국내산 저품위 실리카를 이용한 포름알데히드 제거용 다공성 촉매의 제조 및 특성
Preparation and Characterization of Porous Catalyst for Formaldehyde Removal using Domestic Low-grade Silica
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 촉매 Co-ZSM5 및 Cu-ZSM5 코팅이 적용된 저품위 실리카를 사용하여 다공성 지지체를 제조하여 포름 알데히드(HCHO) 제거를 수행하였다. 먼저, 지지체 원료는 실리카가 90 % 함유되어 있어 저급 실리카로 확인되었다. EDS 및 FT-IR 분석에 따르면 Co-ZSM5 및 Cu-ZSM5 촉매는 다공성 실리카 지지체의 표면에 성공적으로 코팅되었다. 제조 된 Co-ZSM5 및 Cu-ZSM5 코팅 된 비드를 사용하여 HCHO의 제거 테스트 결과, 반응 온도에 따라 Co-ZSM5 코팅 된 비드는 Cu-ZSM5 비드보다 높은 제거 효율 (> 97 %)을 나타났다. 200 ° C. 전자의 더 높은 효율은 우수한 표면 활성 특성 (BET 표면적 및 기공 부피)에서 기인 할 수 있으며, 아마도 유리한 HCHO 분해로 이어질 수 있다. 따라서 Co-ZSM5 비드는 국산 저급 실리카를 사용하여 제작 된 다공성 지지체를 사용하여 HCHO 제거 용 촉매에적합한 것으로 판단된다.
Abstract
This study investigated formaldehyde (HCHO) removal by preparing porous supports using domestic low-grade silica coated with Co-ZSM5 and Cu-ZSM5 as the catalysts. First, the sample of the raw material for the support contained 90% silica with quartz crystal phase, which was confirmed as low-grade silica. According to Energy-dispersive X-ray spectroscopy (EDS) and Fourier-transform infrared spectroscopy (FT-IR) analyses, the catalysts, Co-ZSM5 and Cu-ZSM5, were successfully coated on the surface of the porous silica supports. During the removal test of HCHO using the prepared Co-ZSM5 and Cu-ZSM5 coated beads, depending on the reaction temperature, the Co-ZSM5 coated beads exhibited higher removal efficiencies (>97%) than the Cu-ZSM5 beads at 200 °C. The higher efficiency of the Co-ZSM5 coating may be attributed to its superior surface activity properties (BET surface area and pore volume) that lead to the favorable HCHO decomposition. Therefore, Co-ZSM5 was determined to be the suitable catalyst for removing HCHO as a coating on a porous support fabricated using domestic low-grade silica.
참고문헌 (16)
- Utilization and materialization of domestic low grade silica minerals, "Choi, S.", Ministry of Knowledge Economy, ~ (2009)
- 한요셉, "V₂O5-TiO₂촉매 담지된 세라믹 폼 필터를 이용한 NOx 제거 특성", 한국대기환경학회지, 20(6), pp.773~781 (2004), 한국대기환경학회
- 2019, "2020 mineral commodity supply and demand", Kim, Y., 2020
- Ishizaki, K., "Porous Materials : Process Technology and Applications", pp.1~11 (1998), Kluwer Academic Publishers
- 한요셉, "반암(맥반석)으로 제조한 다공성 펠렛의 Ag 담지 및 항균 메디아로서의 적용", 한국세라믹학회지, 46(1), pp.16~23 (2009), 한국세라믹학회
- 서준형, "鑛尾를 活用한 다공성 세라믹 비드 製造 및 觸媒 變換機로의 應用", 자원리싸이클링, 22(4), pp.38~45 (2013), 한국자원리싸이클링학회[DOI]
- Han, Y., "Characterization of stone powder sludge foams and their application to wastewater treatment: Role of pore connectivity", Materials Chemistry and Physics, 134, pp.26~30 (2012)
- Liang, W., "Formaldehyde removal from gas streams by means of NaNO2 dielectric barrier discharge plasma", Journal of Hazardous Materials, 175, pp.1090~1095 (2010)
- Chen, H., "Removal of volatile organic compounds by single-stage and two-stage plasma catalysis systems: a review of the performance enhancement mechanisms, current status, and suitable applications", Environmental Science and Technology, 43(7), pp.2216~2227 (2009)
- Harling, A., "Temperature dependence of plasma-catalysis using a nonthermal, atmospheric pressure packed bed; the destruction of benzene and toluene", The Journal of Physical Chemistry C, 111(13), pp.5090~5095 (2007)
- Tanada, S., "Removal of formaldehyde by activated carbons containing amino groups", Journal of Colloid Interface Science, 214, pp.106~108 (1999)
- Zhang, C., "Perfect catalytic oxidation of formaldehyde over a Pt", TiO2 catalyst at room temperature, 2005, pp.6, 211~214
- Han, Y., "Controlling the pore size and connectivity of alumina-particle-stabilized foams using sodium dodecyl sulfate : Role of surfactant concentration", Langmuir, 36, pp.10331~10340 (2020)
- Han, Y., "Preparation of sizable and uniform-sized spherical ceramic foams : Drop-in-oil and agar gelation", Journal of the American Ceramic Society, 94, pp.2742~2745 (2011)
- Han, Y., "Control of pore and window size of ceramic foams with tri-modal pore structure : Influence of agar concentration", Materials Letters, 110, pp.253~259 (2013)
- Han, Y., "Influence of Ti doping level on hydrogen adsorption of mesoporous Ti-SBA-15 materials prepared by direct synthesis", International Journal of Hydrogen Energy, 37, pp.14240~14247 (2012)