본문 바로가기
KERD
논문KCI 등재

Development and verification of a Monte Carlo two-step method for lead-based fast reactor neutronics analysis

2

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류원자력공학

초록

With the rise of economic and safety standards for nuclear reactors, new concepts of Gen-IV reactors and modular reactors showed more complex designs that challenge current tools for reactor physics analysis. A Monte Carlo (MC) two-step method was proposed in this work. This calculation scheme uses the continuous-energy MC method to generate multi-group cross-sections from heterogeneous models. The multi-group MC method, which can adapt locally-heterogeneous models, is used in the core calculation step. This calculation scheme is verified using a Gen-IV modular lead-based fast reactor (LFR) benchmark case. The influence of homogenized patterns, scatter approximations, flux separable approximation, and local heterogeneity in core calculation on simulation results are investigated. Results showed that the cross-sections generated using the 3D assembly model with a locally heterogeneous representation of control rods lead to an accurate estimation with less than 270 pcm bias in core reactivity, 0.5% bias in control rod worth, and 1.5% bias on power distribution. The study verified the applicability of multigroup cross-sections generated with the MC method for LFR analysis. The study also proved the feasibility of multi-group MC in core calculation with local heterogeneity, which saves 85% time compared to the continuous-energy MC.

Abstract

With the rise of economic and safety standards for nuclear reactors, new concepts of Gen-IV reactors and modular reactors showed more complex designs that challenge current tools for reactor physics analysis. A Monte Carlo (MC) two-step method was proposed in this work. This calculation scheme uses the continuous-energy MC method to generate multi-group cross-sections from heterogeneous models. The multi-group MC method, which can adapt locally-heterogeneous models, is used in the core calculation step. This calculation scheme is verified using a Gen-IV modular lead-based fast reactor (LFR) benchmark case. The influence of homogenized patterns, scatter approximations, flux separable approximation, and local heterogeneity in core calculation on simulation results are investigated. Results showed that the cross-sections generated using the 3D assembly model with a locally heterogeneous representation of control rods lead to an accurate estimation with less than 270 pcm bias in core reactivity, 0.5% bias in control rod worth, and 1.5% bias on power distribution. The study verified the applicability of multigroup cross-sections generated with the MC method for LFR analysis. The study also proved the feasibility of multi-group MC in core calculation with local heterogeneity, which saves 85% time compared to the continuous-energy MC.

참고문헌 (20)

