New evaluation of ship mooring with friction effects on mooring rope and cost-benefit estimation to improve port safety

키워드

참고문헌 (41)

1. "Independent Investigation into the Breakaway and Grounding of the Hong Kong Registered Bulk Carrier Creciente at Port Hedland, Western Australia on 12 September 2006" (2008)[URL]
2. Black, K., "Low-friction, low-abrasion fairlead liners", Proc. OCEANS 2012 IEEE, 2012, 1~11
3. Bossolini, E., "Thermal properties of Fiber ropes", Paper Presented at European Study Group with Industry (2016)
4. The Impulse Response Function and Ship Motions, "Cummins, W. E.", David Taylor Model Basin, ~, pp.Technical Report No. DTMB-1661 (1962)
5. Foster, G. P., "Advantages of fiber rope over wire rope", J. Ind. Textil, 32(1), pp.67~75 (2002)[DOI]
6. Gonzalez-Marco, D., "Implications of long waves in harbor management : the Gijon port case study", Ocean Coast Manag, 51, pp.180~201 (2008)[DOI]
7. Hashimoto, N., "Statistical forecasting of long period waves based on weather data for the purpose of judgment of executing cargo loading", Proc. 13th Int. Soc. Offshore Polar Eng. Conf., pp.697~704 (2003)
8. Hearle, J. W. S., "Modelling the longterm fatigue performance of fibre ropes", Proc. 3th Int. Soc. Offshore Polar Eng. Conf., pp.377~383 (1993)
9. Hobbs, R. E., "Bending fatigue in high-strength fibre ropes", Int. J. Fatig, 13(2), pp.174~180 (1991)[DOI]
10. Ikeda, H., "Development of mooring system to reduce long-period motions of a large ship", Proc. 21th Int. Soc. Offshore Polar Eng. Conf, pp.1214~1221 (2011)
11. John, F., "On the motion of floating bodies II", Commun. Pure Appl. Math, 3(1), pp.45~101 (1950)[DOI]
12. Karnoski, S. R., "Tension and bending fatigue test results of synthetic ropes", Proc. Annual Offshore Tech. Conf, pp.343~350 (1988)
13. Kwak, M., "Computer simulation of moored ship motion induced by harbor resonance in Pohang new harbor", Proc. 33rd Conf. Coast. Eng (2012)
14. Kubo, M., "Some considerations how to reduce the motions of ships moored at an open berth", J. Japan Inst. Nav, 87, pp.47~58 (1992)[DOI]
15. Kubo, M., "A study on time domain analysis of moored ship motion considering harbor oscillations", Proc. 9th Int. Soc. Offshore Polar Eng. Conf, pp.574~581 (1999)
16. Lopez, M., "Long wave effects on a vessel at berth", J. Appl. Ocean
    Res, 47, pp.63~72 (2014)[DOI]
17. McKenna, H. A., "Handbook of Fibre Rope Technology" (2004), Woodhead Publishing
18. "Technical Standards and Commentaries for Port and Harbour Facilities in Japan" (2009)[URL]
19. Nabijou, S., "Frictional performance of wire and fibre ropes bent over sheaves", J. Strain Anal. Eng, 30(1), pp.45~57 (1995)[DOI]
20. Ning, F., "Thermal failure mechanism of fiber ropes when bent over sheaves", Textil. Res. J, 89(7), pp.1215~1223 (2019)[DOI]
21. OCIMF(Oil Companies International Marine Forum), "Mooring Equipment Guidelines, fourth ed", Oil Companies International Marine Forum, ~ (2018)
22. Overington, M. S., "Modelling heat buildup in large polyester ropes", Int. J. Offshore Polar Eng, 7, pp.63~69 (1997)[DOI]
23. PIANC(World Association for Waterborne Transport Infrastructure), "Criteria for Movements of Moored Ships in Harbor : A Practical Guide", PIANC General Secretariat, ~ (1995)
24. Ridge, I. M. L., "Appraisal of ropes for LNG moorings", Proc. OIPEEC Conf. 5th Int. Stuttgart Rope Days (2015)
25. Sakakibara, S., "Initial attack of large-scaled Tsunami on ship motions and mooring loads", J. Ocean Eng, 36(2), pp.145~157 (2009)[DOI]
26. Sasa, K., "Basic research on frequency properties of long period waves at harbour facing to the Pacific Ocean", Proc. 11th Int. Soc. Offshore Polar Eng. Conf, pp.593~600 (2001)
27. Sasa, K., "Optimal routing of short-distance ferry from the evaluation of mooring criteria", Proc. Int. Conf. Offshore Mech. Arct. Eng. OMAE, 6, pp.1~8 (2017)
28. Sasa, K., "Current analysis of ship mooring and emergency safe system", J. Japan Soc. Civ. Eng. Ser. B2 (Coast. Eng.), 74(2), pp.1399~1404 (2018)[DOI]
29. ).,
30. Shiraishi, S., "Study on numerical simulation method to reproduce long-period ship motions", Proc. 9th Int. Soc. Offshore Polar Eng. Conf, pp.536~543 (1999)
31. Shiraishi, S., "Numerical simulation of ship motions moored to quay walls in long-period waves and proposal of allowable wave heights for cargo handling in a port", Proc. 19th Int. Soc. Offshore Polar Eng. Conf, pp.1109~1116 (2009)
32. Sloan, F., "Improving bend-over-sheave fatigue in fiber ropes", Proc. OCEANS 2003 IEEE, 2003, 1054~1057
33. Tti, Noble Denton, "Deepwater Fibre Moorings: an Engineers' Design Guide", ~ (1999)
34. Van der Molen, W., "Numerical simulation of
    long-period waves and ship motions in Tomakomai port", Japan. Coast Eng. J, 48(1), pp.59~79 (2006)[DOI]
35. Van der Molen, W., "Improvement of mooring configurations in Geraldton harbour", J. Mar. Sci. Eng, 4(3) (2015)[DOI]
36. Van Essen, S., "Evaluation of directional analysis methods for low-frequency waves to predict LNGC motion response in nearshore areas", Proc. Int. Conf. Offshore Mech. Arct. Eng. OMAE, 2013 (2013)
37. Villa-Caro, R., "A review of ship
    mooring systems", Brodogradnja, 69(1), pp.123~149 (2018)[DOI]
38. ),
39. ),
40. Yamamoto, K., "Basic Research on Preventing Breakage of Mooring Ropes", PhD, pp.2007
41. ),

관련 논문AI추천