Al7075를 이용한 GTAW공정의 용가재에 따른 용접 건전성 평가
A Evaluation of Welding Integrity according to the Filler Metal by GTAW Process using Al7075
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
This study evaluated the mechanical joining characteristics of substrate Al7075 using the filler metals of ER5356 and Al7075 to secure the joining integrity of the specimens by GTAW. The results of radiographic test show that the welded specimens meet the first level standard of KS D 2042. Besides, welding defects were not occurred. The tensile strengths of the specimens using the filler metals of Al7075 and ER5356 had 240MPa and 252MPa, respectively. The yield strengths were 132MPa and 120MPa, respectively. In case of using the filler metal of Al7075, However, in case of using the filler metal of ER5356, Two filler metals of Al7075 and ER5356 were similar to each other in tensile and yield strength.
Abstract
This study evaluated the mechanical joining characteristics of substrate Al7075 using the filler metals of ER5356 and Al7075 to secure the joining integrity of the specimens by GTAW. The results of radiographic test show that the welded specimens meet the first level standard of KS D 2042. Besides, welding defects were not occurred. The tensile strengths of the specimens using the filler metals of Al7075 and ER5356 had 240MPa and 252MPa, respectively. The yield strengths were 132MPa and 120MPa, respectively. In case of using the filler metal of Al7075, However, in case of using the filler metal of ER5356, Two filler metals of Al7075 and ER5356 were similar to each other in tensile and yield strength.
참고문헌 (6)
- 이규홍, "주조 A356 알루미늄 합금의 기계적 성질과 파괴인성에 미치는 공정 Si 입자의 영향", 대한금속·재료학회지, 45(1), pp.18~29 (2007), 대한금속·재료학회
- 김선호, "주조용 A356 합금의 인장 및 고주기 피로 특성에 미치는 열처리 영향", 대한금속·재료학회지, 53(2), pp.96~103 (2015), 대한금속·재료학회[DOI]
- H. Hayashi, "Recent trends in sheet metals and their formability in manufacturing automotive panels", J. of Materials Processing Technology, 46, pp.455~ (1994)
- 고등, "접착제로 접착된 알루미늄 폼의 압축에 대한 유한요소해석", 한국기계기술학회지, 16(6), pp.2105~2110 (2014), 한국기계기술학회
- 김지선, "파이버 레이저를 이용한 알루미늄 합금과 고강도강판의 이종용접에 관한 연구", 한국기계기술학회지, 16(4), pp.1659~1664 (2014), 한국기계기술학회[DOI]
- R. W. Richardson, "Coaxial weld pool viewing for process monitoring and control", Welding Journal, 63(3), pp.43~50 (1984)