싸이클론 전해환원방법을 이용한 LiBr 용액내의 Cu 불순물 제거에 관한 연구
Removal of Cu impurities in LiBr solution using cyclone electrowinning method
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The LiBr aqueous solution, which is the absorption liquid of absorption refrigerator, must be replaced periodically because the concentration of impurities such as Cu2+, Fe2+, Ca2+, etc., increases due to corrosion of the tubes as the period of use increases, and the refrigeration efficiency decreases significantly. In order to reuse the waste absorption liquid, flocculation-precipitation method is mainly applied to precipitate the impurities, which requires hundreds of times the concentration of impurities and generates additional waste. In this study, a process for removing Cu ion impurities from cyclone electrolyzer by electrolytic reduction is presented in a small-scale facility without additional waste. It was confirmed that Cu ion impurities can be removed down to 1 ppm by electrolytic reduction process, and to further improve the removal rate, the mass transfer rate was increased by using a cyclone electrolyzer. The removal rate of Cu ions increased with the increase of flow rate and current density, and it was confirmed that Cu was removed at a rate of 1.48 ppm/h under the condition of 330 mL/sec and 2.5 mA/cm2.
Abstract
The LiBr aqueous solution, which is the absorption liquid of absorption refrigerator, must be replaced periodically because the concentration of impurities such as Cu2+, Fe2+, Ca2+, etc., increases due to corrosion of the tubes as the period of use increases, and the refrigeration efficiency decreases significantly. In order to reuse the waste absorption liquid, flocculation-precipitation method is mainly applied to precipitate the impurities, which requires hundreds of times the concentration of impurities and generates additional waste. In this study, a process for removing Cu ion impurities from cyclone electrolyzer by electrolytic reduction is presented in a small-scale facility without additional waste. It was confirmed that Cu ion impurities can be removed down to 1 ppm by electrolytic reduction process, and to further improve the removal rate, the mass transfer rate was increased by using a cyclone electrolyzer. The removal rate of Cu ions increased with the increase of flow rate and current density, and it was confirmed that Cu was removed at a rate of 1.48 ppm/h under the condition of 330 mL/sec and 2.5 mA/cm2.
참고문헌 (7)
- R. Nikbakhti, "Absorption cooling systems–Review of various techniques for energy performance enhancement", Alexandria Engineering Journal, 59, pp.707~738 (2020)
- X. Wang, "Waste heat recycling absorption refrigeration circulation system", Journal of Physics : Conference Series, 2520, pp.12~40 (2023)
- A. A. Lima, "Absorption refrigeration systems based on ammonia as refrigerant using different absorbents : review and applications", Energies, 14, pp.48~ (2020)
- Y.H. Jo, "Absorption Chiller" (2002), Korea Institute of Science and Technology Information
- W. S. Yang, "Absorbent(LiBr) filtration purification system", Journal of the KARSE, 18, pp.103~111 (2001)
- Technology development of recycling process for Lithium Bromide absorption Liquid, "T.U. Kang", Air Conditioning Technology Co., Ltd., ~ (2006)
- S. Charazińska, "The efficiency of removing heavy metal ions from industrial electropolishing wastewater using natural materials", Scientific Reports, 12, pp.17766~ (2022)