본문 바로가기
KERD
논문KCI 등재

Multi-objective optimization of printed circuit heat exchanger with airfoil fins based on the improved PSO-BP neural network and the NSGA-II algorithm

Wang Jiabing|Zeng Linlang|Yang Kun
한국원자력학회 (Korean Nuclear Society)|2023.06|Nuclear Engineering and Technology|제55권 제6호|pp. 2125-2138|DOI 10.1016/j.net.2023.02.029

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

Design of experimentParticle swarm optimization algorithmMulti-objective optimizationBP neural networkPrinted circuit heat exchangerAirfoil fin
주제분류원자력공학

초록

The printed circuit heat exchanger (PCHE) with airfoil fins has the benefits of high compactness, high efficiency and superior heat transfer performance. A novel multi-objective optimization approach is presented to design the airfoil fin PCHE in this paper. Three optimization design variables (the vertical number, the horizontal number and the staggered number) are obtained by means of dimensionless airfoil fin arrangement parameters. And the optimization objective is to maximize the Nusselt number (Nu) and minimize the Fanning friction factor (f). Firstly, in order to investigate the impact of design variables on the thermal-hydraulic performance, a parametric study via the design of experiments is proposed. Subsequently, the relationships between three optimization design variables and two objective functions (Nu and f) are characterized by an improved particle swarm optimization-backpropagation artificial neural network. Finally, a multi-objective optimization is used to construct the Pareto optimal front, in which the non-dominated sorting genetic algorithm II is used. The comprehensive performance is found to be the best when the airfoil fins are completely staggered arrangement. And the best compromise solution based on the TOPSIS method is identified as the optimal solution, which can achieve the requirement of high heat transfer performance and low flow resistance

Abstract

The printed circuit heat exchanger (PCHE) with airfoil fins has the benefits of high compactness, high efficiency and superior heat transfer performance. A novel multi-objective optimization approach is presented to design the airfoil fin PCHE in this paper. Three optimization design variables (the vertical number, the horizontal number and the staggered number) are obtained by means of dimensionless airfoil fin arrangement parameters. And the optimization objective is to maximize the Nusselt number (Nu) and minimize the Fanning friction factor (f). Firstly, in order to investigate the impact of design variables on the thermal-hydraulic performance, a parametric study via the design of experiments is proposed. Subsequently, the relationships between three optimization design variables and two objective functions (Nu and f) are characterized by an improved particle swarm optimization-backpropagation artificial neural network. Finally, a multi-objective optimization is used to construct the Pareto optimal front, in which the non-dominated sorting genetic algorithm II is used. The comprehensive performance is found to be the best when the airfoil fins are completely staggered arrangement. And the best compromise solution based on the TOPSIS method is identified as the optimal solution, which can achieve the requirement of high heat transfer performance and low flow resistance

참고문헌 (59)

