자력 승강식 크레인의 클램핑 패드 마찰계수에 미치는 설계변수 영향
Effects of Design Parameters on the Frictional Coefficient of Clamping Pads for Self-Climbing Crane systems
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A self-climbing crane (SCC) system is under development for the installation and maintenance of wind turbines. It can move vertically along the wind turbine tower by itself. One of the key components of the SCC system is the clamping pad to maintain a safe position on the wind turbine tower. The SCC system can maintain its position on the tower from the frictional force generated between the surfaces of the clamping pads and the tower. If the frictional force provided by the clamping pads are insufficient, the SCC system cannot stay in the vertical position on the tower. Therefore, the development of clamping pads with sufficient frictional force is very important for the SCC system. At the same time, the operation of the SCC system should not damage the paint coating of the wind turbine tower. In order to verify that the frictional force is sufficient and that frictional and compressive forces do not cause damage to the paint, a number of combined compression and shear loading tests were conducted using a test device prepared for this study. The details regarding the test specimens, test procedure, and test results are summarized in this paper.
Abstract
A self-climbing crane (SCC) system is under development for the installation and maintenance of wind turbines. It can move vertically along the wind turbine tower by itself. One of the key components of the SCC system is the clamping pad to maintain a safe position on the wind turbine tower. The SCC system can maintain its position on the tower from the frictional force generated between the surfaces of the clamping pads and the tower. If the frictional force provided by the clamping pads are insufficient, the SCC system cannot stay in the vertical position on the tower. Therefore, the development of clamping pads with sufficient frictional force is very important for the SCC system. At the same time, the operation of the SCC system should not damage the paint coating of the wind turbine tower. In order to verify that the frictional force is sufficient and that frictional and compressive forces do not cause damage to the paint, a number of combined compression and shear loading tests were conducted using a test device prepared for this study. The details regarding the test specimens, test procedure, and test results are summarized in this paper.
참고문헌 (15)
- "Available online :" (2021)[URL]
- "Liftra" (2023)[URL]
- "Mammoet"[URL]
- Jeong, H. S., "Structural Characteristic of Self Climbing Crane for Onshore Wind Turbine Installation", The Korean Society of Manufacturing Process Engineers Autumn Conference 2021, pp.115~ (2021)
- Park, J. S., "Establishing Operating Conditions and Assessing Structural Integrity for Self Climbing Crane for Wind Turbine Installation", The Korean Society of Manufacturing Process Engineers Spring Confernece, pp.326~ (2023)
- "DAFA" (2022)[URL]
- "UNISON" (2020)[URL]
- Korean Standards & Certification, "KS M ISO 19840, Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces", ~ (2012)
- Korean Standards & Certification, "KS M ISO 12944-6, Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods", ~ (2018)
- Korean Standards & Certification, "KS M ISO 4628-2, Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2:Assessment of degree of blistering", ~ (2016)
- Korean Standards & Certification, "KS M ISO 4628-3, Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 3: Designation of degree of rusting", ~ (2016)
- Korean Standards & Certification, "KS M ISO 4628-4, Paints and varnishes - Evaluation of degradation of paint coatings - Designation of intensity, quantity and size of common types of defect - Part 4: Designation of degree of cracking", ~ (2016)
- Korean Standards & Certification, "KS M ISO 4628-5, Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5:Assessment of degree of flaking", ~ (2016)
- Korean Standards & Certification, "KS M ISO 6270-1, Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure)", ~ (2017)
- Korean Standards & Certification, "KS M ISO 21227-3, Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part3: Evaluation of delamination and corrosion around a scribe", ~ (2007)