IT와 BT 융복합 제품에 적용 가능한 무연압전세라믹소재의 특성 개선에 관한 연구
A Study on Improving the Characteristics of Lead-free Piezoelectric Ceramic Materials Applicable to IT and BT Converged Products
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, an attempt was made to approximate the main characteristic values of Bi0.5(Na0.78K0.22)0.5TiO3 (= BNKT) depending on the content of Fe2O3 additives, aiming to approach the values of lead(Pb) piezoelectric ceramic materials (PZT). Specifically, when the piezoelectric coefficient (d33) value of lead(Pb) piezoelectric ceramic material (PZT polycrystalline ceramic powder) is 300[pC/N] or higher, it is applied for hard purposes such as ultrasonic welding machines and cleaning machines, and when it exceeds 330[pC/N], it is applied for soft purposes like piezoelectric sensors. In this study, research and development were conducted for devices with a piezoelectric coefficient (d33) of 300[pC/N] or more for actuators. For this purpose, K+ exceeding0.02 to 0.12 mol% was added to (Na0.78K0.22)0.5Bi0.5TiO3 to analyze structural changes due to K+ excess, and (Na0.78K0.22)0.5Bi0.5TiO3+ 8mol% K2CO3 Ti4+ was substituted with Fe3+ to manufacture lead-free piezoelectric materials. As a result, ceramics with Fe3+substitution at x = 0.0075 yielded an average value of d33 = 315[pC/N]. Furthermore, for ceramics with Fe3+ substitution at x = 0.0075, the average values of maximum polarization (Pmax), residual polarization (Prem), and coercive field (Ec) were found to be 39.63 μC/cm2, 30.45 μC/cm2, and 2.50 kV/mm, respectively. The reliable characteristic values obtained from the research results can be applied to linear actuator components (such as the zoom function of mobile cameras, LDM for skin care, etc.) and ultrasonic vibration components.
Abstract
In this study, an attempt was made to approximate the main characteristic values of Bi0.5(Na0.78K0.22)0.5TiO3 (= BNKT) depending on the content of Fe2O3 additives, aiming to approach the values of lead(Pb) piezoelectric ceramic materials (PZT). Specifically, when the piezoelectric coefficient (d33) value of lead(Pb) piezoelectric ceramic material (PZT polycrystalline ceramic powder) is 300[pC/N] or higher, it is applied for hard purposes such as ultrasonic welding machines and cleaning machines, and when it exceeds 330[pC/N], it is applied for soft purposes like piezoelectric sensors. In this study, research and development were conducted for devices with a piezoelectric coefficient (d33) of 300[pC/N] or more for actuators. For this purpose, K+ exceeding0.02 to 0.12 mol% was added to (Na0.78K0.22)0.5Bi0.5TiO3 to analyze structural changes due to K+ excess, and (Na0.78K0.22)0.5Bi0.5TiO3+ 8mol% K2CO3 Ti4+ was substituted with Fe3+ to manufacture lead-free piezoelectric materials. As a result, ceramics with Fe3+substitution at x = 0.0075 yielded an average value of d33 = 315[pC/N]. Furthermore, for ceramics with Fe3+ substitution at x = 0.0075, the average values of maximum polarization (Pmax), residual polarization (Prem), and coercive field (Ec) were found to be 39.63 μC/cm2, 30.45 μC/cm2, and 2.50 kV/mm, respectively. The reliable characteristic values obtained from the research results can be applied to linear actuator components (such as the zoom function of mobile cameras, LDM for skin care, etc.) and ultrasonic vibration components.
참고문헌 (12)
- Cho, M. S., "On the Compensation of Camera Hand Shaking Using Friction Driven Piezoelectric Actuator", Journal of Aerospace System Engineering, 9(4), pp.23~30 (2015)
- 허대준, "입자 크기 제어에 의한 Bi계 무연압전 세라믹 복합소재의 전계유기 변형 특성 개선", 석사, 첨단소재공학부, pp.2014
- Jeong, S.Y., "A study on the analysis and application of piezoelectric properties of 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 ceramic for transformer", Master, pp.2023
- Ji, S. H., "Recent Research Trends of Flexible Piezoelectric Nanofibers for Energy Conversion Materials", Ceramist, 22(2), pp.122~132 (2019)
- Kim, M. C., "Development of Smart Sitting Mat using Pressure Sensor for Posture Correction", Proceedings of the 59th Winter Conference of the Korean Computer Information Conference, 27, pp.291~292 (2019)
- Rödel, J., "Lead-free piezoceramics : Status and perspectives", MRS Bulletin, 43, pp.576~580 (2018)
- Sakata, K., "Ferroelectric and Antiferroelectric Properties of(Na0. 5Bi0. 5)TiO3-SrTiO3 Solid Solution Ceramics", Ferroelectrics, 7, pp.347~349 (1974)
- Sasaki, A., "Dielectric and piezoelectric properties of (Bi0.5Na0.5)TiO3-(Bi0.5K0.5) TiO3 systems", Japanese Journal of Applied Physics, 38(9S), pp.5564~ (1999)
- Xu, R., "Dielectric enhancement of sol-gel derived BaTiO3", SrTiO3 multilayered thin films, 2002, pp.406(1-2), 113~117
- Yoon, J. G., "Charge Transfer at the Interfaces of Polycrystalline ZnO", Zn1-xMgxO, Journal of the Korean Physical Society, pp.2008, 53(4)[DOI]
- Yun, S. J., "Development of Bi0.5(Na0.78K0.22)0.5TiO3 Lead-free Piezoelectric Ceramic Material with Core-shell Structure for Biomedical", Journal of Society of Korea Industrial and Systems Engineering, 46(3), pp.15~22 (2023)
- Zhang, S. T., "Giant strain in lead-free piezoceramics Bi0. 5Na0. 5TiO3-BaTiO3-K0. 5Na0. 5NbO3system", Applied Physics Letters, 91(1) (2007)