV 정확도 비교 연구", 지적과 국토정보, 47(1), pp.179~190 (2017), 한국국토정보공사[DOI]
- 한수희, "무인항공기를 이용한 고해상도, 고선명 영상의 촬영 및 고정밀 항공삼각측량", 대한공간정보학회지, 25(3), pp.101~109 (2017), 대한공간정보학회[DOI]
- 한승희, "UAS 및 지상LiDAR 융합기반 건축물의 3D 재현", 도시과학, 7(2), pp.53~60 (2018)
- 허의행, "유적탐색을 위한 드론과 항공사진의 활용방안 연구", 문화재, 51(2), pp.22~37 (2018), 국립문화재연구소[DOI]
- Dameng Yin, "Individual mangrove tree measurement using UAV-based LiDAR data : Possibilities and challenges", Remote Sensing of Environment, 223, pp.34~49 (2019)
- Farid Javadnejad, "Small Unmanned Aircraft System (UAS) for Engineering Inspections and Geospatial Mapping", pp.2017
- Javier FL, "Improving Archaeological Prospection Using Localized UAVs assisted Photogrammetry : An Example from the Roman Gold District of the Eria River Valley", Journal of Archaeological Science, 5, pp.509~520 (2016)
- Jakub L, "3D reconstruction of an Abandoned Montane Reservoir Using UAV Photogrammetry, Aerial LiDAR and Field Survey", Applied Geography, 98, pp.9~21 (2018)
- J. S. Pozo-Antonio, "Quantification and Mapping of Deterioration Patterns on Granite Surfaces by Means of Mobile LiDAR Data", Measurement, 140, pp.227~236 (2019)
- SW Kwon, "Smart Merging Method for Hybrid Point Cloud Data Using UAV and LIDAR in Earthwork Construction", Creative Construction Conference Primosten Croatia, pp.19~22 (2017)
- YJ Park, "Creating 3D city Models with Building Footprints and LIDAR Point Cloud Classification: A Machine Learning Approach, Computers, Environment and Urban Systems", Article in Computers Environment and Urban Systems, 75, pp.76~89 (2019)
- 운주사종합학술조사, "운주사종합학술조사", 전남대학교 박물관, ~ (1991)
- "숭례문 되살린 3D 레이저 스캔" (2013)[URL]
- 국토지리정보원, "무인비행장치 이용 공공측량 작업지침 고시 제 2018-1075호", ~ (2018)
- 문화재청, "국보·보물 건조물 문화재 정밀실측 지침", ~ (2014)
- "이미지센서 (CCD, CMOS)" (2008)[URL]
- "“역사가 불탔다”... 노트르담 대성당화재에 숭례문 데자뷔" (2019)[URL]
- "애플" (2021)[URL]
- "캐논" (2021)[URL]
- "디제이아이" (2021)[URL]
- "트림블" (2021)[URL]
