본문 바로가기
KERD
논문KCI 등재

Neutron-irradiated effect on the thermoelectric properties of Bi2Te3-based thermoelectric leg

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류원자력공학

초록

Thermoelectric (TE) materials working in radioisotope thermoelectric generators are irradiated by neutrons throughout its service; thus, investigating the neutron irradiation stability of TE devices is necessary. Herein, the influence of neutron irradiation with fluences of 4.56  1010 and 1  1013 n/cm2 by pulsed neutron reactor on the electrical and thermal transport properties of n-type Bi2Te2.7Se0.3 and ptype Bi0.5Sb1.5Te3 thermoelectric alloys prepared by cold-pressing and molding is investigated. After neutron irradiation, the properties of thermoelectric materials fluctuate, which is related to the material type and irradiation fluence. Different from p-type thermoelectric materials, neutron irradiation has a positive effect on n-type Bi2Te2.7Se0.3 materials. This result might be due to the increase of carrier mobility and the optimization of electrical conductivity. Afterward, the effects of p-type and n-type TE devices with different treatments on the output performance of TE devices are further discussed. The positive and negative effects caused by irradiation can cancel each other to a certain extent. For TE devices paired with p-type Bi0.5Sb1.5Te3 and n-type Bi2Te2.7Se0.3 thermoelectric legs, the generated power and conversion efficiency are stable after neutron irradiation.

Abstract

Thermoelectric (TE) materials working in radioisotope thermoelectric generators are irradiated by neutrons throughout its service; thus, investigating the neutron irradiation stability of TE devices is necessary. Herein, the influence of neutron irradiation with fluences of 4.56  1010 and 1  1013 n/cm2 by pulsed neutron reactor on the electrical and thermal transport properties of n-type Bi2Te2.7Se0.3 and ptype Bi0.5Sb1.5Te3 thermoelectric alloys prepared by cold-pressing and molding is investigated. After neutron irradiation, the properties of thermoelectric materials fluctuate, which is related to the material type and irradiation fluence. Different from p-type thermoelectric materials, neutron irradiation has a positive effect on n-type Bi2Te2.7Se0.3 materials. This result might be due to the increase of carrier mobility and the optimization of electrical conductivity. Afterward, the effects of p-type and n-type TE devices with different treatments on the output performance of TE devices are further discussed. The positive and negative effects caused by irradiation can cancel each other to a certain extent. For TE devices paired with p-type Bi0.5Sb1.5Te3 and n-type Bi2Te2.7Se0.3 thermoelectric legs, the generated power and conversion efficiency are stable after neutron irradiation.

참고문헌 (41)

