3차원 수치모형에 의한 횡월류위어의 수리학적 평가
The Hydraulic Assessment of Side Weir using 3D Computational Fluid Dynamics Program
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The objectives of this study are to analyze flow characteristics for a side weir, which is an inlet structure for flow discharge reduction in the main channel through 3 dimensional numerical analysis and to understand the efficiency of the overflow effect at the side weir. In this study over 40 simulations using FLOW-3D, a computational fluid dynamics program were conducted, and the results were analyzed to find the influence of the flow hydraulics, geometry,channel and weir shapes on the coefficient. It is especially considered the relatively high stage in downstream that may cause flow within channel to be backed up along the channel. Additionally by setting up the scale of simulations much larger than the existing test equipment designed by other researchers, it is intended to analyze more accurate hydraulic behavior along with the realistic hydraulic features such as structures and volumes of flow. The results show that for design with subcritical flow only if the Froude number of upstream is sustained below 0.5 and the length of weir is 33-100% of the width of channel, it is expected to improve the efficiency of the overflow over a side weir.
Abstract
The objectives of this study are to analyze flow characteristics for a side weir, which is an inlet structure for flow discharge reduction in the main channel through 3 dimensional numerical analysis and to understand the efficiency of the overflow effect at the side weir. In this study over 40 simulations using FLOW-3D, a computational fluid dynamics program were conducted, and the results were analyzed to find the influence of the flow hydraulics, geometry,channel and weir shapes on the coefficient. It is especially considered the relatively high stage in downstream that may cause flow within channel to be backed up along the channel. Additionally by setting up the scale of simulations much larger than the existing test equipment designed by other researchers, it is intended to analyze more accurate hydraulic behavior along with the realistic hydraulic features such as structures and volumes of flow. The results show that for design with subcritical flow only if the Froude number of upstream is sustained below 0.5 and the length of weir is 33-100% of the width of channel, it is expected to improve the efficiency of the overflow over a side weir.
참고문헌 (20)
- 박태선, "구형 수로내 횡월류 흐름의 특성", 한국수자원학회 논문집, 35(3), pp.251~259 (2002), 한국수자원학회
- 이두한, "FlOW-3D 모형을 이용한 횡월류위어 흐름 특성 검토", 2005 대한토목학회 정기학술대회논문집, pp.245~248 (2005)
- 방수로(지하) 분수로 설계기술 현황조사 및 개발방향 수립, "한국건설기술연구원", ~ (2004)
- Ackers, P., "A theoretical consideration of side weir as storm water flows", Proc. Institution of Civil Engineers, 통권 : 6, pp.250~269 (1957)
- Ackers, P., "A Theoretical Consideration of Side Weirs as Stormwater Overflows, Hydraulics Paper No 11", Symposium of Four Papers on Side Spillways (1957)
- Borghei, S. M, "Discharge coefficient for sharpcrested side weir in subcritical flow", Journal of Hydraulic Engineering, 125(10), pp.1051~1056 (1999)
- Cheong, H. F., "Discharge coefficient of lateral diversion from trapezoidal channel", Journal of Irrigation and Drainage Engineering, 117(4), pp.461~475 (1991)
- Collinge, V. K., "The Discharge Capacity of Side Weirs, Hydraulics Paper No 13", Symposium of Four Papers on Side Spillways (1957)
- De March, G., "Saggio Di Teoria Di Funzionamente Degi Stramazzi Laterali", L’Energia Elettrica, 통권 : 11, pp.849~860 (1934)
- Flow Science, "FLOW-3D (Theory Manual)", ~, pp.지침서 (2000)
- Hager, W. H., "Lateral outflow over side weirs", Journal of Hydraulic Engineering, ASCE, 113(4), pp.491~504 (1987)
- Hager, W. H., "Distribution Channels", Journal of Hydraulic Engineering, ASCE, 112(10), pp.935~952 (1986)
- Henderson, F. M., "Open channel flow" (1996), Macmillan Publishing Co., Inc.
- Jalili, M. R., "Discussion of discharge coefficient of rectangular side weir", Journal of Irrigation and Drainage Engineering, ASCE, 122(2), pp.132~ (1996)
- Physical modeling for side-channel weirs, "Lee, K. L.", ~, pp.CRWR Online Report 02-2 (2002)
- May, R. W. P., "Hydraulic Design of Side Weirs" (2003), HR Wallingford
- Ranga Raju, K. G., "Side weir in rectangular channel", Journal of Hydraulic Engineering, ASCE, 105(5), pp.547~554 (1979)
- Ramamurthy, A. S., "Lateral Weir Flow Model", Journal of Irrigation and Drainage Engineering, ASCE, 106(1), pp.9~25 (1980)
- Singh, R., "Discharge coefficient of rectangular side weirs", Journal of Irrigation and Drainage Engineering, ASCE, 122(2), pp.132~ (1994)
- Subramanya, K., "Spatially varied flow over side-weirs", Journal of Hydraulic Engineering, ASCE, 98(HY1), pp.1~10 (1972)