건축물 ANC 기술 적용을 위한 가속도센서 민감성에 대한 연구
A Study on the Sensitivity of Acceleration Sensors for the Application of ANC Technology in Building
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The purpose of this study is to analyze the measurement sensitivity of an acceleration sensor for active noise canceling (ANC) technology. Two-story buildings were designed and the measurement sensitivity of three sensors was analyzed and compared. To investigate the measurement sensitivity of the sensor under the same environment, three sensors were installed at different positions of 0, 0.5, and 1 m, respectively, from the noise source. As a result, the sensor sensitivity of measurement was high when they were placed near the noise source, but the sensitivity decreased as the distance from the noise source increased. The measurement sensitivity of sensors between 0.5 and 1 m was almost similar. To evaluate the measurement sensitivity of sensors according to the attachment method, the adhesion method using the tape and bolts were compared. There was no significant change observed according to the attachment method. Therefore, the distance from the noise source and the sensor type had a more significant impact on the measurement sensitivity of the sensor.
Abstract
The purpose of this study is to analyze the measurement sensitivity of an acceleration sensor for active noise canceling (ANC) technology. Two-story buildings were designed and the measurement sensitivity of three sensors was analyzed and compared. To investigate the measurement sensitivity of the sensor under the same environment, three sensors were installed at different positions of 0, 0.5, and 1 m, respectively, from the noise source. As a result, the sensor sensitivity of measurement was high when they were placed near the noise source, but the sensitivity decreased as the distance from the noise source increased. The measurement sensitivity of sensors between 0.5 and 1 m was almost similar. To evaluate the measurement sensitivity of sensors according to the attachment method, the adhesion method using the tape and bolts were compared. There was no significant change observed according to the attachment method. Therefore, the distance from the noise source and the sensor type had a more significant impact on the measurement sensitivity of the sensor.
참고문헌 (8)
- United Nations, Department of Economic and Social Affairs, Population Division, "World Population Prospects 2019: Volume I: Comprehensive Tables", ~ (2019)
- 황재승, "완충재의 동특성에 따른 중량충격음 증폭에 관한 해석적 연구", 한국소음진동공학회논문집, 20(7), pp.651~657 (2010), 한국소음진동공학회
- Kuo, S. M., "Active Noise Control: A Tutorial Review", Proceeding of the IEEE, 87, pp.943~973 (1999)
- Ang, L. Y. S., "The performance of active noise-canceling headphone in different noise environments", Applied Acoustics, 122, pp.16~22 (2017)
- Kim, T. M., "Effect of structural vibration and room acoustic modes on low frequency impact noise in apartment house with floating floor", Applied Acoustics, 142, pp.59~69 (2018)
- 이민정, "거주자의 거동으로 발생하는 바닥진동의 층간 전달 및 바닥충격음의 음압레벨 특성 평가", 한국소음진동공학회논문집, 27(1), pp.5~13 (2017), 한국소음진동공학회[DOI]
- 문대호, "PVC 바닥 마감재와 바닥 매트의 바닥충격음 및 충격력 저감", 한국소음진동공학회논문집, 24(7), pp.501~508 (2014), 한국소음진동공학회[DOI]
- Duhamel, P., "Fast fourier transforms:A tutorial review and a state of the art", Signal Processing, 19, pp.259~299 (1990)