Comparative investigation of activated porous carbons treated by silver electroplation from aqueous solution
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The electroplating of the Ag ions from aqueous solution on activated porous carbons was investigated over a wide range of plating time. The adsorption capacities of Ag metallic carbons were associated with their internal porosity and were related to physical properties such as surface area and pore size distribution. And, surface morphologies and quantitative analysis for the metal supported carbons are investigated by scanning electron microscopy (SEM) and energy disperse X-ray (EDX) measurements to explain the changes in adsorption properties. It is considered that the pH is an very important factor at the reason of water pollutant with increasing acidity in industrial field. The results of ICP-AES analysis showed that the residual concentration of Ag ions decreased with an increasing electroplating time. The metallic Ag-activated porous carbons electroplated showed microbicidal effects and strong antibacterial activity against six kinds of strains that were used. Finally, we confirmed that the presence of the electrolytic plated Ag-activated porous carbons is a determining factor in the HCl removal by chemical reaction, clarifying the surface chemical behavior.
Abstract
The electroplating of the Ag ions from aqueous solution on activated porous carbons was investigated over a wide range of plating time. The adsorption capacities of Ag metallic carbons were associated with their internal porosity and were related to physical properties such as surface area and pore size distribution. And, surface morphologies and quantitative analysis for the metal supported carbons are investigated by scanning electron microscopy (SEM) and energy disperse X-ray (EDX) measurements to explain the changes in adsorption properties. It is considered that the pH is an very important factor at the reason of water pollutant with increasing acidity in industrial field. The results of ICP-AES analysis showed that the residual concentration of Ag ions decreased with an increasing electroplating time. The metallic Ag-activated porous carbons electroplated showed microbicidal effects and strong antibacterial activity against six kinds of strains that were used. Finally, we confirmed that the presence of the electrolytic plated Ag-activated porous carbons is a determining factor in the HCl removal by chemical reaction, clarifying the surface chemical behavior.
참고문헌 (16)
- Wigman, T, "Carbon", 27(1), pp.13~ (1989)
- Al-Duri, B, "Use of adsorbents for removal of pollutants from waste-waters", pp.1~5 (1996), Boca Raton: CRC press
- Theodorodou, E, "Synthetic Matals", 87, pp.225~ (1997)
- Yoshitake, H, "J. Electroanal Chem.", 361, pp.229~ (1993)
- Fauchais, P, "Surface & Coating Technology", 97, pp.66~ (1997)
- Fu, R.W, "Carbon", 32, pp.593~ (1994)
- Fu, R.W, "Carbon", 36, pp.19~ (1998)
- Zhang, X, "International Symposium on Carbon Science and Technology for New Carbons-Extended Abstracts", pp.502~505 (1998)
- Li, C.Y, "Carbon", 36, pp.61~ (1998)
- de Mugual, S.R, "Applied catalysis a General", 237, pp.71~ (2002)
- Otzuka, K, "Catalysis Today", 97, pp.66~ (1997)
- Oh, W.C, "Carbon", 41, pp.1737~ (2003)
- Bansal, R.C, "Active carbon", pp.198~, New York; Marcel Dekker
- "Annual book of ASTM standards vol. 15. 05" (1996), Philadelphia, PA: America Society for Testing and Materials
- Oh, W.C, "Analytical science & Technology", 13, pp.131~ (2000)
- Oh, W.C, "Analytical science & Technology", 13, pp.194~ (2000)