CPT column을 이용한 석탄 품위향상 기술 연구

Abstract

Development of commercial technology for expansion in domestic anthracite coal utilization is urgent due to the mass reserves of low grade anthracite in Korea. Therefore, a series of experiments were conducted in this study to resolve this problem using CPT column in order to check the possibility of high-quality production for the fine coal that is impossible to treat by dry separation method. Particle size analysis was conducted for the sample using disk mill and vibro screen, and preliminary experiment was conducted for +100 mesh of the product obtained through this process by batch flotation(Sub-A type). Comparison experiment was conducted for -100 mesh and 100 × 325 mesh by each factor-specific condition applying to CPT Column. The result of CPT column flotation by using the proper reagent confirmed through batch flotation was ash rejection 83.15% and recovery 91.44% under the conditions of pulp density 5%, frother temperature 26°C, Kerosene collector (200mL/ton), Pine oil frother (1L./ton), Lime depressant (3kg/ton), air flow rate (1,400mL/ton) and wash water (300mL/ton).