논문KCI 등재
상악 무치악 환자에서 가공 지르코니아 바와 PEKK 슬리브를 이용한 임플란트피개의치 증례
Maxillar implant-retained overdenture using CAD/CAM milled zirconia bar with PEKK sleeve: a case report
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
주제분류치의학
초록
본 증례에서는 상악 완전 무치악 환자에서 CAD/CAM으로 가공 지르코니아 바와 PEKK 슬리브를 제작하여, 바 어태치먼트를 활용한 임플란트 지지형 피개의치로 수복하였다. 2년간의 정기적인 경과 관찰 결과 심미적, 기능적으로 만족할 만한 결과를 얻었기에 이를 보고하는 바이다.
Abstract
The object of this case report is to introduce milled zirconia bar and PEKK female part made by CAD/CAM technology for bar attachment implant supported overdenture in maxillary edentulous patients. For over 2 years, in terms of function and esthetics, satisfactory result was obtained. Esthetically and functionally satisfactory results were obtained in periodic follow up check.
참고문헌 (15)
- Zitzmann NU, "Treatment plan for restoring the edentulous maxilla with implantsupported restorations: removable overdenture versus fixed partial denture design", J Prosthet Dent, 82, pp.188~196 (1999)
- Zembic A, "Patient-reported outcomes of maxillary implant-supported overdentures compared with conventional dentures", Clin Oral Implants Res, 25, pp.441~450 (2014)
- Sanna A, "Successful outcome of splinted implants supporting a ‘planned’ maxillary overdenture: a retrospective evaluation and comparison with fixed full dental restoration", Clin Oral Implants Res, 20, pp.406~413 (2009)
- Sadowsky SJ, "Protocols for the maxillary implant overdenture: a systematic review", Int J Oral Maxillofac Implants, (31 Suppl), pp.s182~s191 (2016)
- 김하영, "Attachment systems for mandibular implant overdentures: a systematic review", The Journal of Advanced of Prosthodontics, 4(4), pp.197~203 (2012), 대한치과보철학회[DOI]
- Stoumpis C, "To splint or not to splint oral implants in the implant-supported overdenture therapy? A systematic literature review", J Oral Rehabil, 38, pp.857~869 (2011)
- Murray MD, "The evolution of the complete denture base. Theories of complete denture retention - a review. Part 1", Aust Dent J, 38, pp.216~219 (1993)
- Petropoulos VC, "Comparison of retention and release periods for implant overdenture attachments", Int J Oral Maxillofac Implants, 12, pp.176~185 (1997)
- Sadowsky SJ, "Treatment considerations for maxillary implant overdentures: a systematic review", J Prosthet Dent, 97, pp.340~348 (2007)
- van Kampen F, "Retention and postinsertion maintenance of barclip, ball and magnet attachments in mandibular implant overdenture treatment: an in vivo comparison after 3 months of function", Clin Oral Implants Res, 14, pp.720~726 (2003)
- Mericske-Stern RD, "Management of the edentulous patient", Clin Oral Implants Res, 11, pp.108~125 (2000)
- Katsoulis J, "In vitro precision of fit of computer-aided design and computer-aided manufacturing titanium and zirconium dioxide bars", Dent Mater, 29, pp.945~953 (2013)
- Najeeb S, "Applications of polyetheretherketone (PEEK) in oral implantology and prosthodontics", J Prosthodont Res, 60, pp.12~19 (2016)
- 박찬, "Use of polyaryletherketone (PAEK) based polymer for implant-supported telescopic overdenture: A case report", The Journal of Advanced of Prosthodontics, 9(1), pp.74~76 (2017), 대한치과보철학회[DOI]
- Passia N, "Long-term retention behaviour of resin matrix attachment systems for overdentures", J Mech Behav Biomed Mater, 57, pp.88~94 (2016)
관련 논문AI추천
CAD/CAM으로 제작된 milled titanium bar와 Locator®를 이용한 상악 임플란트 유지 피개의치: 증례보고김민정, 오상천, 허윤혁대한턱관절교합학회 · 구강회복응용과학지2014 · 제30권 제1호CAD/CAM 맞춤형 지대주를 이용한 milled-bar 피개의치 증례지운, 권주현, 김선재, 장재승대한치과보철학회 · 대한치과보철학회지2016 · 제54권 제2호CAD/CAM 시스템으로 제작한 Milled Bar를 이용한 하악 임플란트 피개의치 수복증례박찬, 박상원, 반민희, 신진호, 양홍서, 윤귀덕, 임현필대한치과보철학회 · 대한치과보철학회지2017 · 제55권 제3호상악 완전 무치악에서 Locator^Ⓡ attachment가 장착된 milled titanium bar를 이용한 임플란트 지지 피개의치: 증례 보고김민정, 오상천, 한지석대한턱관절교합학회 · 구강회복응용과학지2011 · 제27권 제2호상악 무치악 환자에서 Milled Bar와 ADD-TOC을 이용한 임플란트 피개의치 수복 증례김민정, 윤미정, 이소현, 정창모, 조용범, 허중보대한치과보철학회 · 대한치과보철학회지2022 · 제60권 제2호상악 완전 무치악 환자에서 CM LOCⓇ PekktonⓇ attachment를 이용한 임플란트 유지 피개의치 수복 증례신수연, 홍문기대한턱관절교합학회 · 구강회복응용과학지2017 · 제33권 제4호
이 간행물의 다른 논문 (10건)
임상가가 알아두면 유용한 LED 광중합기의 특성과 세대별 분류심영보, 최안나, 박정길pp. 245-251임플란트 지지 고정성 보철물에서 금과 지르코니아의 마모 비교에 대한 임상 연구양승원, 김지환, 오남식pp. 252-2593D 프린팅으로 제작된 여러 종류의 레진브릿지의 굴곡강도에 대한 연구박지만, 김장현, 곽재영, 박상모, 전윤태, 김성균pp. 260-268A comparative study on the user satisfaction between two different piezoelectric engines이완선, 최소영, 이규복, 임현미pp. 269-277콘빔형 전산화단층영상을 이용한 자연치 치간거리의 평가이완, 오상천, 공현준pp. 278-283
