기상측정 및 CAM 자동화를 통한 금형 제작 공정 개선
Improvement of machining process for mold parts using on-machine measuring system and CAM automation
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In the CNC machining process, problems such as lowering of machine operation rate, setting errors, and machining precision occur due to the increase in setting time and preparation time. These machining errors cause delays in delivery and increase in cost due to an increase in the number of mounting and dismounting of the workpiece, an increase in measurement and reprocessing time, and an increase in the finishing time in the assembly process. Therefore, in this study, by automating the setting of the work piece using OMV (On Machine Verification), which is a meteorological measurement system, the preparation time for machining the work piece and the setting accuracy were improved, the rework rate was reduced, and the mold manufacturing process was shortened. Through the advancement, standardzation, and automation of the mold part manufacturing process, we have improved productivity by minimizing low-value-added repetitive tasks. In addition, the measurement time was reduced by more than 50% and the machining measurement rate was improved by more than 20%, eliminating repetitive work for correcting machining defects, and reducing the work preparation time by more than 15% through automatic setting.
Abstract
In the CNC machining process, problems such as lowering of machine operation rate, setting errors, and machining precision occur due to the increase in setting time and preparation time. These machining errors cause delays in delivery and increase in cost due to an increase in the number of mounting and dismounting of the workpiece, an increase in measurement and reprocessing time, and an increase in the finishing time in the assembly process. Therefore, in this study, by automating the setting of the work piece using OMV (On Machine Verification), which is a meteorological measurement system, the preparation time for machining the work piece and the setting accuracy were improved, the rework rate was reduced, and the mold manufacturing process was shortened. Through the advancement, standardzation, and automation of the mold part manufacturing process, we have improved productivity by minimizing low-value-added repetitive tasks. In addition, the measurement time was reduced by more than 50% and the machining measurement rate was improved by more than 20%, eliminating repetitive work for correcting machining defects, and reducing the work preparation time by more than 15% through automatic setting.
참고문헌 (7)
- J. V. Owen, "CMMs on the shop floor", Manufacturing Engineering, April, 66~70 (1991)
- S. J. Lee, "In the OMM system, Measurement error analysis", Journal of the Korean Society of Precision Engineering, 15(5), pp.34~42 (1998)
- K. D. Kim, "Design and Analysis of a Two-Dimensional On-the-Machine Measurement and Inspection System Using a Contact Measuring Probe", Proceedings of the Korean Society of Mechanical Engineers, 23(1), pp.37~46 (1999)
- W .S .Nam, "System Design for On-the-Machine Measurement and Inspection of Freeform Surfaces", Journal of the Korean Society of Precision Engineers, 15(12), pp.81~88 (1998)
- S. W. Lee, "Meteorological Measurement System Development", Industrial Engineering, 11(11), pp.199~205 (1998)
- W. S. Nam, "A Study on the High-Speed and High-Precision Freeform Surface Measurement and Inspection System on the Machine", Journal of the Korean Society of Mechanical Engineers, 22(12), pp.2114~2125 (1998)
- H. C. Kim, "A Study on Machine Tool Application Test Using Meteorological 3D Measurement Technology", Proceedings of the 2000 Spring Conference of the Korean Society of Machine Tools, pp.653~658 (2000)