  1. Y. Xing, "A device-to-material strategy guiding the"doublehigh"thermoelectric module", Joule, 4(11), pp.2475~2483 (2020)
  2. G. Wang, "The effect of temperature changes on electrical performance of the betavoltaic cell", Appl. Radiat. Isot, 68(12), pp.2214~2217 (2010)
  3. H. Williams, "A conceptual spacecraft radioisotope thermoelectric and heating unit(RTHU)", Int. J. Energy Res, 36(12), pp.1192~1200 (2012)
  4. A Chmielewski, "RTGs for space exploration at the end of the 20th century", Proceedings of the 24th Intersociety Energy Conversion Engineering Conference, pp.715~720 (1989)
  5. S. A. Whalen, "Improving power density and efficiency of miniature radioisotopic thermoelectric generators", J. Power Sources, 180(1), pp.657~663 (2008)
  6. Yugao Ma, "Coupled irradiation-thermal-mechanical analysis of the solid-state core in a heat pipe cooled reactor", Nuclear Engineering and Technology, 54(6), pp.2094~2106 (2022), 한국원자력학회[DOI]
  7. I. L. A. Daryush, "Thermoelectric systems : ion beam enhanced thermoelectric properties", Appl. Surf. Sci, 310, pp.217~220 (2014)
  8. N. Kempf, "Proton irradiation effect on thermoelectric properties of nanostructured n-type half-Heusler Hf0. 25Zr0. 75NiSn0. 99Sb0. 01", Appl. Phys. Lett, 112, pp.243902~ (2018)
  9. J. W. Vandersande, "Effect of neutron irradiation on the thermoelectric properties of SiGe alloys", Solid State Phys, 2, pp.392~396 (1990)
  10. P. Ballo, "Thermoelectrical parameters of fast neutron irradiated GeSi alloys", Phys. Status Solidi, 150(2), pp.687~693 (2010)
  11. H. Wang, "Effect of high fluence neutron irradiation on transport properties of thermoelectrics", Appl. Phys. Lett, 111(4), pp.49301~ (2017)
  12. L. V. Gorynin, "Effects of neutron irradiation on properties of refractory metals", J. Nucl. Mater, 191, pp.421~425 (1992)
  13. S. A. Fabritsiev, "Effects of neutron irradiation on physical and mechanical properties of Mo-Re alloys", J. Nucl. Mater, 191, pp.426~429 (1992)
  14. T. Koyanagi, "Neutron-irradiation creep of silicon carbide materials beyond the initial transient", J. Nucl. Mater, 478, pp.97~111 (2016)
  15. E. Huseynov, "Effects of neutron flux, frequency and temperature on the dielectric loss of nano SiO2 particles", Silicon, 10(2), pp.191~196 (2018)
  16. E. Huseynov, "Temperature vs. impedance dependencies of neutron-irradiated nanocrystalline silicon carbide(3C-SiC)", Appl. Phys. A, 125, pp.91~98 (2019)
  17. E. Huseynov, "Temperature and frequency dependence of electric conductivity in nano-grained SiO2 exposed to neutron irradiation", Physica B, 450, pp.77~83 (2014)
  18. L. L. Snead, "Handbook of SiC properties for fuel performance modeling", J. Nucl. Mater, 371, pp.329~377 (2007)
  19. V. Barabash, "Neutron irradiation effects on plasma facing materials", J. Nucl. Mater, 283, pp.138~146 (2000)
  20. L. L. Snead, "Limits on irradiation-induced thermal conductivity and electrical resistivity in silicon carbide materials", J. Nucl. Mater, 329, pp.524~529 (2004)
  21. E. M. Huseynov, "Electrical impedance spectroscopy of neutron-irradiated nanocrystalline silicon carbide(3C-SiC)", Appl. Phys. A, 124, pp.19~ (2018)
  22. E. M. Huseynov, "Dielectric loss of neutron-irradiated nanocrystalline silicon carbide(3C-SiC)as a function of frequency and temperature", Solid State Sci, 84, pp.44~50 (2018)
  23. E. M. Huseynov, "Neutron irradiation and frequency effects on the electrical conductivity of nanocrystalline silicon carbide(3C-SiC)", Phys. Lett, 380(38), pp.3086~3091 (2016)
  24. C. Wang, "The impact of reactor neutron irradiation on total ionizing dose degradation in MOSFET", Nucl. Instrum. Methods Phys. Res. Sect. A Accel. Spectrom. Detect. Assoc. Equip, 924(21), pp.245~249 (2019)
  25. K. Liu, "Enhancing the performance of fully-scaled structure-adjustable 3D thermoelectric devices based on coldepress sintering and molding", Energy, 206, pp.118096~ (2020)
  26. M. Maksymuk, "Development of the high performance thermoelectric unicouple based on Bi2Te3 compounds", J. Power Sources, 530, pp.231301~ (2022)
  27. G. J. Snyder, "Complex thermoelectric materials", Nat. Mater, 7, pp.105~114 (2008)
  28. M. S. Dresselhaus, "New directions for lowedimensional thermoelectric materials", Adv. Mater, 19(8), pp.1043~1053 (2007)
  29. Z. Lin, "The cross-interface energy-filtering effect at organic", inorganic interfaces balances the tradeoff between thermopower and conductivity, 2022, pp.14, 9419~
  30. M. Bala, "Formation of nanodots and enhancement of thermoelectric power induced by ion irradiation in PbTe : Ag composite thin films", Nucl. Instrum. Methods Phys. Res. B, 379, pp.36~41 (2016)
  31. F. Zhang, "The roles of grain boundaries in thermoelectric transports", Materials Lab, 1(1), pp.220012~ (2022)
  32. C. Uher, "Transport properties of pure and doped MniSn (M= Zr, Hf)", Phys. Rev. B, 59(13), pp.8615~8621 (1999)
  33. Y. Li, "Response of p-type and n-type Half-Heusler thermoelectric materials to fast neutron irradiation", Nucl. Instrum. Methods Phys. Res. Sect. B Beam Interact. Mater. Atoms, 479, pp.55~67 (2020)
  34. C. Hu, "Carrier grain boundary scattering in thermoelectric materials", Energy Environ. Sci, 15, pp.1406~ (2022)
  35. C.M. Barr, "Irradiation-induced grain boundary facet motion: in situ observations and atomic-scale mechanisms", Sci. Adv, 8(23), pp.eabn0900~ (2022)
  36. X. Zheng, "Impact of grain sizes on phonon thermal conductivity of bulk thermoelectric materials", Appl. Phys. Lett, 87, pp.242101~ (2005)
  37. E. Macía, "Effect of mechanical alloying on the microstructural evolution of a ferritic ODS steel with (Y – Ti – Al – Zr) addition processed by Spark Plasma Sintering (SPS)", Nuclear Engineering and Technology, 53(8), pp.2582~2590 (2021), 한국원자력학회[DOI]
  38. E.K. Papynov, "SrAl 2 Si 2 O 8 ceramic matrices for 90 Sr immobilization obtained via spark plasma sintering-reactive synthesis", Nuclear Engineering and Technology, 53(7), pp.2289~2294 (2021), 한국원자력학회[DOI]
  39. C. Tang, "Preparation and thermoelectric properties of Cu1. 8S", CuSbS2 composites, 2019, pp.8, 209~217
  40. 안정수, "Fabrication and thermal conductivity of CeO 2 – Ce 3 Si 2 composite", Nuclear Engineering and Technology, 53(2), pp.583~591 (2021), 한국원자력학회[DOI]
  41. K. Park, "Lossless hybridization between photovoltaic and thermoelectric devices", Sci. Rep, 3, pp.2123~ (2013)