  1. B.W. Brook, "Why nuclear energy is sustainable and has to be part of the energy mix", Sustain.Mater. Technol, 1-2, pp.8~16 (2014)
  2. D.O.E. US, "A technology roadmap for generation IV nuclear energy systems", Nuclear Energy Research Advisory Committee and the Generation IV International Forum, pp.48~52 (2002)
  3. N. Bartel, "Comparative analysis of compact heat exchangers for application as the intermediate heat exchanger for advanced nuclear reactors", Ann. Nucl. Energy, 81, pp.143~149 (2015)
  4. X. Li, "Heat exchangers for the next generation of nuclear reactors", International Congress on Advances in Nuclear Power Plants (ICAPP) 2006 (2006)
  5. S. K. Mylavarapu, "Fabrication and design aspects of high-temperature compact diffusion bonded heat exchangers", Nucl. Eng. Des, 249, pp.49~56 (2012)
  6. L. Chai, "A review of printed circuit heat exchangers for helium and supercritical CO2 Brayton cycles", Therm. Sci. Eng. Prog, 18, pp.100543~ (2020)
  7. T. Ma, "Effect of fin-endwall fillet on thermal hydraulic performance of airfoil printed circuit heat exchanger", Appl. Therm. Eng, 89, pp.1087~1095 (2015)
  8. S. H. Yoon, "Assessment of straight, zigzag, S-shape, and airfoil PCHEs for intermediate heat exchangers of HTGRs and SFRs", Nucl. Eng. Des, 270, pp.334~343 (2014)
  9. G. Liao, "A review on the thermal-hydraulic performance and optimization of compact heat exchangers", Energies, 14(19), pp.6056~ (2021)
  10. T. Ishizuka, "Thermal-hydraulic characteristics of a printed circuit heat exchanger in a supercritical CO_2 loop", Proceedings of the 11th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, pp.218~232 (2005)
  11. S. M. Lee, "Comparative study on performance of a zigzag printed circuit heat exchanger with various channel shapes and configurations", Heat Mass Tran, 49, pp.1021~1028 (2013)
  12. S. M. Lee, "A parametric study of the thermal-hydraulic performance of a zigzag printed circuit heat exchanger", Heat Tran. Eng, 35, pp.1192~1200 (2014)
  13. T. L. Ngo, "New printed circuit heat exchanger with S-shaped fins for hot water supplier", Exp. Therm. Fluid Sci, 30, pp.811~819 (2006)
  14. T. L. Ngo, "Heat transfer and pressure drop correlations of microchannel heat exchangers with S-shaped and zigzag fins for carbon dioxide cycles", Exp. Therm. Fluid Sci, 32, pp.560~570 (2007)
  15. D. E. Kim, "Numerical investigation on thermalehydraulic performance of new printed circuit heat exchanger model", Nucl. Eng. Des, 238, pp.3269~3276 (2008)
  16. X. Xu, "Optimization of fin arrangement and channel configuration in an airfoil fin PCHE for supercritical CO2 cycle", Appl. Therm. Eng, 70, pp.867~875 (2014)
  17. W. X. Chu, "Study on hydraulic and thermal performance of printed circuit heat transfer surface with distributed airfoil fins", Appl. Therm. Eng, 114, pp.1309~1318 (2017)
  18. F. Chen, "Comprehensive performance comparison of airfoil fin PCHEs with NACA 00XX series airfoil", Nucl. Eng. Des, 315, pp.42~50 (2017)
  19. C. Y. Zhu, "Investigation of the flow and heat transfer characteristics of helium gas in printed circuit heat exchangers with asymmetrical airfoil fins", Appl. Therm. Eng, 186, pp.116478~ (2021)
  20. S. Soleimani, "Multi-objective optimization of 3D micro-fins using NSGA-II", Int. J. Heat Mass Tran, 197, pp.123315~ (2022)
  21. K. Deb, "A fast and elitist multiobjective genetic algorithm : NSGA-II", IEEE Trans. Evol. Comput, 6, pp.182~197 (2002)
  22. Application of Particle Swarm to Multiobjective Optimization, "J. Moore", ~ (1999)
  23. S. Mirjalili, "Multi-objective ant lion optimizer : a multiobjective optimization algorithm for solving engineering problems", Appl. Intell, 46, pp.79~95 (2017)
  24. S. Mirjalili, "Dragonfly algorithm: a new meta-heuristic optimization technique for solving single-objective, discrete, and multi-objective problems", Neural Comput. Appl, 27, pp.1053~1073 (2016)
  25. Z. Cheng, "Multi-objective optimization of self-excited oscillation heat exchange tube based on multiple concepts", Appl. Therm. Eng, 197, pp.117414~ (2021)
  26. Hong Xu, "The optimization for the straight-channel PCHE size for supercritical CO2 Brayton cycle", Nuclear Engineering and Technology, 53(6), pp.1786~1795 (2021), 한국원자력학회[DOI]
  27. S. M. Lee, "Optimization of zigzag flow channels of a printed circuit heat exchanger for nuclear power plant application", J. Nucl. Sci. Technol, 49, pp.343~351 (2012)
  28. S. M. Lee, "Multi-objective optimization of arc-shaped ribs in the channels of a printed circuit heat exchanger", Int. J. Therm. Sci, 94, pp.1~8 (2015)
  29. S. M. Lee, "Multi-objective optimization of a double-faced type printed circuit heat exchanger", Appl. Therm. Eng, 60, pp.44~50 (2013)
