Experimental study of turbulent flow in a scaled RPV model by PIV technology
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The turbulent flow in reactor pressure vessel (RPV) of pressurized water reactor (PWR) is important for the flow rate distribution at core inlet. Thus, it is vital to study the turbulent flow phenomena in RPV. However, the complicated fluid channel consisted of inner structures of RPV will block or refract the laser sheet of particle image velocimetry (PIV). In this work, the matched index of refraction (MIR) of sodium iodide (NaI) solution and acrylic was applied to support optical path for flow field measurements by PIV in the 1/10th scaled-down RPV model. The experimental results show detailed velocity field at different locations inside the scaled-down RPV model. Some interesting phenomena are obtained, including the non-negligible counterflow at the corner of nozzle edge, the high downward flowing stream in downcomer, large vortices above vortex suppression plate in lower plenum. And the intensity of counterflow and the strength of vortices increase as inlet flow rate increasing. Finally, the case of asymmetry flow was also studied. The turbulent flow has different pattern compared with the case of symmetrical inlet flow rate, which may affect the uniformity of flow distribution at the core inlet
Abstract
The turbulent flow in reactor pressure vessel (RPV) of pressurized water reactor (PWR) is important for the flow rate distribution at core inlet. Thus, it is vital to study the turbulent flow phenomena in RPV. However, the complicated fluid channel consisted of inner structures of RPV will block or refract the laser sheet of particle image velocimetry (PIV). In this work, the matched index of refraction (MIR) of sodium iodide (NaI) solution and acrylic was applied to support optical path for flow field measurements by PIV in the 1/10th scaled-down RPV model. The experimental results show detailed velocity field at different locations inside the scaled-down RPV model. Some interesting phenomena are obtained, including the non-negligible counterflow at the corner of nozzle edge, the high downward flowing stream in downcomer, large vortices above vortex suppression plate in lower plenum. And the intensity of counterflow and the strength of vortices increase as inlet flow rate increasing. Finally, the case of asymmetry flow was also studied. The turbulent flow has different pattern compared with the case of symmetrical inlet flow rate, which may affect the uniformity of flow distribution at the core inlet
참고문헌 (16)
- M. J. Palamara, "Development of an advanced PWR reactor internals system finite element model for flow-induced vibration analysis", Proceedings of the ASME 2015 Pressure Vessels and Piping Conference (2015), ASME
- T. Nguyen, "Stereoscopic particle image velocimetry measurements of flow in a rod bundle with a spacer grid and mixing vanes at a low Reynolds number", Int. J. Heat Fluid Flow, 67, pp.202~219 (2017)
- W. Qu, "Experimental study of cross flow and lateral pressure drop in a 5x5 rod bundle with mixing vane spacer grid", Nucl. Eng. Des, 353 (2019)
- W. Qu, "Experimental study of pressure Loss in a 5 ×5–rod bundle with the mixing vane spacer grid", Front. Energy Res, 9 (2021)
- W. Qu, "Experimental study of coherent structures downstream mixing vaned spacer grid of different inclination angles in a 5 × 5 rod bundle by TR-PIV", Ann. Nucl. Energy, 181 (2023)
- S. Im, "PIV measurements of the flow patterns in a CANDU-6 model", Ann. Nucl. Energy, 98, pp.1~11 (2016)
- A. Alwafi, "Time-resolved particle image velocimetry measurements of a single impinging jet in the upper plenum of a scaled facility of high temperature gas-cooled reactors", Int. J. Heat Fluid Flow, 76, pp.113~129 (2019)
- D. Orea, "Experimental measurements of flow mixing in cold leg of a pressurized water reactor", Ann. Nucl. Energy, 140 (2020)
- O. Uzol, "Unobstructed particle image velocimetry measurements within an axial turbo-pump using liquid and blades with matched refractive indices", Exp. Fluid, 33, pp.909~919 (2002)
- Y. Fournier, "Evaluation of fluid flow in the lower core of a PWR with Code_Saturne", Nucl. Eng. Des, 237, pp.1729~1744 (2007)
- U. Bieder, "Qualification of the CFD code Trio_U for full scale reactor applications", Nucl. Eng. Des, 238, pp.671~679 (2008)
- T. Hohne, "Modeling of a buoyancy-driven flow experiment at the ROCOM test facility using the CFD codes CFX-5 and Trio_U", Nucl. Eng. Des, 236, pp.1309~1325 (2006)
- P. Martinez, "CFD modeling of the EPR primary circuit", Nucl. Eng. Des, 278, pp.529~541 (2014)
- M. Wang, "CFD simulation on the flow characteristics in the PWR lower plenum with different internal structures", Nucl. Eng. Des., 364 (2020)
- R. Liu, "Analysis for crack growth regularities in the nozzle-cylinder intersection area of Reactor Pressure Vessel", Ann. Nucl. Energy, 112, pp.779~793 (2018)
- L. Wang, "Numerical simulation of temperature heterogeneity inside the AP1000 upper plenum and hot leg", Nucl. Eng. Des., 362 (2020)