Post-Stenotic Recirculating Flow May Cause Hemodynamic Perforator Infarction
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Background and Purpose The primary mechanism underlying paramedian pontine infarction (PPI) is atheroma obliterating the perforators. Here, we encountered a patient with PPI in the post-stenotic area of basilar artery (BA) without a plaque, shown by high-resolution magnetic resonance imaging (HR-MRI). We performed an experiment using a 3D-printed BA model and a particle image velocimetry (PIV) to explore the hemodynamic property of the post-stenotic area and the mechanism of PPI. Methods 3D-model of a BA stenosis was reconstructed with silicone compound using a 3D-printer based on the source image of HR-MRI. Working fluid seeded with fluorescence particles was used and the velocity of those particles was measured horizontally and vertically. Furthermore, microtubules were inserted into the posterior aspect of the model to measure the flow rates of perforators (pre-and post-stenotic areas). The flow rates were compared between the microtubules. Results A recirculating flow was observed from the post-stenotic area in both directions forming a spiral shape. The velocity of the flow in these regions of recirculation was about one-tenth that of the flow in other regions. The location of recirculating flow well corresponded with the area with low-signal intensity at the time-of-flight magnetic resonance angiography and the location of PPI. Finally, the flow rate through the microtubule inserted into the post-stenotic area was significantly decreased comparing to others (P<0.001). Conclusions Perforator infarction may be caused by a hemodynamic mechanism altered by stenosis that induces a recirculation flow. 3D-printed modeling and PIV are helpful understanding the hemodynamics of intracranial stenosis.
Abstract
Background and Purpose The primary mechanism underlying paramedian pontine infarction (PPI) is atheroma obliterating the perforators. Here, we encountered a patient with PPI in the post-stenotic area of basilar artery (BA) without a plaque, shown by high-resolution magnetic resonance imaging (HR-MRI). We performed an experiment using a 3D-printed BA model and a particle image velocimetry (PIV) to explore the hemodynamic property of the post-stenotic area and the mechanism of PPI. Methods 3D-model of a BA stenosis was reconstructed with silicone compound using a 3D-printer based on the source image of HR-MRI. Working fluid seeded with fluorescence particles was used and the velocity of those particles was measured horizontally and vertically. Furthermore, microtubules were inserted into the posterior aspect of the model to measure the flow rates of perforators (pre-and post-stenotic areas). The flow rates were compared between the microtubules. Results A recirculating flow was observed from the post-stenotic area in both directions forming a spiral shape. The velocity of the flow in these regions of recirculation was about one-tenth that of the flow in other regions. The location of recirculating flow well corresponded with the area with low-signal intensity at the time-of-flight magnetic resonance angiography and the location of PPI. Finally, the flow rate through the microtubule inserted into the post-stenotic area was significantly decreased comparing to others (P<0.001). Conclusions Perforator infarction may be caused by a hemodynamic mechanism altered by stenosis that induces a recirculation flow. 3D-printed modeling and PIV are helpful understanding the hemodynamics of intracranial stenosis.
참고문헌 (18)
- Bassetti C, "Isolated infarcts of the pons", Neurology, 46, pp.165~175 (1996)
- Klein IF, "High-resolution MRI identifies basilar artery plaques in paramedian pontine infarct", Neurology, 64, pp.551~552 (2005)
- Mehdiratta M, "Basilar artery branch disease imaged by magnetic resonance imaging", Arch Neurol, 64, pp.1666~ (2007)
- Kim BJ, "Perforator infarction immediately distal to the stenosis of parental artery: is it hemodynamic?", J Stroke Cerebrovasc Dis, 23, pp.1991~1993 (2014)
- Choi JY, "Analysis of errors in medical rapid prototyping models", Int J Oral Maxillofac Surg, 31, pp.23~32 (2002)
- Ha H, "Fluid-dynamic optimal design of helical vascular graft for stenotic disturbed flow", PLoS One, 9, pp.e111047~ (2014)
- Wootton DM, "Fluid mechanics of vascular systems, diseases, and thrombosis", Annu Rev Biomed Eng, 1, pp.299~329 (1999)
- Zhao R, "Micro-flow visualization of red blood cell-enhanced platelet concentration at sudden expansion", Ann Biomed Eng, 36, pp.1130~1141 (2008)
- Jeong J, "On the identification of a vortex", J Fluid Mech, 285, pp.69~94 (1995)
- Dubief Y, "On coherent-vortex identification in turbulence", J Turbul, 1, pp.011~ (2000)
- Zhang JN, "Platelet aggregation and activation under complex patterns of shear stress", Thromb Haemost, 88, pp.817~821 (2002)
- Leng X, "Magnetic resonance angiography signal intensity as a marker of hemodynamic impairment in intracranial arterial stenosis", PLoS One, 8, pp.e80124~ (2013)
- Bo Norrving, "Evolving Concept of Small Vessel Disease through Advanced Brain Imaging", 대한뇌졸중학회지, 17(2), pp.94~100 (2015), 대한뇌졸중학회
- Kim BJ, "The shape of middle cerebral artery and plaque location : high-resolution MRI finding", Int J Stroke, 10, pp.856~860 (2015)
- Kwon HM, "Basilar artery dolichoectasia is associated with paramedian pontine infarction", Cerebrovasc Dis, 27, pp.114~118 (2009)
- Schwartz A, "Dolichoectatic intracranial arteries : review of selected aspects", Cerebrovasc Dis, 3, pp.273~279 (1993)
- Yagi T, "Experimental insights into flow impingement in cerebral aneurysm by stereoscopic particle image velocimetry : transition from a laminar regime", J R Soc Interface, 10, pp.20121031~ (2013)
- Goubergrits L, "In vitro study of near-wall flow in a cerebral aneurysm model with and without coils", AJNR Am J Neuroradiol, 31, pp.1521~1528 (2010)