Comparison of shear bond strength of orthodontic brackets using various zirconia primers
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Objective: The aim of this study was to compare the shear bond strength (SBS) of orthodontic brackets bonded to zirconia surfaces using three different zirconia primers and one silane primer, and subjected to thermocycling.Methods: We designed 10 experimental groups following the surface treatment and thermocycling. The surface was treated with one of the following method: no-primer (NP), Porcelain Conditioner (PC), Z-PRIME Plus (ZP), Monobond Plus (MP) and Zirconia Liner Premium (ZL) (n=20). Then each group was subdivided to non-thermocycled and thermocycled groups (NPT, PC, ZPT, MPT, ZLT) (n=10). Orthodontic brackets were bonded to the specimens using TransbondTM XT Pasteand light cured for 15 s at 1,100 mW/cm2. The SBS was measured at a 1 mm/ min crosshead speed. The failure mode was assessed by examination with a stereomicroscope and the amount of bonding resin remaining on the zirconia surface was scored using the modified adhesive remnant index (ARI). Results: The SBS of all experimental groups decreased after thermocycling. Before thermocycling,the SBS was ZL, ZP ≥ MP ≥ PC > NP but after thermocycling, the SBS was ZLT ≥ MPT ≥ ZPT > PCT = NPT (p > 0.05). For the ARI score, both of the groups lacking primer (NP and NPT) displayed adhesive failure modes, but the groups with zirconia primers (ZP, ZPT, MP, MPT, ZL, and ZLT) were associated with mixed failure modes. Conclusions: Surface treatment with a zirconia primer increases the SBS relative to no-primer or silane primer application between orthodontic brackets and zirconia prostheses. [Korean J Orthod 2015;45(4):164-170]
Abstract
Objective: The aim of this study was to compare the shear bond strength (SBS) of orthodontic brackets bonded to zirconia surfaces using three different zirconia primers and one silane primer, and subjected to thermocycling.Methods: We designed 10 experimental groups following the surface treatment and thermocycling. The surface was treated with one of the following method: no-primer (NP), Porcelain Conditioner (PC), Z-PRIME Plus (ZP), Monobond Plus (MP) and Zirconia Liner Premium (ZL) (n=20). Then each group was subdivided to non-thermocycled and thermocycled groups (NPT, PC, ZPT, MPT, ZLT) (n=10). Orthodontic brackets were bonded to the specimens using TransbondTM XT Pasteand light cured for 15 s at 1,100 mW/cm2. The SBS was measured at a 1 mm/ min crosshead speed. The failure mode was assessed by examination with a stereomicroscope and the amount of bonding resin remaining on the zirconia surface was scored using the modified adhesive remnant index (ARI). Results: The SBS of all experimental groups decreased after thermocycling. Before thermocycling,the SBS was ZL, ZP ≥ MP ≥ PC > NP but after thermocycling, the SBS was ZLT ≥ MPT ≥ ZPT > PCT = NPT (p > 0.05). For the ARI score, both of the groups lacking primer (NP and NPT) displayed adhesive failure modes, but the groups with zirconia primers (ZP, ZPT, MP, MPT, ZL, and ZLT) were associated with mixed failure modes. Conclusions: Surface treatment with a zirconia primer increases the SBS relative to no-primer or silane primer application between orthodontic brackets and zirconia prostheses. [Korean J Orthod 2015;45(4):164-170]
참고문헌 (26)
- Kokich VG, "Guidelines for managing the orthodontic-restorative patient", Semin Orthod, 3, pp.3~20 (1997)
- Wood DP, "Bonding to porcelain and gold", Am J Orthod, 89, pp.194~205 (1986)
- Ortorp A, "A 3-year retrospective and clinical follow-up study of zirconia single crowns performed in a private practice", J Dent, 37, pp.731~736 (2009)
- Raigrodski AJ, "The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study", J Prosthet Dent, 96, pp.237~244 (2006)
- Guess PC, "Monolithic CAD", CAM lithium disilicate versus veneered Y-TZP crowns:comparison of failure modes and reliability after fatigue, 2010, pp.23, 434~442
- Zhang Y, "Chipping resistance of graded zirconia ceramics for dental crowns", J Dent Res, 91, pp.311~315 (2012)
- Miyazaki T, "Current status of zirconia restoration", J Prosthodont Res, 57, pp.236~261 (2013)
- Wolf DM, "Bond strength of composite to etched and sandblasted porcelain", Am J Dent, 6, pp.155~158 (1993)
- Kato H, "Effect of etching and sandblasting on bond strength to sintered porcelain of unfilled resin", J Oral Rehabil, 27, pp.103~110 (2000)
- Kitayama S, "Effect of primer treatment on bonding of resin cements to zirconia ceramic", Dent Mater, 26, pp.426~432 (2010)
- Kern M, "Surface conditioning influences zirconia ceramic bonding", J Dent Res, 88, pp.817~822 (2009)
- Magne P, "New zirconia primer improves bond strength of resin-based cements", Dent Mater, 26, pp.345~352 (2010)
- Atsu SS, "Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin", J Prosthet Dent, 95, pp.430~436 (2006)
- Artun J, "Clinical trials with crystal growth conditioning as an alternative to acid-etch enamel pretreatment", Am J Orthod, 85, pp.333~340 (1984)
- Kern M, "Bonding to zirconia ceramic:adhesion methods and their durability", Dent Mater, 14, pp.64~71 (1998)
- Reynolds I, "A review of direct orthodontic bonding", Br J Orthod, 2, pp.171~178 (1975)
- McCarthy MF, "Mechanical and bond strength properties of light-cured and chemically cured glass ionomer cements", Am J Orthod Dentofacial Orthop, 105, pp.135~141 (1994)
- Chen L, "Bonding of primed zirconia ceramics: evidence of chemical bonding and improved bond strengths", Am J Dent, 25, pp.103~108 (2012)
- Lorenzoni FC, "Evaluation of chemical treatment on zirconia surface with two primer agents and an alkaline solution on bond strength", Oper Dent, 37, pp.625~633 (2012)
- Blatz MB, "Influence of surface treatment and simulated aging on bond strengths of luting agents to zirconia", Quintessence Int, 38, pp.745~753 (2007)
- Blatz MB, "In vitro evaluation of shear bond strengths of resin to denselysintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling", J Prosthet Dent, 91, pp.356~362 (2004)
- Lüthy H, "Effect of thermocycling on bond strength of luting cements to zirconia ceramic", Dent Mater, 22, pp.195~200 (2006)
- Wolfart M, "Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods", Dent Mater, 23, pp.45~50 (2007)
- Koizumi H, "Bonding of resin-based luting cements to zirconia with and without the use of ceramic priming agents", J Adhes Dent, 14, pp.385~392 (2012)
- Souk Min Lee, "A comparative study of frictional force in self-ligating brackets according to the bracket-archwire angulation, bracket material, and wire type", 대한치과교정학회지, 45(1), pp.13~19 (2015), 대한치과교정학회
- Min-Ju Ryu, "Effect of silica coating on bond strength between a gold alloy and metal bracket bonded with chemically cured resin", 대한치과교정학회지, 44(3), pp.105~112 (2014), 대한치과교정학회