Amount of Weight-Bearing During Tilt Table Inclination, With Neutral and Unilateral Knee Flexion Postures
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Objective To analyze the amount of weight-bearing during tilt table increments, with a review of neutral and unilateral knee flexion postures. Methods There were 17 healthy participants enrolled in this study. The subjects were tilted from 10° to 90°, and their body weight was measured at each 10° increment. In the first test, both plantar pressures, with the subjects in neutral posture, were recorded. During the second and third tests, the angle of inclination was thus recorded and increased, with the subjects in unilateral knee flexion posture; flexion was maintained at 25° by attaching a cylindrical support to the tilt table at the level of the popliteal fossa. Results The study was divided into two types of postures: neutral and unilateral knee flexion. The percentage of body weight (%BW) between each leg during neutral posture was noted as not being statistically significant. The %BW of one side during tilt table inclination was significantly different between the two postures at 10° to 80° (p<0.05). The weight during unilateral knee flexion posture was lower as analyzed, regardless of tilt table inclination compared with that in neutral posture. We note that fifty percent of the ratio of %BW was noted at 33.12° and 38.76° in neutral and flexion postures, respectively. Conclusion The unilateral knee flexion could induce the effect of decreased body weight compared with nonflexion side. The results of this study will help in setting a safe and quantitative percentage of weight-bearing on the lower extremity during tilt training.
Abstract
Objective To analyze the amount of weight-bearing during tilt table increments, with a review of neutral and unilateral knee flexion postures. Methods There were 17 healthy participants enrolled in this study. The subjects were tilted from 10° to 90°, and their body weight was measured at each 10° increment. In the first test, both plantar pressures, with the subjects in neutral posture, were recorded. During the second and third tests, the angle of inclination was thus recorded and increased, with the subjects in unilateral knee flexion posture; flexion was maintained at 25° by attaching a cylindrical support to the tilt table at the level of the popliteal fossa. Results The study was divided into two types of postures: neutral and unilateral knee flexion. The percentage of body weight (%BW) between each leg during neutral posture was noted as not being statistically significant. The %BW of one side during tilt table inclination was significantly different between the two postures at 10° to 80° (p<0.05). The weight during unilateral knee flexion posture was lower as analyzed, regardless of tilt table inclination compared with that in neutral posture. We note that fifty percent of the ratio of %BW was noted at 33.12° and 38.76° in neutral and flexion postures, respectively. Conclusion The unilateral knee flexion could induce the effect of decreased body weight compared with nonflexion side. The results of this study will help in setting a safe and quantitative percentage of weight-bearing on the lower extremity during tilt training.
참고문헌 (17)
- Murphy DF, "Risk factors for lower extremity injury: a review of the literature", Br J Sports Med, 37, pp.13~29 (2003)[DOI]
- Kubiak EN, "Early weight bearing after lower extremity fractures in adults", J Am Acad Orthop Surg, 21, pp.727~738 (2013)
- Meadows TH, "Effect of weight-bearing on healing of cortical defects in the canine tibia", J Bone Joint Surg Am, 72, pp.1074~1080 (1990)[DOI]
- Han TR, "Rehabilitation medicine" (2014), Koonja
- O'Young B, "Physical medicine and rehabilitation secrets. 3rd ed", pp.2008, Mosby
- Hustedt JW, "Current advances in training orthopaedic patients to comply with partial weight-bearing instructions", Yale J Biol Med, 85, pp.119~125 (2012)
- Vasarhelyi A, "Partial weight bearing after surgery for fractures of the lower extremity: is it achievable?", Gait Posture, 23, pp.99~105 (2006)[DOI]
- Son SM, "Comparison of the plantar pressure distributions at different degrees of tilting: a preliminary report", J Phys Ther Sci, 26, pp.401~403 (2014)[DOI]
- Morgan CL, "Effects of knee joint angle and tilt table incline on force distribution at the feet and supporting straps", Clin Rehabil, 17, pp.871~878 (2003)[DOI]
- Sheldon MR, "Comparison of two methods for calculating percent body weight on a tilt table", J Orthop Sports Phys Ther, 19, pp.18~21 (1994)[DOI]
- Mavcic B, "Optimal mechanical environment of the healing bone fracture", osteotomy, 2012, pp.36, 689~695
- DiStasio AJ, "Protected early motion versus cast immobilization in postoperative management of ankle fractures", Contemp Orthop, 29, pp.273~277 (1994)
- van Lieshout R, "Biofeedback in partial weight bearing: usability of two different devices from a patient's and physical therapist's perspective", PLoS One, 11, pp.e0165199~ (2016)[DOI]
- Nambiar M, "AO Surgery Reference: a comprehensive guide for management of fractures", Br J Sports Med, 51, pp.545~546 (2017)[DOI]
- 육군창, "기립경사대 각도 증가에 따른 천골과 둔부 압력 변화", 대한물리치료학회지, 25(2), pp.71~75 (2013), 대한물리치료학회
- Kim JS, "Weight bearing study using digital scales in hemiplegic patients", J Korean Acad Rehabil Med, 24, pp.1055~1060 (2000)
- Foo J, "Low-cost evaluation and real-time feedback of static and dynamic weight bearing asymmetry in patients undergoing inpatient physiotherapy rehabilitation for neurological conditions", J Neuroeng Rehabil, 10, pp.74~ (2013)[DOI]