  30. Z. H. Rao, "Multi-objective optimization of supercritical carbon dioxide recompression Brayton cycle considering printed circuit recuperator design", Energy Convers. Manag, 201, pp.112094~ (2019)
  31. N. D. Lagaros, "Learning improvement of neural networks used in structural optimization", Adv. Eng. Software, 35, pp.9~25 (2004)
  32. K. Ermis, "ANN modeling of compact heat exchangers", Int. J. Energy Res, 32, pp.581~594 (2008)
  33. A. Ridluan, "EBaLM-THP-A neural network thermohydraulic prediction model of advanced nuclear system components", Nucl. Eng. Des, 239, pp.308~319 (2009)
  34. A. Pacheco-Vega, "Neural network analysis of fintube refrigerating heat exchanger with limited experimental data", Int. J. Heat Mass Tran, 44, pp.763~770 (2001)
  35. R. J. Schalkoff, "Artificial Neural Networks" (1997), McGraw-Hill Higher Education
  36. T. Ma, "Thermodynamic analysis and performance prediction on dynamic response characteristic of PCHE in 1000 MW S-CO2 coal fired power plant", Energy, 175, pp.123~138 (2019)
  37. F. Jin, "Optimization of zigzag parameters in printed circuit heat exchanger for supercritical CO2 Brayton cycle based on multi-objective genetic algorithm", Energy Convers. Manag, 270, pp.116243~ (2022)
  38. Y. Lee, "The effect of initial weights on premature saturation in back-propagation learning", IJCNN-91-Seattle International Joint Conference on Neural Networks, 1, pp.765~770 (1991), IEEE
  39. J. R. Zhang, "A hybrid particle swarm optimizationeback-propagation algorithm for feedforward neural network training", Appl. Math. Comput, 185, pp.1026~1037 (2007)
  40. J. Hu, "A hybrid PSO-BP algorithm and its application", 2010 Sixth International Conference on Natural Computation, 5, pp.2520~2523 (2010), IEEE
  41. J. Ren, "An improved PSO-BP network model", 2010 Third International Symposium on Information Science and Engineering, pp.426~429 (2010), IEEE
  42. Y. J. Lai, "TOPSIS for MODM", Eur. J. Oper. Res, 76, pp.486~500 (1994)
  43. C. Wang, "Design of a power conversion system for an indirect cycle, helium cooled pebble bed reactor system", Proceedings of the First International Topical Meeting on High Temperature Reactors Technology (HTR-2002) (2002)
  44. F. R. Menter, "Two-equation eddy-viscosity turbulence models for engineering applications", AIAA J, 32, pp.1598~1605 (1994)
  45. X. Cui, "Numerical study on novel airfoil fins for printed circuit heat exchanger using supercritical CO2", Int. J. Heat Mass Tran, 121, pp.354~366 (2018)
  46. S. D. Marshall, "Heat exchanger improvement via curved microfluidic channels : impacts of cross-sectional geometry and dean vortex strength", J. Heat Tran, 140, pp.011801~ (2018)
  47. S. R. Pidaparti, "Experimental investigation of thermal-hydraulic performance of discontinuous fin printed circuit heat exchangers for supercritical CO2 power cycles", Exp. Therm. Fluid Sci, 106, pp.119~129 (2019)
  48. B. Durakovic, "Design of experiments application, concepts, examples: state of the art", Period. Eng. Nat. Sci, 5, pp.421~439 (2017)
  49. D. E. Rumelhart, "Learning representations by backpropagating errors", nature, 323, pp.533~536 (1986)
  50. I. A. Basheer, "Artificial neural networks: fundamentals, computing, design, and application", J. Microbiol. Methods, 43, pp.3~31 (2000)
  51. J. Li, "Advances in Computer Science and Information Engineering", pp.553~558 (2012), Springer
  52. B. Karlik, "Performance analysis of various activation functions in generalized MLP architectures of neural networks", Int. J. Artif. Intell. Expet. Syst, 1, pp.111~122 (2011)
  53. A. Ranganathan, "The levenberg-marquardt algorithm", Tutoral on LM algorithm, 11, pp.101~110 (2004)
  54. D. Chicco, "The coefficient of determination R-squared is more informative than SMAPE, MAE, MAPE, MSE and RMSE in regression analysis evaluation", PeerJ. Comput. Sci, 7, pp.e623~ (2021)
  55. J. Kennedy, "Particle swarm optimization", Proceedings of ICNN'95-International Conference on Neural Networks, 4, pp.1942~1948 (1995), IEEE
  56. R. C. Eberhart, "Comparing inertia weights and constriction factors in particle swarm optimization", Proceedings of the 2000 Congress on Evolutionary Computation, pp.84~88 (2000), IEEE
  57. K. Hareesh, "Influence of process parameters of wire EDM on surface finish of Ti6Al4V", Mater. Today Proc, 47, pp.5017~5023 (2021)
  58. F. Calignano, "Influence of process parameters on surface roughness of aluminum parts produced by DMLS", Int. J. Adv. Manuf. Technol, 67, pp.2743~2751 (2013)
  59. D. Xu, "Morphing control of a new bionic morphing UAV with deep reinforcement learning", Aero. Sci. Technol, 92, pp.232~243 (2019)

