Choice of Efficient Sampling Rate for GNSS Signal Generation Simulators
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
A signal generation simulator is an economical and useful solution in Global Navigation Satellite System (GNSS) receiver design and testing. A software-defined radio approach is widely used both in receivers and simulators, and its flexible structure to adopt to new signals is ideally suited to the testing of a receiver and signal processing algorithm in the signal design phase of a new satellite-based navigation system before the deployment of satellites in space. The generation of highly accurate delayed sampled codes is essential for generating signals in the simulator, where its sampling rate should be chosen to satisfy constraints such as Nyquist criteria and integer and non-commensurate properties in order not to cause any distortion of original signals. A high sampling rate increases the accuracy of code delay, but decreases the computational efficiency as well, and vice versa. Therefore, the selected sampling rate should be as low as possible while maintaining a certain level of code delay accuracy. This paper presents the lower limits of the sampling rate for GNSS signal generation simulators. In the simulation, two distinct code generation methods depending on the sampling position are evaluated in terms of accuracy versus computational efficiency to show the lower limit of the sampling rate for several GNSS signals.
Abstract
A signal generation simulator is an economical and useful solution in Global Navigation Satellite System (GNSS) receiver design and testing. A software-defined radio approach is widely used both in receivers and simulators, and its flexible structure to adopt to new signals is ideally suited to the testing of a receiver and signal processing algorithm in the signal design phase of a new satellite-based navigation system before the deployment of satellites in space. The generation of highly accurate delayed sampled codes is essential for generating signals in the simulator, where its sampling rate should be chosen to satisfy constraints such as Nyquist criteria and integer and non-commensurate properties in order not to cause any distortion of original signals. A high sampling rate increases the accuracy of code delay, but decreases the computational efficiency as well, and vice versa. Therefore, the selected sampling rate should be as low as possible while maintaining a certain level of code delay accuracy. This paper presents the lower limits of the sampling rate for GNSS signal generation simulators. In the simulation, two distinct code generation methods depending on the sampling position are evaluated in terms of accuracy versus computational efficiency to show the lower limit of the sampling rate for several GNSS signals.
참고문헌 (20)
- DENNIS M. AKOS, "Effect of Sampling Frequency on GNSS Receiver Performance", Navigation, 53(2), pp.85~95 (2006), Institute of Navigation[DOI]
- "BeiDou Navigation Satellite System Signal in Space Interface Control Document Open Service Signal B1C (Version 1.0)", BeiDou ICD, ~ (2017)
- "BeiDou Navigation Satellite System Signal in Space Interface Control Document Open Service Signal B2a (Version 1.0)", BeiDou ICD, ~ (2017)
- "BeiDou Navigation Satellite System Signal in Space Interface Control Document Open Service Signal B1I (Version 3.0)", BeiDou ICD, ~ (2019)
- Borre, K., "A software-defined GPS and Galileo receiver: a single-frequency approach" (2007), Springer Science & Business Media
- "European GNSS(Galileo) Open Service Signal-in-Space Interface Control Document Issue 2.0", Galileo ICD, ~ (2021)
- "Indian Regional Navigation Satelltite System Signal in Space ICD for Standard Positioning Service Version 1.1", IRNSS ICD, ~ (2017)
- "Navstar GPS Space Segment", Navigation User Segment Interfaces, 2022
- "Navstar GPS Space Segment", User Segment L5 Interfaces, 2022
- "Navstar GPS Space Segment", User Segment L1C Interfaces, Revision J, 2022
- Julien, O., "A Complete Software-Based IF GNSS Signal Generator for Software Receiver Development", Proceedings of the 17th International Technical Meeting of the Satellite Division of The Institute of Navigation (ION GNSS 2004), pp.2146~2157 (2004)
- GNSS: Principles and Applications, "Understanding GPS", pp.2017, Kaplan, E. D.
- "Satellite Navigation System More Accurately" (2021)[URL]
- Lim, S., "Design of a software-based multi-channel GNSS IF signal generator", 2008 International Conference on Control, Automation and Systems, pp.754~758 (2008)
- 송영진, "Design of Multi-Constellation and Multi-Frequency GNSS SDR with Fully Reconfigurable Functionality", Journal of Positioning, Navigation, and Timing, 10(2), pp.91~102 (2021), 사단법인 항법시스템학회[DOI]
- Thomas, J. B., "Functional description of signal processing in the Rogue GPS receiver", NASA Jet Propulsion Lab, ~ (1988)
- Tran, V., "Generalised Theory on the Effects of Sampling Frequency on GNSS Code Tracking", The Journal of Navigation, 71, pp.257~280 (2018)[DOI]
- Tsui, J. B. Y., "Fundamentals of global positioning system receivers: a software approach" (2005), John Wiley & Sons, Inc
- Won, J. -H., "Design and Test Results of Software Based IF Level GPS Signal Simulator", Proceedings of the 17th International Technical Meeting of the Satellite Division of The Institute of Navigation (ION GNSS 2004), pp.305~315 (2004)
- Yin, X., "Design and Implementation of a Flexible Software-based GNSS IF Signal Simulator", Proceedings of the 22nd International Technical Meeting of the Satellite Division of The Institute of Navigation (ION GNSS 2009), pp.2229~2240 (2009)