본문 바로가기
KERD
논문KCI 등재

심하게 마모된 치열을 가진 환자의 완전구강회복

Full Mouth Rehabilitation in a Patient with Severely Worn Dentition

0

조회

0

다운로드

6

인용

0

참고문헌

키워드

주제분류치의학

초록

다수의 구치 상실로 인한 구치부 지지의 부족은 일차적으로 대합치의 정출 및 잔존치의 과도한 교합하중을 발생시킨다. 대합치의 정출은 교합평면의 부조화(reverse curve)와 보철수복공간의 부족을 일으킬 수 있다. 잔존치의 과도한 교합하중 역시 전치의 전방돌출이나, 잔존치의 급속한 마모를 일으켜 적절한 전방유도의 상실 및 교합의 부조화, 보철수복공간의 부족을 일으킬 수 있다. 이러한 환자의 경우, 치과의사는 현재의 교합수직고경이 적절한지의 여부를 판단한 후, 환자가 적응할 수 있는 범위 내에서 기능적, 심미적인 수직고경을 정하고, 반복재현 가능한 하악위에서 적절한 전방유도와 교합평면을 설정해야 한다. 본 증례에서는 구치부 상실 및 대합치의 정출, 그리고 잔존치의 심한 마모로 인하여 교합수직고경 및 교합평면이 붕괴된 환자의 완전구강회복 증례를 문헌 고찰과 함께 보고하고자 한다.

Abstract

Inadequate or unstable posterior support cause extrusion of antagonistic teeth and overloading of remaining teeth. Extrusion of antagonistic teeth result in collapsed occlusal plane and decreased prosthetic space. Also, overloading of remaining teeth increase occlusal wear or anterior extrusion of anterior teeth, which is resulting in loss of anterior guidance, disharmony of occlusion and decreased prosthetic space. In this case, careful evaluation of OVD(occlusal vertical dimension) is the general first trial to regain appropriate function and esthetics. Simultaneously, adequate anterior guidance and harmonious occlusal plane should be established in the repeatable reference position of the mandible. We report this case because severely worn dentition achieved functional and esthetic results from full mouth rehabilitation with increased vertical dimension and use of centric relation.

참고문헌 (39)