관련 논문AI추천

Optimal Design of Compact Heat Exchanger (Louver Fin-tube Heat Exchanger for High Heat Transfer and Low Pressure Drop)강희찬한국마린엔지니어링학회 · 한국마린엔지니어링학회지2011 · 제35권 제7호Optimization of heat transfer in a vertical cylindrical tube with vertically aligned fins김은필한국마린엔지니어링학회 · 한국마린엔지니어링학회지2025 · 제49권 제4호Heat transfer optimization in a vertical cylinder tube with vertically arranged fins김은필한국마린엔지니어링학회 · 한국마린엔지니어링학회지2021 · 제45권 제3호Optimization of Heat Transfer Parameter in Fractal Tree Microchannel with Al2O3 Nano-Fluids Using Taguchi and GRA MethodBalamuruga Mohan Raj.G, E. Manikandan, G.G. Sozhamannan, K. Velmurugan, V.S.K. Venkatachalapathy청정에너지연구소 · Journal of Ceramic Processing Research2023 · 제24권 제6호Operating condition optimization of liquid metal heat pipe using deep learning based genetic algorithm: Heat transfer performance방인철, 이동훈, 진익재한국원자력학회 · Nuclear Engineering and Technology2024 · 제56권 제7호Numerical analysis of a plain-fin type heat exchanger with two tubes in a crevice-type heat pipe김은필한국마린엔지니어링학회 · 한국마린엔지니어링학회지2016 · 제40권 제8호

이 간행물의 다른 논문 (39건)

New skeletal dose coefficients of the ICRP-110 reference phantoms for idealized external fields to photons and neutrons using dose response functions (DRFs)이유미, 신방호, 염연수, 이수민, 최현준, 최지원pp. 1949-1958Method for clearance of contaminated buildings in Korea research reactor 1 and 2강민영, 송정호, 임준혁, 이준희, 김광표, 황두성, 김근호pp. 1959-1965A GPU-based point kernel gamma dose rate computing code for virtual simulation in radiation-controlled areaZou Bowen, Xu Zhihui, Li Mengkun, Yang Mingpp. 1966-1973Boundary condition coupling methods and its application to BOP-integrated transient simulation of SMART양종인, 이용재, 김태진, 최성수, 손홍현, 신도영pp. 1974-1987Effect of silica fume content in concrete blocks on laser-induced explosive spalling behavior오승용, 박현민, 임권, 남성모, 최병선, 김택수pp. 1988-1993
원문 보기