전계 시뮬레이션을 이용한 에폭시 복합체의 절연특성에 대한 연구
A Study on the Insulation Characteristics of Epoxy Composites Using Electric Field Simulation
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
본 논문에서는 전기 전자부품 및 기구의 절연재료로 널리 적용되고 있는 에폭시 복합재료의 절연 특성 및 신뢰도를 파악하고자 한다. 이를 위해 경제적, 기계적 요인에 의해 필수적으로 첨가되어야 하는 충진재의 분포에 따른 전계 변화를 예측하기 위하여 전계해석 시뮬레이터를 이용하여그 결과를 확인하였다. 또한 직류 전압 인가 조건하에서 주변 온도 변화 및 충진재 분포에 따른절연파괴시험을 수행하였고 그 변화를 관찰하였다. 시편은 에폭시 수지에 충진재를 0, 50, 100[phr] 첨가하여 3종류가 제작되었으며 모든 시편의 경우에서 온도가 증가함에 따라 절연파괴강도가 저하됨을 확인하였다. 시뮬레이션 결과 및 실제 절연강도시험 결과를 비교 고찰하여 전기 기구의절연설계에 필요한 기술적 적용 가능성을 확인하였다.
Abstract
In this paper, we aimed to identify the insulation characteristics and reliability of Epoxy composites, which are widely used as insulation material for electrical & electronic components and electric appliance. To this end, it was necessary to predict variations of electric field due to the distribution of fillers that must be added by economic and mechanical factors. So, we verified the result using an electric field analysis Simulator. Furthermore, under the condtion of DC voltage application, an dielectirc breakdown test was performed according to ambient temperature changes and the distribution of fillers, and the changes were observed. Three types of specimens were manufactured by adding 0, 50 and 100[phr] filling to Epoxy resin. In all specimens, as temperature was increased, the strength of the dielectric strength was decreased. When comparing the simulation results with the actual dielectric breakdown test results, we was able to confirm the technical applicability required for Insulation design of electric appliance.
참고문헌 (20)
- Povilas Bertasius, "Dielectric Properties of Epoxy-Matrix Composites with Tungsten Disulfide Nanotubes", Journal of Nanomaterials, 2019, pp.1155~ (2019)[DOI]
- T. Candra, "Advanced Composites", pp.771~941 (1993), A publication of the minerals, & metals society
- Dongxian Zhuo, "Flame retardancy effects of graphene nanoplatelet", carbon nanotube hybrid membranes on carbon fiber reinforced epoxy composites, 2013, pp.2013, ~
- B. Ellis, "Chemistry and Technology of Epoxy resins", pp.29~35 (1993), Blackie Academic & Professional
- Kim Sung Tae, "Development Trend for Thermoplastic Polymer Composite", Polymer Science and Technology, 24, pp.25~29 (2013)
- Sakshi Singh, "Breakdown Strength Estimation of Non-Cellulosic Insulating Materials Used in Electrical Power Equipment", Transactions on Electrical and Electronic Materials, 18(6), pp.338~340 (2017), 한국전기전자재료학회[DOI]
- M. Schwartz, "Encyclopedia of Materials, Parts and Finishes", pp.190~ (2002), CRC Press
- R. Arora, "High Voltage Insulation Engineering:Behavior of Dielectrics; Their Properties and Applications", pp.236~ (2008), New Age International Ltd
- D. J. Lee, "A Study on the Variations of Mechanical and Electrical Property of Epoxy Composites due to Boiling Absorption", Journal of KIIEE, 14(1), pp.53~58 (1997)
- Richard A. Pethrick, "Dielectric, Mechanical and Structural and Water Absorption Properties of a Thermo-plastic Modified Epoxy Resin", Macromolecules, 29, pp.5208~5214 (1996)
- 박재준, "Long-term and Short-term AC Treeing Breakdown of Epoxy", Micro-Silica, Transactions on Electrical and Electronic Materials, pp.2012, 13(5)[DOI]
- 박재준, "Electrical Insulation Breakdown Strength in Epoxy", Spherical Alumina Composites for HV Insulation, 2013, pp.14(2), 105~109[DOI]
- J. H. Kim, "A Study on the AC Dielectric Breakdown Characteristics and Mechanical Characteristics of Interpenetrating Polymer Network Epoxy Composites", Trans. of KIEEME, 9(7), pp.702~707 (1996)
- L. A. Dissado, "Electrical Degradation and Breakdown in Polymers", pp.242~316 (1992), Redwood Press
- Kouichi Tanaka, "A molecular dynamics study on thermal conductivity of thin epoxy polymer sandwiched between alumina fillers in heat-dissipation composite material", International journal of heat and mass transfer, 89, pp.714~723 (2015)
- Yunmin Liang, "Effects and mechanism of filler surface coating strategy on thermal conductivity of composites : A case study on epoxy", SiO2-coated BN composites, 2021, pp.164, ~
- Ya-Fei Zhang, "Vertically aligned graphene film", epoxy composites as heat dissipating materials, 2018, pp.118, 510~517[DOI]
- J. K. Sung, "Optimum Insulation Design of 500 ㎸ HVDC Polymer Insulator Based on DC Electric Field Simulation Techniques", pp.2015
- H. S. Jung, "Analysis of Electric Fiele for Mold Transformer using Finite Element Method", pp.2009
- In-Bum Jeong,, "Electrical Insulation Properties of Nanocomposites with SiO2 and MgO Filler", Transactions on Electrical and Electronic Materials, 11(6), pp.261~265 (2010), 한국전기전자재료학회