The Development of New Cost-Effective Optimization Technology for OLED Market Entry
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Purpose - This study aims to improve the distribution structure of the OLED market and develop cost-effective optimization techniques. Specifically, it is a study on the optimization of ferric chloride to improve the etch of SUS MASK for OLED. Research design, data, and methodology - Applying the optimal conditions of the experiment, the final confirmation was evaluated for improvement by the Process Capability Index (Cpk). It is possible to derive social performance such as improvement of precision of SUS MASK manufacturing, economic performance such as defect rate, reduction of waste generation and treatment cost, technological achievement such as SUS MASK production technology, improvement of profit structure of technology development and process improvement do. Results - The improvement of the Cpk before the improvement was made was confirmed to be 0.57% with a defect estimate of 25.07% with a failure estimate of 0.57% after the improvement, and 8.84% with a failure estimate of 0.57% level after the improvement. Conclusions - If the conclusions obtained from the specimen experiment are applied to the manufacturing process of SUS MASK, it will be possible to expect excellent cost-effective competitiveness due to the improvement of precision and reduction of defect rate to enhance the OLED market penetration.
Abstract
Purpose - This study aims to improve the distribution structure of the OLED market and develop cost-effective optimization techniques. Specifically, it is a study on the optimization of ferric chloride to improve the etch of SUS MASK for OLED. Research design, data, and methodology - Applying the optimal conditions of the experiment, the final confirmation was evaluated for improvement by the Process Capability Index (Cpk). It is possible to derive social performance such as improvement of precision of SUS MASK manufacturing, economic performance such as defect rate, reduction of waste generation and treatment cost, technological achievement such as SUS MASK production technology, improvement of profit structure of technology development and process improvement do. Results - The improvement of the Cpk before the improvement was made was confirmed to be 0.57% with a defect estimate of 25.07% with a failure estimate of 0.57% after the improvement, and 8.84% with a failure estimate of 0.57% level after the improvement. Conclusions - If the conclusions obtained from the specimen experiment are applied to the manufacturing process of SUS MASK, it will be possible to expect excellent cost-effective competitiveness due to the improvement of precision and reduction of defect rate to enhance the OLED market penetration.
참고문헌 (33)
- Ahn, J. H., "Principles of Photolithography", Physics and High Technology, 20(2), pp.1~8 (2011)
- Belyaev, V. V., "The conduct of organic compounds applied to information display devices", Procedia Computer Science, 103, pp.75~81 (2017)
- Bizzarri, C., "Sustainable metal complexes for organic light-emitting diodes(OLEDs)", Coordination Chemistry Reviews, 373(15), pp.49~82 (2018)
- Chen, Y. C., "Fabrication of Light Extraction Efficiency of Organic Light-Emitting Diodes with 3D Aspherical Microlens by Using Dry Etching Process", Journal of Nanomaterials, 7, pp.1~6 (2013)
- 정광호, "방사선치료에서의 품질보증을 위한 통계적공정관리의 활용", 의학물리, 26(2), pp.059~071 (2015), 한국의학물리학회[DOI]
- Cho, Y. H., "OLED TV technology forecasting using technology mining and the Fisher-Pry diffusion model", Foresight, 18(2), pp.117~137 (2016)
- Elp, J. V., "Low-thermal expansion electrostatic chuck materials and clamp mechanisms in vacuum and air", Microelectronic Engineering, 73(74), pp.941~947 (2004)