  1. E. Nikitin, "Solution of the OECD", NEA neutronic SFR benchmark with Serpent-DYN3D and Serpent-PARCS code systems, 2015, pp.75, 492~497[DOI]
  2. Tuan Quoc Tran, "Verification of a two-step code system MCS", RAST-F to fast reactor core analysis, 2022, pp.54(5), 1789~1803[DOI]
  3. Nicolas Martin, "A multiphysics model of the versatile test reactor based on the MOOSE framework", Annals of Nuclear Energy, 172, pp.109066~ (2022), Elsevier BV[DOI]
  4. H. Guo, "Advanced method for neutronic simulation of control rods in sodium fast reactors : numerical and experimental validation", Ann. Nucl. Energy, 129, pp.90~100 (2019)
  5. H. Guo, "Preliminary verification of multigroup cross-sections generation and locally heterogeneous transport calculation using OpenMC with CEFR start-up tests benchmark", Prog. Nucl. Energy, 154 (2022)
  6. Paul K. Romano, "The OpenMC Monte Carlo particle transport code", Annals of Nuclear Energy, 51, pp.274~281 (2013), Elsevier BV[DOI]
  7. A.V. Zrodnikov, "Innovative nuclear technology based on modular multi-purpose lead–bismuth cooled fast reactors", Progress in Nuclear Energy, 50(2-6), pp.170~178 (2008), Elsevier BV[DOI]
  8. A.V. Zrodnikov, "SVBR-100 module-type fast reactor of the IV generation for regional power industry", Journal of Nuclear Materials, 415(3), pp.237~244 (2011), Elsevier BV[DOI]
  9. J.M. Ruggieri, "ERANOS 2.1 : International Code System for GEN IV Fast Reactor Analysis", pp.9~ (2006)
  10. W. Boyd, "Multigroup cross-section generation with the OpenMC Monte Carlo particle transport code", Nucl. Technol, 205, pp.928~944 (2019)[DOI]
  11. A. Nelson, "Improved Convergence Rate of Multi-Group Scattering Moment Tallies for Monte Carlo Neutron Transport Codes", Ph.D., pp.2014
  12. Adam G. Nelson, "The Effect of the Flux Separability Approximation on Multigroup Neutron Transport", Journal of Nuclear Engineering, 2(1), pp.86~96 (2021), MDPI AG[DOI]
  13. A. Hébert, "A Consistent Technique for the Pin-by-Pin Homogenization of a Pressurized Water Reactor Assembly", Nuclear Science and Engineering, 113(3), pp.227~238 (1993), Informa UK Limited[DOI]
  14. A. Hébert, "Development of a third-generation superhomog eneisation method for the homogenization of a pressurized water reactor assembly", Nuclear Science and Engineering, 115(2), pp.129~141 (1993), Informa UK Limited[DOI]
  15. E. Nikitin, "On the use of the SPH method in nodal diffusion analyses of SFR cores", Annals of Nuclear Energy, 85, pp.544~551 (2015), Elsevier BV[DOI]
  16. Tara M. Pandya, "Two-step neutronics calculations with Shift and Griffin for advanced reactor systems", Annals of Nuclear Energy, 173, pp.109131~ (2022), Elsevier BV[DOI]
  17. Vincent Labouré, "Hybrid super homogenization and discontinuity factor method for continuous finite element diffusion", Annals of Nuclear Energy, 128, pp.443~454 (2019), Elsevier BV[DOI]
  18. Ching-Sheng Lin, "An assessment of the applicability of multigroup cross sections generated with Monte Carlo method for fast reactor analysis", Nuclear Engineering and Technology, 52(12), pp.2733~2742 (2020), 한국원자력학회[DOI]
  19. Guo H., "Optimization of reactivity control in a small modular sodium-cooled fast reactor", Nuclear Engineering and Technology, 52(7), pp.1367~1379 (2020), 한국원자력학회[DOI]
  20. "Fast reactor core concepts for minor actinide transmutation using solid moderator" (2011)[URL]

관련 논문AI추천

Multigroup cross-sections generated using Monte-Carlo method with flux-moment homogenization technique for fast reactor analysisFeng Kuaiyuan, Gu Hanyang, Guo Hui, Song Qufei, Vidal Jean-François, Wu Yiwei한국원자력학회 · Nuclear Engineering and Technology2023 · 제55권 제7호Methodology and preliminary verification of generating heterogeneous multigroup microscopic cross-section libraries for neutron transport codes based on OpenMCChen Guohua, Cui Bowen, Jiang Xiaofeng한국원자력학회 · Nuclear Engineering and Technology2025 · 제57권 제8호Performance analysis of a two-step calculation procedure based on Monte Carlo and pin-wise diffusion methods for PWR core design권성준, 윤주일, 임창현한국원자력학회 · Nuclear Engineering and Technology2025 · 제57권 제8호Neutronics modelling of control rod compensation operation in small modular fast reactor using OpenMCHanyang Gu, Hui Guo, Kuaiyuan Feng, Xingjie Peng, Xin Jin, Yiwei Wu한국원자력학회 · Nuclear Engineering and Technology2022 · 제54권 제3호Improving tally efficiency and accuracy of multi-group scattering matrix calculations in the Monte Carlo code NECP-MCXCao Liangzhi, He Qingming, Li Yunzhao, Qin Shuai, Shi Jinkang, Wu Hongchun한국원자력학회 · Nuclear Engineering and Technology2024 · 제56권 제12호Homogenized cross-section generation for pebble-bed type high-temperature gas-cooled reactor using NECP-MCXCao Liangzhi, He Qingming, Li Yunzhao, Qin Shuai, Wang Yongping, Wu Hongchun, Wu Yuxuan한국원자력학회 · Nuclear Engineering and Technology2023 · 제55권 제9호

이 간행물의 다른 논문 (39건)