스러스트 볼 베어링이 적용된 왕복동형 압축기의 마찰손실 해석
Frictional Loss Analysis of a Reciprocating Compressor with Thrust Ball Bearing
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this paper, a study on the frictional losses and dynamic behaviors of a reciprocating compression mechanism used in small refrigeration compressor is performed. In the problem formulation of the compressor dynamics, the viscous frictional force between piston and cylinder wall is considered in order to determine the coupled dynamic behaviors of piston and crankshaft supported on a thrust ball bearing. The solutions of the equations of motion of the reciprocating mechanism along with the time dependent Reynolds equations for the lubricating film between piston and cylinder wall and lubricant films of the journal bearings are obtained simultaneously. The hydrodynamic forces of journal bearings are calculated using finite bearing model and Gûmbel boundary condition. And, a Newton-Raphson procedure was employed in solving the nonlinear equations of piston and crankshaft with a thrust ball bearing. The results explored the effects of design parameters on the frictional losses and dynamic stability of the compression mechanism.
Abstract
In this paper, a study on the frictional losses and dynamic behaviors of a reciprocating compression mechanism used in small refrigeration compressor is performed. In the problem formulation of the compressor dynamics, the viscous frictional force between piston and cylinder wall is considered in order to determine the coupled dynamic behaviors of piston and crankshaft supported on a thrust ball bearing. The solutions of the equations of motion of the reciprocating mechanism along with the time dependent Reynolds equations for the lubricating film between piston and cylinder wall and lubricant films of the journal bearings are obtained simultaneously. The hydrodynamic forces of journal bearings are calculated using finite bearing model and Gûmbel boundary condition. And, a Newton-Raphson procedure was employed in solving the nonlinear equations of piston and crankshaft with a thrust ball bearing. The results explored the effects of design parameters on the frictional losses and dynamic stability of the compression mechanism.
참고문헌 (10)
- Nishiwaki, F, "Mechanical Loss Reduction at Thrust Bearings of Scroll Compressors Using R407C", Proc. of International Compressor Engineering Conference at Purdue, pp.263~268 (1996)
- Tsubono, I, "Analysis of the Performance of Scroll Compressors Using R410A", Proc. of the International Symposium on HCFC Alternative Refrigerants ’98, pp.50~54 (1998)
- Ashitani, H, "Contact and High-efficiency Scroll Compressor", Matsushita Technical Journal, 47(2), pp.75~79 (2001)
- Brewe, D. E, "Theoretical Modeling of the Vapor Cavitation in Dynamically Loaded Journal Bearings", ASME Journal of Tribology, 108, pp.628~638 (1986)
- Kim, T. J, "Dynamic Behavior Analysis of Scroll Compressor Crankshaft Considering a Cavitation Phenomenon in Dynamically Loaded Journal Bearings", Transaction of KSME, A, 22(8), pp.1375~1389 (1998)
- 김태종, "가변속 왕복동형 압축기 크랭크축-베어링 계의 동적 거동 해석", 한국윤활학회지, 17(6), pp.426~434 (2001)
- A Numerical Approach for Piston Secondary Motion Analysis and its Application to the Piston Related Noise, "Nakada, T", ~, pp.SAE paper No. 972043 (1997)
- Prata, A. T, "Dynamic Analysis of Piston Secondary Motion for Small Reciprocating Compressors", Trans ASME, Journal of Tribology, 122, pp.752~760 (2000)
- 김태종, "소형 왕복동 압축기의 동적 거동 및 윤활특성 해석", 대한기계학회논문집 A, 27(7), pp.1138~1145 (2003), 대한기계학회
- Tedric A. Harris, "Rolling Bearing Analysis, Fifth Edition" (2006), Taylor & Francis Group