본문 바로가기
KERD
논문KCI 등재

수종의 의치상 레진과 레진치아의 전단결합강도에 관한 연구

A Study on the Shear Bond Strength between Various Denture Bases Resin and Artificial Resin Teeth

이준석|조인호|이상욱
대한턱관절교합학회 (Korean academy of stomatognathic function and occlusion)|2005.06|구강회복응용과학지 (Journal of Dental Rehabilitation and Applied Science)|제21권 제1호|pp. 59-67

2

조회

0

다운로드

0

인용

0

참고문헌

주제분류치의학

초록

Abstract

The bond strength of denture base resin and resin teeth, is an important factor in the long term prognosis of dentures. The purpose of this study is to find an appropriate combination of commercial denture base resin and artificial resin teeth according to shear bond strength. In this study, the shear bond strength of various denture base resins (Vertex RS(Dentimax Ziest, Holland), PERform(Hedent GmbH., Germany), SR IVOCAP(Ivoclar AG, Schaan, Liechtenstein)) and resin teeth (SR Orthosit PE(Ivoclar AG, Schaan, Liechtenstein), Trubyte Biotone(Dentsply, U.S.A.)) was evaluated. 1. In comparison of denture resin, the shear bond strength increased in the order of IVOCAP, PERform, Vertex RS. 2. In resin teeth, Trubyte Biotone showed higher strength, but there was no statistical difference between the groups. 3. According to loading direction, the lingual showed higher strength, but there was no statistical difference. 4. When using SR Orthosit PE, SR　 IVOCAP showed significantly higher shear bond strength(p<0.05). 5. Fracture tendancy showed more cohesive fractures(59) than adhesive failures(13). IVOCAP showed the most superior results statistically. TrubyteBiotone showed the highest shear bond strength. When using the SR Orthosit PE, it is thought that IVOCAP would present the most superior results.

참고문헌 (38)

  1. "The University of Michigan 1972"
  2. "Dimensional stability of injection and conventional processing of denture base acrylic resin", 60, pp.394~398 (1988)
  3. "An investigation of the variables which may affect the bond between plastic teeth and denture base resin", 27, pp.129~135 (1999)
  4. "The tooth-denture base bond", 1, pp.117~120 (1993)
  5. "ADA Guide to Dental Materials and Devices", pp.101~102
  6. "International Organization for Standardization", pp.~3336 (1977)
  7. "Acrylic Resin Teeth", pp.~6506 (1989)
  8. "Bonding cold curing denture base acrylic resin to acrylic resin", 83, pp.601~606 (1971)
  9. "Shear bond strength of denture teeth to base:a comparative study", 27, pp.425~428 (1996)
  10. "The effects of polymerization temperature on the acrylic resin denture base-tooth bond", 10, pp.49~54 (1997)
  11. "Adhesion of denture tooth porcelain to heat-polymerized denture resin", 74, pp.242~249 (1995)
  12. "A comparison of six acrylic resin processing techniques", 80, pp.1301~1320 (1970)
  13. "system and the structure of denture bases", pp.59~62
  14. "Evaluation of dimensional changes in complete dentures processed by injection-pressing and the pack-and-press technique", 50, pp.757~761 (1983)
  15. "Strength of the acrylic denture base tooth bond", 153, pp.187~190 (1982)
  16. "Comparative tensile bond strength of heat-cured and light cured denture base resins bonded to continuous-pressure injection type denture base resin"
  17. "A new visible light-cured resin system applied to removable prosthodontics", 56, pp.497~506 (1986)
  18. "A comparison of the bond strengths of microwave- and water bath-cured denture material", 70, pp.406~409 (1993)
  19. "Application of microwave for dental technique Development of model materials for microwave polymerization", pp.41~50, J Osaka Univ Dent Sch 1987
  20. "Tensile bond strength of acrylic resin denture teeth to a microwave- or heat-processed denture base", 88, pp.145~150 (2002)
  21. "A study on the physical properties and volumetric stability of SR-ivocap resin system"
  22. "Failure load of acrylic resin denture teeth bonded to high impact acrylic resins", 80, pp.666~671 (1998)
  23. "Bond strength and failure analysis of light-cured denture resins bonded to denture teeth", 65, pp.315~324 (1991)
  24. "Light microscopic examination on the bonding of denture base resin and acrylic resin teeth", Dankook Univ
  25. "Comparative bond strengths of autopolymerizing denture resin and light cured composite resin to denture teeth", 52, pp.20~24 (2002)
  26. "The strength of the joint between plain and copolymer acrylic teeth and denture base resin", 107, pp.317~320 (1958)
  27. "Bonding of plastic teeth to denture base resins", 66, pp.566~571 (1991)
  28. "The acrylic denture", 18, pp.257~267 (1961)
  29. "Bond strength of denture teeth to denture base resins", 13, pp.59~65 (2000)
  30. "Bonding of plastic teeth to two heat-curing denture base resins", 39, pp.565~568 (1978)
  31. "Bonding of plastic teeth to heat-cured denture base resins", 44, pp.285~287 (1952)
  32. "Adhesive bonding of denture base resins to plastic denture teeth", 24, pp.1091~1030 (1990)
  33. "An experimental study of the bond strength of denture teeth bonded to denture base materials J Korean Acad of Prosthodonti 1996"
  34. "Comparative study of the bond strengths of three abrasion-resistant plastic denture teeth bonded to a cross-linked and a grafted,cross- linked denture base material", 55, pp.701~708 (1986)
  35. "Bonding durability of conventional resinous denture teeth and highly crosslinked denture teeth to a pour-type denture base resin", 13, pp.112~116 (2000)
  36. "Bonding of plastic teeth to acrylic resin denture base material", 69, pp.467~477 (1961)
  37. "An investigation of the adhesion of acrylic resin teeth to dentures", 58, pp.389~392 (1987)
  38. "An investigation of the adhesion of acrylic resin teeth to dentures", 58, pp.389~392 (1987)

