Numerical simulation of 2-D fluid-structure interaction with a tightly coupled solver and establishment of the mooring model
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, a newly enhanced Fluid-Structure Interaction (FSI) model which incorporates mooring lines was used to simulate a floating structure. The model has two parts: a Computational Fluid Dynamics (CFD) model and a mooring model. The open-source CFD OpenFOAM® v1712 toolbox was used in the present study, and the convergence criteria and relaxation method were added to the computational procedure used for the OpenFOAM multiphase flow solver, interDyMFoam. A newly enhanced, tightly coupled solver, CoupledinterDyMFoam, was used to decrease the artificial added mass effect, and the results were validated through a series of benchmark cases. The mooring model, based on the finite element method, was established in MATLAB® and was validated against a benchmark analytical elastic catenary solution and numerical results. Finally, a model which simulates a floating structure with mooring lines was successfully constructed by connecting the mooring model to CoupledinterDyMFoam.
Abstract
In this study, a newly enhanced Fluid-Structure Interaction (FSI) model which incorporates mooring lines was used to simulate a floating structure. The model has two parts: a Computational Fluid Dynamics (CFD) model and a mooring model. The open-source CFD OpenFOAM® v1712 toolbox was used in the present study, and the convergence criteria and relaxation method were added to the computational procedure used for the OpenFOAM multiphase flow solver, interDyMFoam. A newly enhanced, tightly coupled solver, CoupledinterDyMFoam, was used to decrease the artificial added mass effect, and the results were validated through a series of benchmark cases. The mooring model, based on the finite element method, was established in MATLAB® and was validated against a benchmark analytical elastic catenary solution and numerical results. Finally, a model which simulates a floating structure with mooring lines was successfully constructed by connecting the mooring model to CoupledinterDyMFoam.
참고문헌 (28)
- Chen, L., "Numerical study of roll motion of a 2-D floating structure in viscous flow", J. Hydrodyn, 28(4), pp.544~563 (2016)[DOI]
- Jeng Hei Chow, "Strongly coupled partitioned six degree-of-freedom rigid body motion solver with Aitken's dynamic under-relaxation", International Journal of Naval Architecture and Ocean Engineering, 8(4), pp.320~329 (2016), 대한조선학회
- Davidson, J., "Mathematical modelling of mooring systems for wave energy converters - a review", Energies, 10(5) (2017)[DOI]
- Devolder, B., "Review of the Implicit Motion Solver Algorithm in OpenFOAM® to Simulate a Heaving Buoy", 18th Numerical Towing Tank Symposium (2015)
- Dunbar, A. J., "Development and validation of a tightly coupled CFD", 6-DOF solver for simulating floating offshore wind turbine platforms, 2015, pp.110, 98~105
- F€orster, C., "Artificial added mass instabilities in sequential staggered coupling of nonlinear structures and incompressible viscous flows", Comput. Methods Appl. Mech. Eng, 196(7), pp.1278~1293 (2007)[DOI]
- Hou, G., "Numerical methods for fluid-structure interaction-a review", Commun. Comput. Phys, 12(2), pp.337~377 (2012)[DOI]
- Hsiao, Y., "Simulation of wave-current interaction with a sinusoidal bottom using OpenFOAM", Appl. Ocean Res, 94, pp.101998~ (2020)
- Study of the Transient Heave Oscillation of a Floating Cylinder, "Ito, S.", Massachusetts Institute of Technology, ~ (1977)
- Tae-Hwan Joung, "Shape optimization of an autonomous underwater vehicle with a ducted propeller using computational fluid dynamics analysis", International Journal of Naval Architecture and Ocean Engineering, 4(1), pp.44~56 (2012), 대한조선학회
- Jung, K. H., "Viscous effect on the roll motion of a rectangular structure", J. Eng. Mech, 132(2), pp.190~200 (2006)
- Kim, M., "Experimental and numerical estimation on roll damping and pressure on a 2-D rectangular structure in free roll decay test", Ocean Eng, 196, pp.106801~ (2020)
- 구원철, "Simplified formulas of heave added mass coefficients at high frequency for various two-dimensional bodies in a finite water depth", International Journal of Naval Architecture and Ocean Engineering, 7(1), pp.115~127 (2015), 대한조선학회
- Küttler, U., "Fixed-point fluid-structure interaction solvers with dynamic relaxation", Comput. Mech, 43(1), pp.61~72 (2008)[DOI]
- Lara, J. L., "Wave and current interaction with moored floating bodies using overset method", The 13th OpenFOAM Workshop (2018)
- Luongo, A., "Mathematical Models of Beams and Cables" (2013)
- Malta, E. B., "Damping coefficient analyses for floating offshore structures", Proceedings of the 29th International Conference on Offshore Mechanics and Arctic Engineering (2010)
- Mavrakos, S. A., "Deep water mooring dynamics", Mar. Struct, 9(2), pp.181~209 (1996)[DOI]
- Maza, M., "A coupled model of submerged vegetation under oscillatory flow using NaviereStokes equations", Coast. Eng, 80, pp.16~34 (2013)
- Newmark, N. M., "A method of computation for structural dynamics", J. Eng. Mech. Div, 85(3), pp.67~94 (1959)
- Niewiarowski, A., "Modeling underwater cable structures subject to breaking waves", Ocean Eng, 164, pp.199~211 (2018)[DOI]
- OpenCFD, "OpenFOAM: the Open Source CFD Toolbox: User Guide", ~ (2020)
- Pinguet, R., "Validation of open-source overset mesh method using free-decay tests of floating offshore wind turbine", The 30th International Ocean and Polar Engineering Conference. International Society of Offshore and Polar Engineers (2020)
- Pomeranz, S. B., "Aitken's D2 method extended", Cog. Math, 4(1) (2017)[DOI]
- Ransley, E. J., "Survivability of wave energy converters using CFD", Renew. Energy, 109, pp.235~247 (2017)[DOI]
- van Loon, R., "Comparison of various fluid-structure interaction methods for deformable bodies", Comput. Struct, 85(11-14), pp.833~843 (2007)[DOI]
- Wu, Y. T., "Propagation of solitary waves over a bottom-mounted barrier", Coast. Eng, 62, pp.31~47 (2012)
- Yvin, C., "Added mass evaluation with a finite-volume solver for applications in fluidestructure interaction problems solved with co-simulation", J. Fluid Struct, 81, pp.528~546 (2018)[DOI]