다양한 현장내시공성시험에 근거한 토목섬유 보강재의 시공성 감소계수 평가
Installation Damage Reduction Factor for Geosynthetics Reinforcements Based on Various Full-Scale Field Installation Tests
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
본 연구에서는 토목섬유 보강재의 시공중 손상 정도를 규명하기 위하여 국내에서 많이 사용되고 있는 주요 토목섬유 보강재제품(7개 사의 15 종류)을 대상으로 다양한 입도의 성토재료를 적용한 현장내시공성시험을 수행하였다. 현장내시공성시험은FHWA(2009) 지침을 참조하여 수행하였으며, 다짐시공 후 추출된 토목섬유 보강재 시료에서 인장강도 시편(크기 0.2m × 1.4m)을 최대 20개 이상 균등하게 샘플링하여 인장강도시험을 수행함으로써 시공에 따른 인장강도 감소 정도를 분석하였다. 분석 결과, 성토재료의 다짐시공으로 인한 토목섬유 보강재의 인장강도 감소 정도는 토목섬유 보강재의 종류와 성토재료의최대입경에 크게 영향을 받으며, 비교적 강성이 작은 PET 결합형 지오그리드(PVC 코팅)의 인장강도 감소율이 가장 크게나타났고, 전반적으로 성토재료의 최대입경이 클수록 인장강도 감소율은 더욱 크게 나타남을 알 수 있었다. 또한, 이 시험결과와 함께 기 수행된 현장내시공성시험 결과들을 분석하여 토목섬유 보강재의 시공성 감소계수를 보다 합리적으로 평가할 수있는 방안을 제시하였다.
Abstract
In this paper, to investigate the influence of installation damage, a variety of full-scale field installation tests with 15 geosynthetics reinforcements and fill materials of various grain size distribution have been performed. The full-scale field installation test was conducted with reference to the FHWA (2009) guidelines. The tensile strength tests were performed by sampling up to 20 specimens randomly from the excavated geosynthetics reinforcements after compaction of fill material, and the degree of decrease in tensile strength of reinforcements due to compaction was analyzed based on the experiment results. It was found that the degree of tensile strength reduction of geosynthetics reinforcements due to the compaction of fill material is greatly influenced by the type of reinforcement and the maximum diameter of fill material. In addition, it was found that the strength reduction ratio of PET geogrid (PVC coating) with relatively small stiffness was greatest, and that the larger the maximum grain size of the fill material, the greater the strength reduction ratio. And also, a more reasonable evaluation method for the installation damage reduction factor of geosynthetics reinforcements is proposed based on the results of full-scale field installation tests in present study and the existing test results.
참고문헌 (21)
- Allen, T. M., "Combined allowable strength reduction factor for geosynthetic creep and installation damage", Geosynthetics International, 3(3), pp.407~439 (1996)
- "ASTM D 5818, Standard practices for obtaining samples of geosynthetics from a test section for assessment of installation damage", Annual Book ASTM Standards, ~ (2011)
- Bräu, G., "Damage of geosynthetics during installationexperience from real sites and research works", Proc. of the First European Geosynthetics Conference, 1, pp.145~150 (1996)
- "BS 8006, Code of practice for strengthened", reinforced soils and other fills, 2010
- Cho, S. D., "Experimental study for installation damage assessment of geogrid", Journal of Korea society for Environmental Restoration And Revegetation Technology, 8(1), pp.27~36 (2005)
- Cho, S. D., "Experimental investigations of combination effects of installation damage and creep deformation on long-term design strength of geogrids", Journal of Korean Geosynthetics Society, 4(4), pp.23~37 (2005)
- Corrosion, "Degradation of Soil Reinforcements for Mechanically Stabilized Earth Walls and Reinforced Soil Slopes", Elias, V., 2009, pp.146~, FHWA-NHI-09-087
- Recommendations for Design and Analysis of Earth Structures using Geosynthetic Reinforcements, "German Geotechnical Society", EBGEO, 24~26 (2011)
- Greenwood, J. H., "The effect of installation damage on the long-term design strength of a reinforcing geosynthetics", Geosynthetics International, 9(3), pp.247~258 (2002)
- GSI, "Determination of the long-term design strength of flexible geogrids", GSI Test Methods GG4(b), Drexel University, ~ (2005)
- 한상현, "다양한 지오그리드의 인장강도-인장변형 관계 특성", 한국지반환경공학회 논문집, 13(2), pp.83~93 (2012), 한국지반환경공학회
- Hufenus, R., "Strength reduction factors due to installation damage of reinforcing geosynthetics", Geotextiles and Geomembranes, 23(5), pp.401~424 (2005)
- ISO, "Geotextiles and geotextile-related products -method for installing and extracting samples in soil, and testing specimens in laboratory", ISO 13437, ~ (1998)
- Koerner, G. R., "The installation survivability of geotextiles and geogrids", Proc. of the Fourth International Conference on Geotextiles, Geomembranes and Related Products, pp.597~602 (1990)
- "KSK ISO 10319, Geotextiles− Wide width tensile test", ~ (2007)
- 박주환, "보강토 옹벽용 지오그리드의 현장 내시공성 및 강도 감소계수 평가에 관한 연구", 한국지반환경공학회 논문집, 13(7), pp.5~12 (2012), 한국지반환경공학회[DOI]
- Pinho-Lopes, M., "Experimental analysis of the combined effect of installation damage and creep of geosynthetics-New result", Proc. of the Seventh International Conference on Geosynthetics, pp.1539~1544 (2002)
- Geogrid for reinforcement of ground and embankment - T RIGRID EX, Construction Technical Evaluation Certification Report, "Public Works Research Center", 54~56 (2013)
- Rainey, T., "Construction induced reduction in tensile strength of polymer geogrids", Proc. of the Geosynthetics Conference, pp.729~742 (1993)
- Troost, G.H., "Influence of weaving structure and coating on the degree of mechanical damage of reinforcing mats and woven geogrids, caused by different fills, during installation", Proc. of the Fourth International Conference on Geotextiles, Geomembranes and Related Products, pp.609~614 (1990)
- Watts, G.R.A., "Geosynthetics-installation damage and the measure -ment of tensile strength", Proc. of the Fifth International Conference on Geotextiles, Geomembranes and Related Products, pp.1159~1164 (1994)