파티클보드에 보강된 유리섬유의 layer 수가 기계적 성질에 미치는 영향
The effect of mechanical properties on the particleboard reinforced with fiberglass layer number
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This research examined the technical feasibility of composite that had 2- and 3- layers of fiberglass reinforcement to enhance the load carrying capacity of particleboard. Specimens were prepared from commercial particleboard. Results indicated that bending properties, hardness and impact bending energy increased as the number of layers of fiberglass reinforcement increased. The wood screw withdrawal load only decreased at the 3-layer of fiberglass reinforcement. The technique developed by this study may increase an opportunity to use particleboard for structural purposes.
Abstract
This research examined the technical feasibility of composite that had 2- and 3- layers of fiberglass reinforcement to enhance the load carrying capacity of particleboard. Specimens were prepared from commercial particleboard. Results indicated that bending properties, hardness and impact bending energy increased as the number of layers of fiberglass reinforcement increased. The wood screw withdrawal load only decreased at the 3-layer of fiberglass reinforcement. The technique developed by this study may increase an opportunity to use particleboard for structural purposes.
참고문헌 (18)
- 이 종영, "합판 보드산업의 현황과 과제", 제5회 한국 합판,MDF,파티클보드 심포지움, pp.11~32 (2008), 합판,보드협회
- 차재경, "VARTM(Vacuum Assisted Resin Transfer Molding) 방법에 의해 목재 및 파티클보드를 유리섬유로 보강한 복합소재의 성질", 목재공학, 35(3), pp.29~35 (2007), 한국목재공학회
- 차재경, "국산 소경재의 휨 성질을 이용한 충격에너지와 최대하중까지 일-에너지 예측연구", 한국가구학회지, 19(5), pp.350~357 (2008), 한국가구학회
- 차재경, "유리섬유로 보강된 제재목의 기계적 성질에 대한 연구", 한국가구학회지, 20(4), pp.281~289 (2009), 한국가구학회
- 김광철, "목재 폐기물 재활용의 의의 및 필요성에 대한 고찰", 한국가구학회지, 20(1), pp.31~41 (2009), 한국가구학회
- American Society for Testing and Materials.1986.Standard test method of evaluating the properties of wood-base fiber and particle panel materials,ASTM D, "Standard test method of evaluating the properties of wood-base fiber and particle panel materials, ASTM D 1037", ASTM, ~
- American Society for Testing and Materials.1986.Standard test method for toughness of plywood,ASTM D, "Standard test method for toughness of plywood, ASTM D 3499", ASTM (1986)
- Biblis, E.J, "Flexural properties of southern pine plywood overlaid with fiberglass-reinforced plastic", Forest Prod. J., 50(4), pp.34~36 (2000)
- Cai,Z, "Selected properties of MDF and flakeboard overlaid with fiberglass mat", Forest Prod. J., 56(11), pp.142~146 (2006)
- Davids, W. G, "Fatigue of glulam beams with fiber-reinforced polymer tension reinforcing", Forest Prod. J., 55(1), pp.93~101 (2005)
- Gardner, D. J., "Adhesive bonding of pultruded fiber-reinforced plastic to wood", Forest Prod. J., 44(5), pp.62~66 (1994)
- Lopez-anido, R, "Adhesive bonding of eastern hemlock glulam panels with E-glass", vinyl ester reinforcement, 2000, pp.50(11), 43~47
- Pirvu, A., "Carbon fiber-vinyl ester composite reinforcement of wood using the VARTM", SCRIMP fabrication process, 2004, pp.25, 1257~1265
- Rowlands, R.E, "Fiber-reinforced wood composites", Wood and fiber science, 18(1), pp.39~57 (1986)
- Saucier, J. R, "Structural particleboard reinforced with glass fiber- progress in its development", Forest Prod. J., 25(9), pp.69~72 (1975)
- Smulski, S. J, "Flexural behavior of glass fiber reinforced hardboard", Wood and fiber science, 19(3), pp.313~327 (1987)
- Soltis, L.A, "Fiberglass reinforced bolted wood connections", Forest Prod. J., 48(9), pp.63~67 (1998)
- Spaun,F.D, "Reinforcement of wood with fiberglass", Forest Prod. J., 31(4), pp.26~33 (1981)