Electrochemical corrosion behavior of atmospheric-plasma-sprayed copper as a coating material for deep geological disposal canisters
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Cu, which exhibits excellent corrosion resistance in underground environments, has been investigated as a canister material for use in the deep geological disposal of spent nuclear fuels. In this study, the technical viability of atmospheric plasma spraying for producing Cu-coated canisters was investigated. A high-purity Cu film (millimeter scale) was deposited onto a stainless-steel substrate using a plasma gun with a shroud structure. Potentiodynamic polarization studies revealed that the Cu film exhibited a sufficiently low corrosion rate in the groundwater electrolyte. In addition, no pitting corrosion was observed on the Cu film surface after accelerated corrosion studies. A prototype cylindrical Cu film was fabricated on a 1/20 scale on a stainless-steel tube to demonstrate the scalability of atmospheric plasma spraying in producing Cu-coated canisters
Abstract
Cu, which exhibits excellent corrosion resistance in underground environments, has been investigated as a canister material for use in the deep geological disposal of spent nuclear fuels. In this study, the technical viability of atmospheric plasma spraying for producing Cu-coated canisters was investigated. A high-purity Cu film (millimeter scale) was deposited onto a stainless-steel substrate using a plasma gun with a shroud structure. Potentiodynamic polarization studies revealed that the Cu film exhibited a sufficiently low corrosion rate in the groundwater electrolyte. In addition, no pitting corrosion was observed on the Cu film surface after accelerated corrosion studies. A prototype cylindrical Cu film was fabricated on a 1/20 scale on a stainless-steel tube to demonstrate the scalability of atmospheric plasma spraying in producing Cu-coated canisters
참고문헌 (19)
- R. C. Ewing, "Long-term storage of spent nuclear fuel", Nat. Mater, 14, pp.252~257 (2015)
- M. Alwaeli, "Investigation into the current state of nuclear energy and nuclear waste management–a state-of-art review", Energy, 15, pp.4275~ (2022)
- D. G. Bennett, "Overview of European concepts for high-level waste and spent fuel disposal with special reference waste container corrosion", J. Nucl. Mater, 379, pp.1~8 (2008)
- M. Buser, "Deep geological radioactive and chemical waste disposal: where we stand and where we go", ATW, Int. J. Nucl. Power, 65, pp.311~316 (2020)
- 이종열, "Proposal of an Improved Concept Design for the Deep Geological Disposal System of Spent Nuclear Fuel in Korea", Journal of Nuclear Fuel Cycle and Waste Technology, 18, pp.1~19 (2020), 한국방사성폐기물학회[DOI]
- F. King, "Progress in the understanding of the long-term corrosion behaviour of copper canisters", J. Nucl. Mater, 438, pp.228~237 (2013)
- F. King, "Localised Corrosion of Copper Canisters in Bentonite Pore Water", pp.13~27 (2013), Svensk K¨arnbr¨anslehantering AB
- F. King, "Comprehensive Nuclear Materials", pp.421~450 (2011), Elsevier
- Production Methods and Costs of Oxygen Free Copper Canisters for Nuclear Waste Disposal, "H. Aalto", Posiva Oy, ~, pp.POSIVA-96-08 (1996)
- Design, Production and Initial State of the Canister, "C. Lars", Svensk K¨arnbr¨anslehentering AB, ~, pp.SKB-TR-10-14 (2010)
- C. H. Boyle, "Mechanical performance of integrally bonded copper coatings for the long term disposal of used nuclear fuel", Nucl. Eng. Des, 293, pp.403~412 (2015)
- D. S. Hall, "An evaluation of corrosion processes affecting copper-coated nuclear waste containers in a deep geological repository", Prog. Mater. Sci, 118, pp.100766~ (2021)
- 이민수, "APPLICATION OF COLD SPRAY COATING TECHNIQUE TO AN UNDERGROUND DISPOSAL COPPER CANISTER AND ITS CORROSION PROPERTIES", Nuclear Engineering and Technology, 43(6), pp.557~566 (2011), 한국원자력학회
- Development of Fabrication Technology for Copper Canisters with Cast Inserts, "C. -G. Andersson", Svensk K¨arnbr¨anslehentering AB, 20253793~ (2002)
- S. T. Auwal, "A review on laser beam welding of copper alloys", Int. J. Adv. Manuf. Technol, 69, pp.475~490 (2018)
- R. Unabia, "Current progress in solution precursor plasma spraying of cermets : a review", Metals, 8, pp.420~ (2018)
- S. Lee, "Plasma etching behavior of YOF coating deposited by suspension plasma spraying in inductively coupled CHF3", Ar plasma, 2020, pp.10, 1023~
- P. He, "Understanding the formation mechanism of supersonic atmospheric plasma sprayed in-situ hypereutectic Al-25 wt%Si coating with nanostructured coupled eutectic: from powder, in-flight droplet, splat to coating", Appl. Surf. Sci, 530, pp.147246~ (2020)
- G.-Y. Kim, "Effect of chloride ions on electrochemical behavior of canister materials", Sci. Technol. Nucl. Install, pp.8577144~ (2022)