Mud Handling System 수송라인 내 혼상류 시뮬레이션을 위한 수치해법 개발
Development of Numerical Solver for the Simulation on Multiphase Flow in a Pipeline of Mud Handling System
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In the drilling processes and regarding systems, multiphase flows, where gas, water, oil and discrete solid materials are mixed, frequently and easily observed. To increase the performance and guarantee the safety of the whole system, it is of importance to predict and analyze the characteristics of these complicated flows. In this study, before applying to concerned problems, such as the flows in the mud pipeline and mud gas-liquid separator, two-dimensional numerical simulations for some typical multiphase problems were carried out by newly developed solver. The governing equations were discretized by FVM(Finite Volume Method) for general curvi-linear coordinate systems. THINC-WLIC (Tangent Hyperbola for Interface Capturing-Weighted Line Interface Calculation) scheme was used to capture the air-water interface. For the convection terms of Navier-Stokes equations, the MUSCL(Monotonic Upstream-Centered Scheme for Conservation Laws) with TVD(Total Variation Diminishing) scheme was adopted. Firstly, as a benchmark test, Rayleigh-Taylor instability was simulated. The results by present solver showed reasonably good with those of analytic solutions and by other numerical simulations. Then, bubble rising in a unbounded domain and in a bent pipe were simulated.
Abstract
In the drilling processes and regarding systems, multiphase flows, where gas, water, oil and discrete solid materials are mixed, frequently and easily observed. To increase the performance and guarantee the safety of the whole system, it is of importance to predict and analyze the characteristics of these complicated flows. In this study, before applying to concerned problems, such as the flows in the mud pipeline and mud gas-liquid separator, two-dimensional numerical simulations for some typical multiphase problems were carried out by newly developed solver. The governing equations were discretized by FVM(Finite Volume Method) for general curvi-linear coordinate systems. THINC-WLIC (Tangent Hyperbola for Interface Capturing-Weighted Line Interface Calculation) scheme was used to capture the air-water interface. For the convection terms of Navier-Stokes equations, the MUSCL(Monotonic Upstream-Centered Scheme for Conservation Laws) with TVD(Total Variation Diminishing) scheme was adopted. Firstly, as a benchmark test, Rayleigh-Taylor instability was simulated. The results by present solver showed reasonably good with those of analytic solutions and by other numerical simulations. Then, bubble rising in a unbounded domain and in a bent pipe were simulated.
참고문헌 (19)
- Hirt, C.W., "Volume of Fluid (VOF) Method for the Dynamics of Free Boundaries", Journal of Computational Physics(JCP), 39, pp.201~225 (1981)
- Sussman, M., "A Level Set Approach for Computation Solutions to Incompressible Two-Phase Flow", JCP, 114, pp.272~280 (1994)
- Miyata, H., "Potential Flow of Fluids" (1995), Computational Mechanics Publications
- Takewaki, H., "The Cubic-Interpolated Pseudo Particle (CIP) Method: Application to Nonlinear and Multi-dimensional Hyperbolic Equations", JCP, 70(2), pp.355~372 (1987)
- Jeong, S. M., "Numerical Simulation of Impact Loads Caused by Sloshing in a Rectangular Tank Using Eulerian and Lagrangian Approaches", International Journal of Offshore and Polar Engineering, 24(03), pp.174~180 (2014)
- Yabe, T., "A universal solver for hyperbolic equations by cubic-polynomial interpolation II. Two- and three-dimensional solvers", Computer Physics Communications, 66, pp.233~242 (1991)
- Kim, D., "A Semi- Lagrangian CIP Fluid Solver without Dimensional Splitting", Computer Graphics Forum, 27(2), pp.467~475 (2008)
- Yokoi, K., "Efficient implementation of THINC scheme: a simple and practical smoothed VOF algorithm", Journal of Computational Physics, 226(2), pp.1985~2002 (2007)
- Monaghan, J. J., "An Introduction to SPH", Comput. Phys. Comn., 48, pp.89~96 (1988)
- Koshizuka, S., "Moving-Particle Semi-implicit Method for Fragmentation of Incompressible Fluid", Nucl. Sci. Eng., 123, pp.421~434 (1996)
- Jeong, S. M., "Numerical prediction of oil amount leaked from a damaged tank using two-dimensional moving particle simulation method", Ocean Engineering, 69, pp.70~78 (2013)
- Lee, B. H., "Numerical simulation of impact loads using a particle method", Ocean Engineering, 37, pp.164~173 (2010)
- Harten, A., "High resolution schemes for hyperbolic conservation laws", Journal of computational physics, 49(3), pp.357~393 (1983)
- Van Leer, B., "Towards the ultimate conservative difference scheme. V. A second-order sequel to Godunov's method", Journal of computational Physics, 32(1), pp.101~136 (1979)
- Amsden, A. A., "A simplified MAC technique for incompressible fluid flow calculations", Journal of Computational Physics, 6(2), pp.322~325 (1970)
- Xiao, F., "A simple algebraic interface capturing scheme using hyperbolic tangent function", Int. J. Numer. Meth. Fluids, 48, pp.1023~1040 (2005)
- Liu, J., "A hybrid particle-mesh method for viscous, incompressible, multiphase flows", JCP, 202, pp.65~93 (2005)
- Brackbill, J. U., "A continuum method for modeling surface tension", Journal of computational physics, 100(2), pp.335~354 (1992)
- van Sint Annaland, M., "Numerical simulation of gas bubbles behaviour using a three-dimensional volume of fluid method", Chemical Engineering Science, 60(11), pp.2999~3011 (2005)