마그네슘합금의 레이저 절단가공 특성에 관한 연구
A Study on the Laser Cutting Characteristics of Magnesium alloys
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Studies on the laser cutting processing characteristics of magnesium alloys can be divided into three parts, comparing the cutting faces of magnesium alloy and aluminum alloy, observing the shape of the corner where straight lines meet, and observing the straight lines and arcs. First, there were no laser cutting conditions for magnesium alloys, so it was observed to cut magnesium alloy and aluminum alloy under the same processing conditions as aluminum alloy to shape and surface of the cut surface. Next, to observe the characteristics of the corner, we observed the shape of the corner according to the angle change of the part where the two lines meet, and finally we observed various angles to observe the characteristics of the part where the arc meets the line. Finally, laser cutting processing characteristics of magnesium alloys and aluminum alloys obtained based on the above study contents were summarized.
Abstract
Studies on the laser cutting processing characteristics of magnesium alloys can be divided into three parts, comparing the cutting faces of magnesium alloy and aluminum alloy, observing the shape of the corner where straight lines meet, and observing the straight lines and arcs. First, there were no laser cutting conditions for magnesium alloys, so it was observed to cut magnesium alloy and aluminum alloy under the same processing conditions as aluminum alloy to shape and surface of the cut surface. Next, to observe the characteristics of the corner, we observed the shape of the corner according to the angle change of the part where the two lines meet, and finally we observed various angles to observe the characteristics of the part where the arc meets the line. Finally, laser cutting processing characteristics of magnesium alloys and aluminum alloys obtained based on the above study contents were summarized.
참고문헌 (18)
- 김경현, "마그네슘합금 압출재 제조 및 특성 평가", 한국철강신문, 27~73
- 김대현, "마그네슘합금 압출재 제조 및 특성 평가", 석사, 재료공학, pp.2006
- 狩野勝吉, "난삭재의 절삭가공기술", pp.236~237 (1989), (주)기술정보
- 김성일, "Al 합금의 레이저 절단 시 절단면에관한 연구", 한국공작기계학회 춘계학술대회 논문집, pp.203~208 (2009)
- 이우람, "파이버 CW레이저절단공정을 이용한 STS304 절단특성에 관한 연구", 한국생산제조시스템학회 추계학술대회 논문집, pp.187~ (2011)
- 안동규, "CW Nd:YGA 레이저를 이용한 Inconel 718 절단시 절단면 형성 고찰", 한국공작기계학회 추계학술대회 논문집, pp.113~118 (2007)
- 7. マグネシウムンン委員會, "95 マグネシウムマニュアル", pp.5~17 (1995), 日本マグネシウム協會
- 여길구, "마그네슘합금의 와이어컷 방전가공시 가공조건에 따른 가공특성에 관한 연구", 한국폴리텍대학 논문집 (2014)
- 길상철, , 월간신기술, 7(6), pp.1~8 (1993)
- 김기범, "현대제조공학 - 재료, 공정, 시스템", pp.726~727 (2003)
- 한국산업인력공단, "전산응용가공", pp.80~84 (1994), 한국산업인력공단
- POSCO, "POSCO magnesium Catalogue", ~ (2013)
- AMADA, "AMADA KOREA HOMEPAGE", ~ (2005)
- 한국과학기술정보원, "고기능 Al, Mg 합금의신제조 공정기술", ~ (2009)
- 김세광, "에코 마그네슘 합금 개발", Machinery Industry, pp.74~78 (2009)
- 경량마그네슘합금에 의한 Notebo ok Case 제조기술 개발연구 보고서, "김경현", 한국기계연구원, ~ (2002)
- 한국마그네슘합금 산업의 현황과 전망, "강민철", 부품소재연구원, ~ (2003)
- 마그네슘합금의 후방산업유치를 위한 전략수립 기술조사 보고서, "손근용", 전남신소재기술산업지원센터, ~ (2004)