본문 바로가기
KERD
논문

스파이럴 볼트 및 록 볼트의 양생조건에 따른 지보 매커니즘에 관한 연구

Support Mechanism of Rock and Spiral bolts by Curing Conditions

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류자원공학

초록

지반침하나 붕괴, 파괴등과 같은 문제들을 해결하기 위해 그라운드 앵커나 케이블 볼트, 록 볼트와 같은 지보재들이 개발되어 사용되고 있다. 본 연구에서는 일반적으로 사용되고 있는 지보재인 록 볼트와 새로운 형태의 지보재인 스파이럴 볼트 사이의 지보효과에 대해 규명하고자 한다. 지보재의 특성을 규명하기 위해 그라우트의 양생조건을 달리하여 실내인발시험을 수행하였고, 하중과 변위, 변형률을 측정하였다. 실내인발시험을 통해 얻어진 data를 이용해 내부압과 구속압, 전단응력을 계산하여 스파이럴 볼트와 록 볼트의 지보 특성에 대해 비교하였다. 양생기간 7일과 28일의 결과는 비슷한 경향을 보였고, 스파이럴 볼트가 록 볼트에 비해 변위가 더 크게 발생하였다. 내부압과 구속압의 경우 스파이럴 볼트에 비해 록 볼트가 더 크게 나타났다.

Abstract

This study presents a Geographic Information Systems (GIS) based decision support system for planning the reforestation at abandoned coal mines. The characteristics of deforested zone due to mine development were analyzed and categorized to define the schema of GIS database. Six criteria (i.e., forest-climate zone, mining method, visibility, managerial condition, slope gradient, reforestation purpose) were considered to classify the deforested zone and to generate an unique code in database. ArcMap, ArcObjects and Visual Basic for Application (VBA) were used to implement the system. The application to the Samcheok coal block in Korea shows that the system could present useful information to select suitable trees for the reforestation and can also provide a cost evaluation tool to effectively support the planning work.

참고문헌 (15)

  1. Bawden, W.P., "An experimental procedure for the in situ testing of cable bolts", International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 29, pp.525~533 (1992)
  2. 김낙경, "점토지반에 설치된 앵커의 하중전이에 관 한 연구", 한국지반공학회지, 16, pp.145~155 (2000)
  3. 김낙경, "인장형 앵커와 압축형 앵커의 하중전이에 관한 연구", 한국지반공학회지, 17, pp.59~68 (2001)
  4. 김래현, "현장시험에 의한 그라운드 앵커 시스템의 크리프 및 단기거동 특성 연구", 대한토목학회 논문집C, 22(6-C), pp.585~594 (2002), 대한토목학회
  5. 박병수, "풍화암에 근입된 그라운드 앵커의 인발거동 연구", 강원대학교 산업기술 연구소 논문집 산업기술연구, 26, pp.109~117 (2006)
  6. Rock Bolt 지보 기술 광산 적용 시험연구, "대한광업진흥공사", 4~12 (1986)
  7. Farmer, W., "Stress distribution along a resin grouted rock anchor", Int. J. of Rock Mech. Min. Sci. & Geomech. Abstr., 12, pp.347~351 (1975)
  8. Hirata, A., "Dilation stress on borehole induced by a spiral anchor", Proceedings of the 3rd International Symposium on Rock Stress, pp.499~505 (2003)
  9. Hirata, A., "Study on the estimation of the axial resistance of spiral bar based on interaction with ground", Journal of the Mining and Materials Processing Institute of Japan, 121, pp.370~377 (2005), MMIJ
  10. Hoek, E., "Underground Excavations in Rock", pp.244~258 (1980), IMM
  11. Hudson J.A., "Rock mechanics principles in engineering practice", pp.40~47 (1989), CIRIA
  12. Hyett, A.J., "The effect of rock mass confinement on the bond strength of fully grouted cable bolts", International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 29, pp.503~524 (1992)
  13. Indraratna, B., "Design for grouted rock bolts based on the convergence control method", International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 27, pp.269~281 (1990)
  14. Kaiser, P.K., "Effect of stress change on the vond strength of fully grouted cables", International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 29, pp.293~306 (1992)
  15. Yazici, S., "Bond strength grouted cable bolts", International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 29, pp.279~292 (1992)

관련 논문AI추천

이 간행물의 다른 논문 (15건)