휴대용 용존산소 측정 시스템의 설계 및 제작
Design and Fabrication of Portable Dissolved Oxygen Measurement System
1
조회
0
다운로드
0
인용
0
참고문헌
초록
스크린 프린트법으로 저가형 후막 용존산소 센서를 제작하고, 휴대용 용존산소 측정 시스템을 구현하였다. 전류 특성은 인가전압(바이어스 전압)을 0.7 V로 하였을 때, 응답시간도 짧고 전류 값의 변화도 가장 크다는 것을 알 수 있었다. 시스템의 구현은 MCU, 증폭단, 필터단, 전원부 및 디스플레이로 구성하였다. 용존산소 농도는 아날로그 값을 디지털로 변환하여 백분율로 표현되도록 프로그램하였다. 제작된 용존산소 측정 시스템은 표준 용액 대비 오차 ±0.5%의 정확도 및 약 100초의 응답시간을 나타내어 고가의 상용 용존산소 센서를 대치할 수 있을 것으로 기대된다.
Abstract
The dissolved oxygen (DO) sensors were fabricated by screen printing method, and potable dissolved oxygen measurement system was fabricated for low cost products. The fabricated sensors had high current change and fast response according to dissolved oxygen concentrations in the applied voltage of 0.7 V. The DO measurement system was consisted of MCU, amplifier, filter, power supply and display. DO concentrations were programed to display as digital percentages by converting the analog value. It is expected that the fabricated DO measurement system can replace the expensive commercial DO meter, because it reveals the high accuracy of ±0.5% to the standard solution and the response time of about 100 sec like the commercial DO meter.
참고문헌 (9)
- M. Prudenziati, "Thick-film sensors-an overview", Sensors and Actuators, 10, pp.65~82 (1986)
- L.Clark, "Monitor and Control of blood and tissue oxygen tension", Trans. American Society of Artificial Internal Organs, 2, pp.41~48 (1956)
- P. Fraher, "Fouling detection and compensation in Clark-type DOx sensors", IEEE Trans. on Ins. and Meas, 47(3), pp.686~691 (1998)
- H. Suzuki, "Miniture Clark type oxygen electrode with a three-electrode configuration", Sensors and Actuators B, 2, pp.297~302 (1990)
- Linek, V., "Measurement of Oxygen by membrane Covered Probes" (1988), Ellis Horwood Ltd,
- D. Mogan, "Noise and single to noise ratio in electrochemical detectors", Anal. Chem, 56, pp.2560~2567 (1984)
- H. Hinkers, "Amperometric microelectrode array in containment technology", Sensors Actuators B, 26(27), pp.398~400 (1995)
- P. Hartmman, "Response characteristics of luminescent oxygen sensors", Sens. Actuators B, 29, pp.251~257 (1995)
- R. Schuler, "Rapid polarographic in vivo oxygen catheter electrodes", Respir. Physics, 3, pp.90~110 (1967)