실측파형과 유한요소해석을 통한 방진구의 위치별 진동 저감 연구
A Study on the Vibration Reduction by the Position of Borehole using Experimental Waveform and Finite Element Analysis
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
In order to improve the environmental vibration, it is necessary to method for not only reduce the vibration source, but also control the vibration path. In this study, we used borebole for estimate the vibration reduction. And also, we analyzed displacement and vibration velocity caused by the position of borehole as well as the condition of borehole in ground structure. Visual FEA(Finite Element Analysis) program was used in this numerical analysis. The results are as follows : The displacement magnitude and X, Y direction displacement were represented to different results due to the condition and position of borehole, and were represented to the lowest values when the position of borehole is the most close condition from the vibration source. And also, the vibration velocity was decreased as using borebole in ground structure. The isolation efficiency of the vibration was calculated to maximum 18.40% when borehole was established to the most close position from the vibration source and the receive point.
Abstract
In order to improve the environmental vibration, it is necessary to method for not only reduce the vibration source, but also control the vibration path. In this study, we used borebole for estimate the vibration reduction. And also, we analyzed displacement and vibration velocity caused by the position of borehole as well as the condition of borehole in ground structure. Visual FEA(Finite Element Analysis) program was used in this numerical analysis. The results are as follows : The displacement magnitude and X, Y direction displacement were represented to different results due to the condition and position of borehole, and were represented to the lowest values when the position of borehole is the most close condition from the vibration source. And also, the vibration velocity was decreased as using borebole in ground structure. The isolation efficiency of the vibration was calculated to maximum 18.40% when borehole was established to the most close position from the vibration source and the receive point.
참고문헌 (10)
- 孫允基, "방진벽에 의한 표면파 산란의 유한 요소 해석", 석사, 토목공학, pp.1998
- 이강일, "진동차단공의 재료별 방진효과에 관한 해석적 연구", 한국토목섬유학회 논문집, 5(2), pp.23~30 (2006), 한국토목섬유학회
- 이강일, "지반환경 진동의 저감효과에 영향을 미치는 매개변수 연구", 대한토목학회 논문집C, 23(5C), pp.299~307 (2003), 대한토목학회
- 조상호, "방진공에 의한 발파진동차단효과의 실험 및 수치해석적 연구", 한국암반공학회지, 10(4), pp.481~485 (2000)
- 허영, "방진벽에 의한 진동 환경 개선 연구", 한국지진공학회지, 4(4), pp.63~71 (2000)
- 홍웅기, "실측 파형과 수치 파형에 의한 진동주응력 비교", 환경영향평가, 21(5), pp.609~615 (2012), 한국환경영향평가학회
- Haupt, W. A., "Isolation of vibrations by concrete core walls", International Conference of the Soil Mechanics and Foundations Engineering, in processing, 9, pp.251~256 (1977)
- Newmark, N. M., "A method of computation for structural dynamics", Journal of the Engineering Mechanics Division, 85, pp.67~94 (1959)
- Wood, R. D., "Screening of surface waves in soils", Journal of the Soli Mechanics and Foundations Division, 94, pp.951~979 (1968)
- Zaman, M. M., "Interface model for dynamic soil-structure interaction", Journal of Geotechnical Engineering, 110, pp.1257~1273 (1984)