Rate Expression of Fischer-Tropsch Synthesis Over Co-Mn Nanocatalyst by Response Surface Methodology (RSM)
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The effect of operating conditions (temperature and the partial pressures of H2 and CO) on the reaction rate of Fischer-Tropsch synthesis (FTS) were investigated by carrying out experiments according to a Box-Behnken design (BBD), and were mathematically modeled by using response surface methodology (RSM). The catalyst used was a nano-structured cobalt/manganese oxide catalyst, which was prepared by thermal decomposition. The rate of synthesis was measured in a fixed-bed micro reactor with H2/CO molar feed ratio of 0.32-3.11 and reactor pressure in the range of 3-9.33 bar at space velocity of 3600 h-1 and a temperature range of 463.15-503.15 K, under differential conditions (CO conversion below 2%). The results indicated that in the present experimental setup, the temperature and the partial pressure of CO were the most significant variables affecting reaction rate. Based on statistical analysis the quadratic model of reaction rate of FTS was highly significant as p-value 0.0002.
Abstract
The effect of operating conditions (temperature and the partial pressures of H2 and CO) on the reaction rate of Fischer-Tropsch synthesis (FTS) were investigated by carrying out experiments according to a Box-Behnken design (BBD), and were mathematically modeled by using response surface methodology (RSM). The catalyst used was a nano-structured cobalt/manganese oxide catalyst, which was prepared by thermal decomposition. The rate of synthesis was measured in a fixed-bed micro reactor with H2/CO molar feed ratio of 0.32-3.11 and reactor pressure in the range of 3-9.33 bar at space velocity of 3600 h-1 and a temperature range of 463.15-503.15 K, under differential conditions (CO conversion below 2%). The results indicated that in the present experimental setup, the temperature and the partial pressure of CO were the most significant variables affecting reaction rate. Based on statistical analysis the quadratic model of reaction rate of FTS was highly significant as p-value 0.0002.
참고문헌 (29)
- Mansouri, M., , Int. J. Ind. Chem, 4, pp.1~ (2013)
- Tihay, F., , Catal. Today, 58, pp.263~ (2000)
- Barrault, J., , Appl. Catal. A: General, 5, pp.119~ (1983)
- Barrault, J., , Reac. Kinet. Catal. Lett, 17, pp.373~ (1981)
- Mirzaei, A. A., , Appl. Catal. A: General, 306, pp.98~ (2006)
- Narges Keshavarz Jafarzadeh, "Statistical optimization of process conditions for photocatalytic degradation of phenol with immobilization of nano TiO_2 on perlite granules", The Korean Journal of Chemical Engineering, 28(2), pp.531~538 (2011), 한국화학공학회
- Malleswara, T. V., , J. Catal, 258, pp.324~ (2007)
- Elavarasan, P., , Chem. Eng. J, 155, pp.355~ (2009)
- R. Mafi Gholami, "Process optimization and modeling of heavy metals extraction from a molybdenum rich spent catalyst by Aspergillus niger using response surface methodology", Journal of Industrial and Engineering Chemistry, 18(1), pp.218~224 (2012), 한국공업화학회
- Calemma, V., , Catal. Today, 106, pp.282~ (2005)
- Farias, F. E. M., , J. Nat. Gas Chem, 17, pp.175~ (2008)
- Shahrezaei, F., , Powder Technol, 221, pp.203~ (2012)
- Shafeeyan, M. S., , Fuel, 94, pp.465~ (2012)
- Monyanon, S., , Fuel Process. Technol, 96, pp.160~ (2012)
- Hariharan, N. M., , J. Hydrodynamics, 25, pp.72~ (2013)
- García-Vargas, J. M., , Int. J. Hydrogen Energy, 38, pp.4524~ (2013)
- Hossein Atashi, "Kinetics studies of nano-structured cobalt–manganese oxide catalysts in Fischer–Tropsch synthesis", Journal of Industrial and Engineering Chemistry, 19(4), pp.1177~1183 (2013), 한국공업화학회
- Montgomery, D. C., "Design and Analysis of Experiments, 5th ed." (2001), John Wiley & Sons
- Myers, R. H., "Response Surface Methodology: Process and Product Optimization Using Designed Experiments, 2nd ed." (2002), John Wiley & Sons
- Gribval-Constant, A., , Stud. Surf. Sci. Catal, 144, pp.609~ (2002)
- H. Atashi, "Kinetic study of Fischer–Tropsch process on titania-supported cobalt–manganese catalyst", Journal of Industrial and Engineering Chemistry, 16(6), pp.952~961 (2010), 한국공업화학회
- Ali Akbar Mirzaei, "Modeling and operating conditions optimization of Fischer–Tropsch synthesis in a fixed-bed reactor", Journal of Industrial and Engineering Chemistry, 18(4), pp.1515~1521 (2012), 한국공업화학회
- Farhad Fazlollahi, "Development of a kinetic model for Fischer–Tropsch synthesis over Co", Ni, Journal of Industrial and Engineering Chemistry, pp.2012, 18(4)[DOI]
- Yates, I. C., , Energy Fuels, 5, pp.168~ (1991)
- van Steen, E., , Appl. Catal. A: General, 186, pp.309~ (1999)
- Ngwenya, T., , Ind. Eng. Chem. Res, 44, pp.5987~ (2005)
- Rautavuoma, A., , Appl. Catal, 1, pp.247~ (1981)
- Malek Abbaslou, R. M., , Fuel Process. Tech, 90, pp.849~ (2009)
- Liu, Y., , J. Mol. Catal. A: Chem, 272, pp.182~ (2007)