동력계를 이용한 분절관성모멘트 측정 방법
Methods for Measurement of Moment of Segmental Inertia Using a Dynamometer
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Moments of inertia of limb segments are essential to calculate parameters related to the segmental rotation. To analyze the human motion accurately and specifically, moments of inertia obtained from the individual are required. In this study, a simple method to determine a subject-specific moment of segmental inertia using a dynamometer is introduced. In order to evaluate the method, one male participated to test for his forearm plus hand on a commercial dynamometer. Three passive speeds, i.e. 240, 270, and 300o/s, were chosen to confirm whether the moment of inertia values at each speed approach to a fixed value. The same procedure was repeated on the day after to evaluate whether the method is reproducible. As the results, there were no significant differences among the speeds and between the days. The value of the moment of the forearm inertia was 0.216 kg·m2 that is apparently higher compared to values by previous models. Nonetheless, it seems to be acceptable based on our body mass index analysis using reported subject height and mass in each previous study. According to our results, the developed method could be useful to determine the segmental moment of inertia of an individual, showing no significant differences among the speeds and between the days. Thus, we believe that our results are reliable according to two appropriate evaluation procedures. This finding would be helpful to calculate segmental rotation related parameters of an individual.
Abstract
Moments of inertia of limb segments are essential to calculate parameters related to the segmental rotation. To analyze the human motion accurately and specifically, moments of inertia obtained from the individual are required. In this study, a simple method to determine a subject-specific moment of segmental inertia using a dynamometer is introduced. In order to evaluate the method, one male participated to test for his forearm plus hand on a commercial dynamometer. Three passive speeds, i.e. 240, 270, and 300o/s, were chosen to confirm whether the moment of inertia values at each speed approach to a fixed value. The same procedure was repeated on the day after to evaluate whether the method is reproducible. As the results, there were no significant differences among the speeds and between the days. The value of the moment of the forearm inertia was 0.216 kg·m2 that is apparently higher compared to values by previous models. Nonetheless, it seems to be acceptable based on our body mass index analysis using reported subject height and mass in each previous study. According to our results, the developed method could be useful to determine the segmental moment of inertia of an individual, showing no significant differences among the speeds and between the days. Thus, we believe that our results are reliable according to two appropriate evaluation procedures. This finding would be helpful to calculate segmental rotation related parameters of an individual.
참고문헌 (19)
- J.H. Allum, "The relaxed oscillation technique for the determination of the moment of inertia of limb segments", Journal of Biomechanics, 9, pp.21~25 (1976)
- A.J. Peyton, "Determination of the moment of inertia of limb segments by a simple method", Journal of Biomechanics, 19, pp.405~410 (1986)
- J.G. Andrews, "Methods for investigating the sensitivity of joint resultants to body segment parameter variations", Journal of Biomechanics, 29, pp.651~654 (1996)
- W. T. Dempster, "Space requirements of the seated operator" (1955), Wright-Patterson Air Force Base
- J. Muri, "Changes in segmental inertial properties with age", Journal of Biomechanics, 41, pp.1809~1812 (2008)
- E. Kellis, "The effects of antagonist moment on the resultant knee joint moment during isokinetic testing of the knee extensors", European Journal of Applied Physiology, 76, pp.253~259 (1997)
- H. Negahban, "The eccentric torque production capacity of the ankle, knee, and hip muscle groups in patients with unilateral chronic ankle instability", Asian Journal of Sports Medicine, 4, pp.144~152 (2013)
- D.G. Lloyd, "An EMG-driven musculoskeletal model to estimate muscle forces and knee joint moments in vivo", Journal of Biomechanics, 36, pp.765~776 (2003)
- 손종상, "근육 파라미터 최적화를 통한 발목관절 모멘트 추정 모델 개발 및 평가", 의공학회지, 31(4), pp.310~315 (2010), 대한의용생체공학회
- C.L. Lim, "Modelling of knee joint muscles during the swing phase of gait-a forward dynamics approach using MATLAB", Simulink, 2003, pp.11, 91~107
- R. S. Barrett, T. F. Besier, and D. G. Lloyd, "Individual muscle contributions to the swing phase of gait : An EMG-based forward dynamics modelling approach", Simulation Modelling Practice and Theory, 15, pp.1146~1155 (2007)
- T.K.K. Koo, "Feasibility of using EMG driven neuromusculoskeletal model for prediction of dynamic movement of the elbow", Journal of Electromyography and Kinesiology, 15, pp.12~26 (2005)
- L. Li, "Incorporating ultrasound-measured musculotendon parameters to subject-specific emg-driven model to simulate voluntary elbow flexion for persons after stroke", Clinical Biomechanics, 24, pp.101~109 (2009)
- P. de Leva, "Adjustments to zatsiorsky-seluyanov's segment inertia parameters", Journal of Biomechanics, 29, pp.1223~1230 (1996)
- Y. Ma, "Nonlinear regression equations for segmental mass-inertial characteristics of korean adults estimated using three-dimensional range scan data", Applied Ergonomics, 42, pp.297~308 (2011)
- Y. Ma, "Segment inertial parameters of korean adults estimated from three-dimensional body laser scan data", International Journal of Industrial Ergonomics, 41, pp.19~29 (2011)
- T. Richard Nichols, "The contributions of muscles and reflexes to the regulation of joint and limb mechanics", Clinical Orthopaedics and Related Research, 403S, pp.S43~S50 (2002)
- D.G. Thelen, "Simulation of biceps femoris musculotendon mechanics during the swing phase of sprinting", Medicine & Science in Sports & Exercise, 37, pp.1931~1938 (2005)
- D. G. Thelen, E. S. Chumanov, M. A. Sherry and B. C. Heiderscheit, "Neuromusculoskeletal models provide insights into the mechanisms and rehabilitation of hamstring strains", Exercise and Sport Sciences Reviews, 34, pp.135~141 (2006)