  1. 정재현, "심한 교모증 환자에서의 진단 및 치료계획 수립", 대한치과턱관기능교합학회지, 19, pp.240~245 (2003)
  2. Rosental SF, "Comtemporary fixed prosthodontics 4th" (2008), Elsevier
  3. Dawson PE, "Evaluation, diagnosis and treatment of occlusal problems 2nd ed" (1989), Mosby
  4. Rugh JD, "Vertical dimension : A study of clinical rest position and jaw muscle activity", J Prosthet Dent, 45, pp.670~675 (1981)
  5. Ramfjord SP, "Increased occlusal vertical dimension in adult monkeys", J Prosthet Dent, 45(1), pp.74~83 (1981)
  6. Olsen, ES, "A radiographic study of variations in the physiologic rest position of the mandible in seventy edentulous individuals", J Dent Res, 30, pp.517~ (1951)
  7. Dombrady, L, "Investigation into the transient instability of the rest position", J Prosthet Dent, 16, pp.479~490 (1966)
  8. Atwood, DA, "A cephalometric study of the clinical rest position of the mandible. Part Ⅲ", J Prosthet Dent, 8, pp.698~708 (1958)
  9. Sheppard IM, "Vertical dimension measurements", J Prosthet Dent, 34, pp.269~277 (1975)
  10. Tallgren A, "Changes in adult face height due to aging, wear and loss of teeth and prosthetic treatment. A roentgen cephalometric study mainly on Finnish women", Acta Odontal Scan, 15, pp.1~112 (1957)
  11. Tallgen A, "The reduction in face height of edentulous in partially edentulous subjects during long-term denture wear, a longitudinal roentgenographic cephalometric study", Acta Odontal Scan, 24, pp.195~239 (1966)
  12. Swerdlow H, "Roentgenocephalometric study of vertical dimension changes in immediate denture patient", J Prosthet Dent, 14, pp.635~650 (1964)
  13. Atwood DA, "A cephalometric study of the clinical rest position of the mandible. Part Ⅱ", J Prosthet Dent, 8, pp.544~552 (1957)
  14. Cohen S, "A cephalometric study of rest position in edentulous persons : Influence of variations in head position", J Prosthet Dent, 7, pp.467~472 (1957)
  15. 김남중, "교합고경의 인위적인 증가에 따른 저작계의 반응에 관한 연구", 대한치과의사학회지, 33(4) (1995)
  16. Waerhaug J, "Periodontal changes incident to prolonged occlusal overload in monkeys", Odontal Scan, 24, pp.91~104 (1966)
  17. Carlsson GE, "Effect of increasing vertical dimension on the masticatory system in subjects with natural teeth", J Prosthet Dent, 41, pp.284~289 (1979)
  18. 권긍록, "교합고경이 붕괴된 환자의 보철치료", 대한치과턱관절기능교합학회지, 20, pp.169~181 (2004)
  19. Pleasure MA, "Correct vertical dimension and freeway space", J Am Dent Assoc, 43, pp.160~163 (1951)
  20. McGee GF, "Use of facial measurements in determining vertical dimension", J Am Dent Assoc, 35, pp.342~350 (1947)
  21. Thomson JR, "The rest position of the mandible and its significance to dental science", J Am Dent Assoc, 33, pp.151~180 (1946)
  22. Niswonger ME, "The rest position of the mandible and centric relation", J Am Dent Assoc, 21, pp.1572~1582 (1934)
  23. Mack MR, "Vertical dimension : A dynamic concept based on facial form and oropharyngeal function", J Prosthet Dent, 66, pp.478~485 (1991)
  24. 황두연, "수직고경의 회복에 대한 문헌적 고찰", 대한치과보철학회지, 35, pp.211~220 (1997)
  25. Silverman MM, "The speaking method in measuring vertical dimension", J Prosthet Dent, 14(4), pp.635~650 (1964)
  26. Pound E, "The vertical dimension of speech : the pilot of occlusion", J Calif Dent Assoc, 6(2), pp.42~47 (1978)
  27. Shanahan TEJ, "Physiologic vertical dimension and centric relation", J Prosthet Dent, 6, pp.741~747 (1956)
  28. Turner KA, "Restoration of the extremely worn dentition", J Prosthet Dent, 4, pp.467~474 (1984)
  29. "The glossary of prosthodontics terms", J Prosthet Dent, 94(1), pp.10~92 (2005)
  30. Lucia VO, "A technique for recording centric relation", J Prosthet Dent, 14(3), pp.492~505 (1964)
  31. Long JH, "Locating centric relation with a leaf gauge", J Prosthet Dent, 29(6), pp.608~610 (1973)
  32. Woelfel JB, "New device for accurately recording centric relation", J Prosthet Dent, 56(6), pp.716~727 (1986)
  33. Campos AA, "Reproducibility and condylar position of a physiologic maxillomandibular centric relation in upright and supine body position", J Prosthet Dent, 76(3), pp.282~287 (1996)
  34. McHorris WH, "Centric relation", J Gnathology, 5, pp.5~21 (1986)
  35. Williamson EH, "Centric relation : A comparison of muscle determined position and operator guidance", Am J Ortho, 77, pp.133~145 (1980)
  36. Dawson PE, "Centric relation. Its effect on occlusomuscle harmony", Dent Clin North Am, 23(2), pp.169~180 (1979)
  37. 최진웅, "하악 중심위 유도 방법에 따른 하악위의 재현성 및 변위량에 관한 비교연구", 대한치과보철학회지, 26 (1988)
  38. 이승정, "한국 성인유치악자 하악치열궁의 교합평면에 관한 연구", 경희치대 논문집, ~ (1987)
  39. 권긍록, "정상 한국인의 하악 전방 운동시 시상과로각과 절치로각에 관한 연구", 대한치과보철학회지, 27 (1987)

관련 논문AI추천

이 간행물의 다른 논문 (8건)