3D 프린팅으로 제작된 여러 종류의 레진브릿지의 굴곡강도에 대한 연구
Flexural strength of various kinds of the resin bridges fabricated with 3D printing
1
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
목적: 치과 보철물을 적층 가공 기술로 제작하는 것은 많은 이점이 있으나 아직까지 연구 결과 부족으로 인하여 임상에 서 널리 적용되고 있지 못하는 실정이다. 이 연구에서는 디지털 광학 기술 방식의 적층 가공 기술을 이용하여 제작한 치과 보철물에 있어서 재료에 따라 굴곡강도에 유의한 차이가 있는지 연구하기로 한다. 연구 재료 및 방법: 3유닛 고정성보철 형태의 시편 제작을 위한 금속 지그를 제작하였다. 지그에 맞게 시편을 디자인하였다. 디자인 한 시편에 대하여 NC, DP-1, DT-1의 세 가지 재료로 디지털 광학 기술 방식의 출력을 하였다. 각 재료마다 5개의 시편을 제작하되 출력 각도를 수평면에 30°로 하였다. 시편을 지그 위에 안착시키고 만능시험기로 굴곡강도를 측정하고 기록하였다. 기록한 데이터는 SPSS 상에서 일원배치분산분석법을 통하여 재료에 따른 파절 강도 차이의 유의성을 조사하였다. 사후 검정(Tukey Honestly Significant Difference test)은 그룹 간의 통계적 차이를 비교하여 시행되었으며 통계적 유의수준은 0.05로 하였다. 결과: 각 군들의 굴곡강도는 NC군은 1119 ± 305 N로 나타났고 DP-1군은 619 ± 150 N, DT-1군은 413 ± 65 N로 측정되었다. SPSS를 사용한 일원배치분산분석법 및 Tukey HSD에서는 NC와 DP-1, NC와 DT-1사이에 유의한 차이를 보였으며(P < 0.05), DP-1과 DT-1사이에는 유의한 차이를 보이지 않았다(P > 0.05). 결론: 디지털 광학 기술 방식으로 3D프린팅을 하여 제작한 3유닛 고정성 보철 형태의 레진 보철물에 있어서 메타크릴산 에스텔 재료가 높은 굴곡강도를 보여주었다.
Abstract
Purpose: Manufacturing with AM (Additive manufacturing) technique has many advantages; but, due to insufficient study in the area, it is not being widely used in the general clinic. In this study, differences of flexural strength among various materials of 3 unit fixed dental prosthesis were analyzed. Materials and Methods: A metal jig for specimens that had a 3-unit-fixed dental prosthesis figure were fabricated. The jigs were made appropriately to the specifications of the specimens. Three different kinds of materials of specimens which were NC (mathacrylic esther based) , DP-1 (Bisphenol A epoxy acrylate type oligomer based), and DT-1 (urethane acrylate based) were printed with DLP machine. Five specimens for each kind of material were printed with an angle of 30° from the horizontal surface. The specimens were placed on the jig and the flexural strength was measured and recorded using Universal testing machine. The recorded data was analyzed in SPSS using One-way ANOVA and Tukey HSD to determine the significance of the differences of flexural strength among the groups. Results: The flexural strengths of each group were the followings: NC, 1119 ± 305 N; DP-1, 619 ± 150 N; DT-1, 413 ± 65 N. Using One-way ANOVA and Tukey Honestly Significant Difference test, significant difference was found between NC and the other groups (P < 0.05), but there was no significant difference between DP-1 and DT-1 (P > 0.05). Conclusion: Higher flexural strength was shown in 3-unit-fixed dental prosthesis that were 3D printed using a DLP machine with NC material.
