공기구동 이젝터의 노즐 형상과 위치 변화에 따른 성능 특성
Performance Characteristics of Air Driven Ejector According to the Position Changes and the Shape of Driving Nozzle
0
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
The aim of this research is to analyze the influence of motive pressure, driving nozzle position and nozzle throat ratio on the performance of ejector. The experiment was conducted in the variation of motive pressure of 0.196, 0.294, 0.392 and 0.490MPa respectively. The position of driving nozzle was varied in difference locations according to mixing tube diameter(0.5d, 1d, 2d, 3d, 4.15d, 5d and 6d). The experimental results show when the nozzle outlet is located at 3d, the flow characteristics change abruptly. It is shown that the suction flow rate and pressure lift ratio of ejector is influenced by the driving nozzle position. At nozzle position location of the 1d of mixing tube diameter the performance of ejector gives the best performance.
Abstract
The aim of this research is to analyze the influence of motive pressure, driving nozzle position and nozzle throat ratio on the performance of ejector. The experiment was conducted in the variation of motive pressure of 0.196, 0.294, 0.392 and 0.490MPa respectively. The position of driving nozzle was varied in difference locations according to mixing tube diameter(0.5d, 1d, 2d, 3d, 4.15d, 5d and 6d). The experimental results show when the nozzle outlet is located at 3d, the flow characteristics change abruptly. It is shown that the suction flow rate and pressure lift ratio of ejector is influenced by the driving nozzle position. At nozzle position location of the 1d of mixing tube diameter the performance of ejector gives the best performance.
참고문헌 (15)
- 홍영표, "공기구동 기체이젝터의 성능특성에 관한 연구", 한국마린엔지니어링학회, 18(1), pp.51~59 (1994)
- E. Rusly, "CFD analysis of ejector in a combined ejector cooling system", International Journal of Refrigeration, 28, pp.1092~1101 (2005)
- G. K. Alexis, "Estimation of ejector's main cross sections in steam-ejector refrigeration system", Applied Thermal Engineering, 24, pp.2657~2663 (2004)
- 문수범, "신형수이젝터 개발을 위한 실험연구", 한국마린엔지니어링학회지, 30(6), pp.677~684 (2006), 한국마린엔지니어링학회
- B. J. Huang, "Empirical correlation for ejector design", International Journal of Refrigeration, 22, pp.379~388 (1999)
- 김세훈, "이차목을 갖는 초음속 이젝터 작동압력에 대한 연구", 대한기계학회논문집 B, 29(8), pp.934~939 (2005), 대한기계학회
- 이준희, "가변형 음속", 초음속 이젝터 시스템에 관한 실험적 연구, 2005, pp.29(5), 554~560[DOI]
- Kanjanapon Chunnanond, "An experimental investigation of a steam ejector refrigerator: the analysis of the pressure profile along the ejector", Applied Thermal Engineering, 24, pp.311~322 (2004)
- 국립기술품질원, "한국산업규격, KS B 6017, “증기 분사 공기 이젝터 성능 시험 방법”, 1998", ~ (1998)
- T. Sriveerakul, "Performance prediction of steam ejector using computational fluid dynamics: Part 1. Validation of the CFD results", International Journal of Thermal Sciences, 46, pp.812~822 (2007)
- T. Sriveerakul, "Performance prediction of steam ejector using computational fluid dynamics: Part 2. Flow structure of a steam ejector influenced by operating pressures and geometries", International Journal of Thermal Sciences, 46, pp.823~833 (2007)
- 김진화, "이젝터를 사용한 혼합 시스템에서의 기-액 혼합특성에 관한 연구", 대한기계학회 2007년도 추계학술대회, pp.7~12 (2007)
- Keenan, J. H., "An Investigation of Ejector Design by Analysis and Experiment", Journal of Applied Mechanics, 17(3), pp.299~309 (1950)
- Kanjanapon Chounnanond, "Ejectors: applications in refrigeration technology", Renewable and Sustainable Energy Reviews, 8, pp.129~155 (2004)
- Chow, W. L., "Interaction between Primary and Secondary Streams of Supersonic Ejector System and Their Performance Characteristics", AIAA Journal, 2(4), pp.680~895 (1961)