관련 논문AI추천

Investigation of Ball Size Effect on Microstructure and Thermoelectric Properties of p-type BiSbTe by Mechanical Alloying메이리카린, Chul-Hee Lee, MADAVALIBABU, Sang-min Yoon, Soon-Jik Hong한국분말재료학회 · 한국분말재료학회지2016 · 제23권 제2호Exploring Thermoelectric Transport Properties and Band Parameters of n-Type Bi2-xSbxTe3 Compounds Using the Single Parabolic Band Model김경태, 박종민, 배진희, 손인준, 정수호, 조승기, Linh Ba Vu한국분말재료학회 · 한국분말재료학회지2024 · 제31권 제2호Investigation of Spark Plasma Sintering Temperature on Microstructure and Thermoelectric Properties of p-type Bi-Sb-Te alloys신동원, 한진구, 홍순직, MADAVALIBABU한국분말재료학회 · 한국분말재료학회지2017 · 제24권 제2호Influence of milling atmosphere on thermoelectric properties of p-type Bi-Sb-Te based alloys by mechanical alloying신동원, 윤석민, 이갑호, 이철희, 홍순직, CHEENEPALLI NAGARJUNA, MADAVALIBABU한국분말재료학회 · 한국분말재료학회지2017 · 제24권 제5호Aerosol deposition of thermoelectric p-type Bi0.5Sb1.5Te3 and n-type Bi2Te2.7Se0.3 thick films김정훈, Jaewoo Lee, Min Hwan Kwak, Seung Beom Kang, Seung Eon Moon, Seung-Min Lee, Won Jeong Kim청정에너지연구소 · Journal of Ceramic Processing Research2017 · 제18권 제10호열간등방가압 공정을 통한 P형 Bi0.5Sb1.5Te3.0 소결체의 격자 열전도도 감소 및 열전 특성 향상김경태, 우예진, 정수호, 조승기한국분말재료학회 · 한국분말재료학회지2023 · 제30권 제2호

이 간행물의 다른 논문 (39건)