Experimental investigation of dynamic trim control devices in fast speed vessel
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
The displacement Deep-V catamaran concept was developed in Newcastle University(UNEW) through development of the systematic Deep-V catamaran series. One of the most important Deep-V catamaran launched to date is Newcastle University’s own multi-purpose research vessel, The Princess Royal. The vessel was launched in 2011 and enhanced the Deep-V catamaran concept further with the successful adoption of a novel anti-slamming bulbous bow and tunnel stern for improved efficiency. It was however identified that the vessel has substantial amount of dynamic trim that limited the visibility of the captain. The dynamic trim also increased the wave-making resistance thereby preventing the vessel from attaining its maximum speed in certain sea states. This paper therefore presents the application of devices such as Trim Tabs, Interceptors, Transom Wedges and Integrated Transom Wedges-Tabs to control the dynamic trim and improvement of fuel efficiency of the vessel. All of these energy saving devices were fitted into a model for tests in Newcastle University’s Towing Tank. Model test verification confirmed that the optimum appendage was the interceptors, they produced a 5 % power saving and 1.2 degree trim reduction at 15 knots, and investigations of full scale trials will be scheduled with and without application of device to compare the improvement of performance.
Abstract
The displacement Deep-V catamaran concept was developed in Newcastle University(UNEW) through development of the systematic Deep-V catamaran series. One of the most important Deep-V catamaran launched to date is Newcastle University’s own multi-purpose research vessel, The Princess Royal. The vessel was launched in 2011 and enhanced the Deep-V catamaran concept further with the successful adoption of a novel anti-slamming bulbous bow and tunnel stern for improved efficiency. It was however identified that the vessel has substantial amount of dynamic trim that limited the visibility of the captain. The dynamic trim also increased the wave-making resistance thereby preventing the vessel from attaining its maximum speed in certain sea states. This paper therefore presents the application of devices such as Trim Tabs, Interceptors, Transom Wedges and Integrated Transom Wedges-Tabs to control the dynamic trim and improvement of fuel efficiency of the vessel. All of these energy saving devices were fitted into a model for tests in Newcastle University’s Towing Tank. Model test verification confirmed that the optimum appendage was the interceptors, they produced a 5 % power saving and 1.2 degree trim reduction at 15 knots, and investigations of full scale trials will be scheduled with and without application of device to compare the improvement of performance.
참고문헌 (16)
- Atlar, M., "Recent Developments and the Emerging State of the Art in the High Speed Vessel World with a Personal View on Large Deep-V Hulls and their future Potential (Discussion)", 6th International Marine Design Conference, IMDC'97 (1997)
- Atlar, M., "Deep-Vee hullforms and their Application to multý-hulls, 'Deep-V' Catamaran", 1st European Symp. on Yacht and Small Craft Design (1998), University of Genova
- Atlar, M., "A Fast Catamaran Ferry using a Displacement Type Catamaran", 13th Congress of Intl. Maritime Assoc. of Mediterranean IMAM 2009 (2009)
- Atlar, M., "An Innovative Research Vessel Replacement for Newcastle University", Proceedings of Seventh International Conference on High Performance Marine Vehichles (2010)
- Cusanelli, D., "Integrated Wedge-Flap for Enhanced Powering Performance", Proceedings of 4th International Conference on Fast Sea Transportation, pp.751~765 (1997)
- Faltinsen, O. M., "Hydrodynamics of High Speed Crafts" (2005), Cambridge University Press
- 김옥석, "카타마란형 파워요트의 운동응답 특성에 관한 연구", 한국항해항만학회지, 34(6), pp.447~452 (2010), 한국항해항만학회
- Gopakumar, N., "Dynamic Trim Control of High Speed Craft", 석사, pp.2012
- Hadler, J. B., "The Prediction of Power Performance on Planing Craft", Transactions of Society of Naval Architects and Marine Engineers, 74, pp.563~610 (1966)
- ITTC, "ITTC Recommended Procedures and Guidelines; Testing and Extrapolation Methods of High Speed Crafts and Marine Vehichles", 7.5-02-05-01, 2011, 2008
- Karafiath G., "Effect of Stern Wedges on Ship Powering Performance", Engineers Journal, 99, pp.27~38 (1987)
- Interceptor characteristics with focus on lift and drag, "Lysdahl, L. A.", Norwegian University of Science and Technology, ~ (2005)
- Mantouvalos, A., "Development of first systematic deep V hull form series fordisplacement type high speed catamarans (DVC Series)", Proceedings of 10th International Conference on Fast Sea Transportation, pp.77~91 (2009)
- Park, M. K., "Hull Form Design and Consideration of Fast Catamaran", Journal of the Korean Institute of Navigation, 21(2), pp.41~46 (1997)
- Salas, M., "Hydrodynamic analysis of performance of stern flaps in a semi displacement hull", Latin American Applied Research, 34(4) (2004)
- Steen, S., "Experimental Investigation of Interceptor Performance", Proceedings of Ninth International Conference on Fast Sea Transportation, pp.237~245 (2007)