관련 논문AI추천

의치용 레진치와 수복용 복합레진 간의 결합강도에 관한 연구김미리, 임장섭, 전영찬, 정창모대한치과보철학회 · 대한치과보철학회지2002 · 제40권 제2호레진 인공치아의 재부착 방법에 따른 전단결합강도에 관한 연구김익중, 이종혁, 조인호대한턱관절교합학회 · 구강회복응용과학지2005 · 제21권 제2호Thermocycling이 첨상용 레진과 금속 의치상간의 전단결합강도에 미치는 영향이준석대한턱관절교합학회 · 구강회복응용과학지2005 · 제21권 제2호결합면 형태가 이장용 레진의 결합강도에 미치는 영향박은주, 진태호대한치과보철학회 · 대한치과보철학회지2004 · 제42권 제2호가압주사식 열가소성 의치상 레진과 이장 레진 간의 결합강도에 관한 연구문태성, 임장섭, 전영찬, 정창모대한치과보철학회 · 대한치과보철학회지2002 · 제40권 제1호의치 세정제가 의치상 레진과 이장용 레진의 결합강도와표면경도에 미치는 영향김계순, 김유리, 정회열, 조혜원대한치과보철학회 · 대한치과보철학회지2003 · 제41권 제4호

이 간행물의 다른 논문 (7건)

임플랜트-지대주의 내측연결 시스템에서 하중의 위치 및 경사에 따른 임플랜트 보철의 유한요소 응력분석정용태, 정재헌, 장종석pp. 1-14시효와 열순환 처리가 수복용 복합레진의 인장강도에 미치는 영향이미정, 유미경, 이광원pp. 15-23불소방출성 수복재의 불소 재충전에 따른 불소유리와 표면변화유미경, 문장원, 이광원pp. 25-32양극산화와 열수처리한 Ti-6Al-7Nb 합금의 표면 특성송광엽, 김문영, 배태성pp. 33-42측두하악장애와 교합요인의 관계이유식, 김성택pp. 43-57
원문 보기