The influence of starting powder characteristics on the performance of MoSi2-based heating elements
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The influence of starting powder characteristics, involving purity and particle size, on the properties and performance of MoSi2-based heating elements was investigated in this study. Compared to a fine powder, densification of the green rods with a coarse powder should be carried out at a higher temperature. This creates a Mo5Si3 layer with a poor capability of a protective SiO2 film formation on the surface. Another negative impact of the high densification temperature is that the rods cannot be bent to a U-shape due to the coarse crystal size. The critical damage temperature of a heating element is significantly influenced by the purity of the starting powder. Impurities will deteriorate the performance of a heating element by decreasing the critical damage temperature.
Abstract
The influence of starting powder characteristics, involving purity and particle size, on the properties and performance of MoSi2-based heating elements was investigated in this study. Compared to a fine powder, densification of the green rods with a coarse powder should be carried out at a higher temperature. This creates a Mo5Si3 layer with a poor capability of a protective SiO2 film formation on the surface. Another negative impact of the high densification temperature is that the rods cannot be bent to a U-shape due to the coarse crystal size. The critical damage temperature of a heating element is significantly influenced by the purity of the starting powder. Impurities will deteriorate the performance of a heating element by decreasing the critical damage temperature.
참고문헌 (11)
- A.K. Vasudeva, , Mater. Sci. Eng, A155, pp.1~17 (1992)
- J.J. Petrovic, , Mat. Res. Soc. Symp. Proc, 322, pp.3~8 (1994)
- J.J. Petrovic, , Ceramic Engineering & Science Proceedings, 18, pp.3~17 (1997)
- Kanthal, "Kanthal Super Handbook", ~ (1999)
- Kanthal, "Kanthal Super", ~ (1900)
- A. Mueller, , Mater. Sci. Eng. A, 155, pp.199~207 (1992)
- A. J. Moulson, "Electroceramics: Materials, Properties, Applications", pp.141~ (2003), John Wiley & Sons Ltd
- S.K. Mishra, , Key Engineering Materials, 395, pp.15~38 (2009)
- D.A. Berztiss, , Mater. Sci. Eng. A, 155, pp.165~182 (1992)
- R.W. Bartlett, , Transactions of the metallurgical society of AIME, 233, pp.968~974 (1965)
- M.J. Matthewson, , J. Am. Ceram. Soc, 69, pp.815~821 (1986)