- Eritt, M., "OLED manufacturing for large area lighting applications", Thin Solid Films, 518(11), pp.3042~3045 (2010)
- Guedes, A. F., "New Optoelectronic Technology Simplified for Organic Light Emitting Diode (OLED)", Journal of Systemics, Cybernetics and Informatics, 12(3), pp.72~74 (2014)
- Heravi, M. M., "Fe(ClO4)3· 6H2O : A mild and efficient catalyst for one-pot three component synthesis of β-acetamido carbonyl compounds under solvent-free conditions", Molecular Diversity, 13(3), pp.375~378 (2009)
- 허준연, "Laser Micromachining of Permalloy for Fine Metal Mask", International Journal of Precision Engineering and Manufacturing-Green Technology, 2(3), pp.225~230 (2015), 한국정밀공학회[DOI]
- 정민재, "A Study on Cost-effective Treatment of Wastewater and Odor Reduction for Southeast Asian Market Entry", 산경연구논집, 9(12), pp.23~29 (2018), 한국유통과학회
- Khaoula, B., "Electrical Characteristics of Organic Light Emitting Diode(OLED)Finite Difference Modeling", Journal of New Technology and Materials, 4(1), pp.35~38 (2014)
- 김동환, "AHP기법을 이용한 농식품 유통법인 경영진단지표 개발", 유통과학연구, 15(12), pp.95~102 (2017), 한국유통과학회[DOI]
- 김규만, "국부증착용 마이크로 샤도우 마스크 제작", 한국정밀공학회지, 21(8), pp.152~156 (2004), 한국정밀공학회
- 김유진, "산업연관표를 활용한 국내 OLED 조명산업의 경제적 파급효과 및 연관효과에 관한 연구", 산업경제연구, 24(4), pp.2225~2246 (2011), 한국산업경제학회
- Kuma, H., "Blue fluorescent OLED materials and their application for high-performance devices", Science and technology of advanced materials, 15(3), pp.34~42 (2014)
- 이형민, "염화제이철 수용액에 의한 스테인레스 강판의 식각에 관한 연구", Korean Chemical Engineering Research(HWAHAK KONGHAK), 50(2), pp.211~216 (2012), 한국화학공학회
- 이희관, "Selective Etching of Thick Si3N4, SiO2 and Si by Using CF4", O2 and C2F6 Gases with or without O2 or Ar Addition, 2009, pp.54(5), 1816~1823[DOI]
- 이상훈, "인쇄회로기판 폐에칭액으로부터 회수된 염화구리를 이용한 수산화나트륨 용액에서의 산화제1동 분말 제조", 한국자원공학회지, 55(3), pp.194~199 (2018), 한국자원공학회
- Mai, T. A., "Manufacturing of 4th Generation OLED Masks with the Laser MicroJet®Technology", Society for Information Display, 38(1), pp.1596~1598 (2007)
- Mijangos, L., "Ocurrence of emerging pollutants in estuaries of the Basque Country: Analysis of sources and distribution, and assessment of the environmental risk", Water Research, 147(15), pp.152~163 (2018)
- Moscony, J. J., "Optimization of the ferric chloride etching of shadow masks", Journal of the society for the information society, 4(4), pp.231~239 (1996)
- O’Regan, M., "Reducing AMOLED Manufacturing Costs, Korean Information Display Society", International Meeting on Information Display, pp.27~29 (2008)
- Taydakov, I. V., "Effective electroluminescent materials for OLED applications based on lanthanide 1. 3-diketonates bearing pyrazole moiety", Journal of Luminescence, 177, pp.31~39 (2016)
- Tseng, F. M., "Assessing market penetration combining scenario analysis, Delphi, and the technological substitution model : The case of the OLED TV market", Technological Forecasting and Social Change, 76(7), pp.897~909 (2009)
- Wang, Y., "High-performance red organic light-emitting diodes with ultrathin Cu film as anodes", Organic Electronics, 68, pp.218~220 (2019)
- Williams, S. G., "Advanced materials are essential to unlocking new LED and OLED devices", ECN, ~ (2015)
- Wu, C. W., "An overview of theory and practice on process capability indices for quality assurance", International Journal of Production Economics, 117(2), pp.338~359 (2009)
- Xiong, Y., "Performance analysis of multi-primary color display based on OLEDs", PLEDs, 2017, pp.398, 49~55
- Xu, Y., "Current Status and Future Perspective of Recycling Copper by Hydrometallurgy from Waste Printed Circuit Boards", Procedia Environmental Sciences, 31, pp.162~170 (2016)
- Ming-Lai Zhang, "A Study of the Impacts on Electronic Distribution Industry after Korea-China FTA", 산경연구논집, 8(6), pp.33~40 (2017), 한국유통과학회
- Zyczkowska, K., "New Materialitytowards ‘Media Environments’", Procedia Engineering, 161, pp.1275~1281 (2016)