참고문헌 (25)
- Ishida Y, "Dimensional accuracy of dental casting patterns created by 3D printers", Dent Mater J, 35, pp.250~256 (2016)
- Kim DY, "Reproducibility of different arrangement of resin copings by dental microstereolithography: evaluating the marginal discrepancy of resin copings", J Prosthet Dent, 117, pp.260~265 (2017)
- Park JY, "In vitro assessment of the marginal and internal fits of interim implant restorations fabricated with different methods", J Prosthet Dent, 116, pp.536~542 (2016)
- Gebhardt A, "Additive manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry", Phys Procedia, 5, pp.543~549 (2010)
- Barazanchi A, "Additive technology: update on current materials and applications in dentistry", J Prosthodont, 26, pp.156~163 (2017)
- Tunchel S, "3D printing", additive manufacturing single titanium dental implants: a prospective multicenter study with 3 years of follow-up, 2016, pp.2016, 8590971~
- Cheng A, "Additively manufactured 3D porous Ti-6Al-4V constructs mimic trabecular bone structure and regulate osteoblast proliferation, differentiation and local factor production in a porosity and surface roughness dependent manner", Biofabrication, 6, pp.045007~ (2014)[DOI]
- Carter SD, "Additive biomanufacturing:an advanced approach for periodontal tissue regeneration", Ann Biomed Eng, 45, pp.12~22 (2017)
- Al Mortadi N, "Fabrication of a resin appliance with alloy components using digital technology without an analog impression", Am J Orthod Dentofacial Orthop, 148, pp.862~867 (2015)
- Chen J, "Shape optimization for additive manufacturing of removable partial dentures - a new paradigm for prosthetic CAD", CAM, 2015, pp.10, e0132552~
- Nakata T, "Clasp fabrication using one-process molding by repeated laser sintering and high-speed milling", J Prosthodont Res, 61, pp.276~282 (2017)
- Neto R, "An engineering-based approach for design and fabrication of a customized nasal prosthesis", Prosthet Orthot Int, 39, pp.422~428 (2015)
- Shankaran G, "Fabrication of a cranial prosthesis combined with an ocular prosthesis using rapid prototyping: a case report", J Dent, 13, pp.68~72 (2016)
- Tsai MJ, "Study of mandible reconstruction using a fibula flap with application of additive manufacturing technology", Biomed Eng Online, 13, pp.57~ (2014)
- Fernandes N, "Reconstruction of an extensive midfacial defect using additive manufacturing techniques", J Prosthodont, 25, pp.589~594 (2016)
- Naveen KS, "Evaluation of flexural strength of resin interim restorations impregnated with various types of silane treated and untreated glass fibres", Med J Armed Forces India, 71, pp.293~298 (2015)
- Partiyan A, "Fracture resistance of threeunit zirconia fixed partial denture with modified framework", Odontology, 105, pp.62~67 (2017)
- Tinschert J, "Fracture resistance of lithium disilicate-, alumina-, and zirconia-based threeunit fixed partial dentures: a laboratory study", Int J Prosthodont, 14, pp.231~238 (2001)
- Mansour Rismanchian, "Flexural strengths of implant-supported zirconia based bridges in posterior regions", The Journal of Advanced of Prosthodontics, 6(5), pp.346~350 (2014), 대한치과보철학회[DOI]
- Cardelli PL, "Mechanical evaluation and fem analysis of stress in fixed partial dentures zirconium-ceramic", Oral Implantol, 6, pp.55~62 (2014)
- Alharbi N, "Effects of build direction on the mechanical properties of 3Dprinted complete coverage interim dental restorations", J Prosthet Dent, 115, pp.760~767 (2016)
- Abdulmohsen B, "A study to investigate and compare the physicomechanical properties of experimental and commercial temporary crown and bridge materials", Dent Mater, 32, pp.200~210 (2016)
- Dittmer MP, "Finite element analysis of a four-unit all-ceramic fixed partial denture", Acta Biomater, 5, pp.1349~1355 (2009)
- Osman RB, "Build angle:does it influence the accuracy of 3D-printed dental restorations using digital light-processing technology?", Int J Prosthodont, 30, pp.182~188 (2017)
- Alharbi N, "Factors influencing the dimensional accuracy of 3D-printed full-coverage dental restorations using stereolithography technology", Int J Prosthodont, 29, pp.503~510 (2016)