Beam-target configurations and robustness performance of the tungsten granular flow spallation target for an Accelerator-Driven Sub-critical system

키워드

참고문헌 (58)

1. C. D. Bowman, "Nuclear energy generation and waste transmutation using an accelerator-driven intense thermal neutron source", Nucl. Instrum. Methods Phys. Res, 320(12), pp.336~ (1992)[DOI]
2. Y. He, "Operation experience at CAFe, report on 2021 international conference on RF superconductivity (SRF2021)", Virtual Conference (2021)
3. "Phys. Procedia", 2014, 151~156
4. K. Jones, "Technological challenges in the path to 3.0 MW at the SNS accelerator", North American Particle Accelerator Conf.(NAPAC'16), pp.246~250 (2016)
5. T. Mora, "An evaluation of activation and radiation damage effects for the European Spallation Source Target", J. Nucl. Sci. Technol, 55(5), pp.548~558 (2018)
6. G. S. Bauer, "Overview on spallation target design concepts and related materials issues", J. Nucl. Mater, 398(1-3), pp.19~27 (2010)
7. G. S. Bauer, "MEGAPIE, a 1 MW pilot experiment for a liquid metal spallation target", J. Nucl. Mater, 296(1), pp.17~33 (2001)
8. G. S. Bauer, "SINQ layout, operation and R&D to high power", J. Phys. IV-Proc. EDP Sci, 12(8), pp.3~26 (2002)
9. C. Fazio, "The MEGAPIE-TEST project : supporting research and lessons learned in first-of-a-kind spallation target technology", Nucl. Eng. Des, 238(6), pp.1471~1495 (2008)
10. W. Wagner, "MEGAPIE at SINQeThe first liquid metal target driven by a megawatt class proton beam", J. Nucl. Mater, 377(1), pp.12~16 (2008)
11. T. McManamy, "Overview of the SNS target system testing and initial beam operation experience", J. Nucl. Mater, 377(1), pp.1~11 (2008)
12. S. Henderson, "Spallation Neutron Source progress, challenges and upgrade options", Proceedings of EPAC08 (2008)
13. B. Riemer, "Target operational experience at the spallation neutron source", Proceedings of the 11th International Topical Meeting on Nuclear Applications of Accelerators (AccApp 2013) (2013)
14. M. Futakawa, "Development of the Hg target in the JPARC neutron source", Nucl. Instrum. Methods Phys. Res. Sect. A Accel. Spectrom. Detect. Assoc. Equip, 600(1), pp.18~21 (2009)
15. T. Kai, "Experiences on Radioactivity Handling for Mercury Target System in MLF", J-PARC, 2014
16. S. Meigo, "Radiation damage and lifetime estimation of the proton beam window at the Japan Spallation Neutron Source", J. Nucl. Mater, 450(1), pp.141~146 (2014)
17. J. Mach, "Fatigue analysis of the spallation neutron source 2 MWtarget design", Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 165481~ (2021)
18. K. Haga, "Technical investigation on small water leakage incident occurrence in mercury target of J-PARC", J. Nucl. Sci. Technol, 55(2), pp.160~168 (2018)
19. T. Wakui, "New design of high power mercury target vessel of J-PARC", Mater. Sci. Forum, 1024, pp.145~150 (2021)
20. Lead-bismuth Target Design for the Subcritical Multiplier (SCM) of the Accelerator Driven Test Facility (ADTF), "Y. Gohar", Argonne National Lab, ~ (2002)
21. C. H. Cho, "Numerical design of a 20 MW leadebismuth spallation target for an accelerator-driven system", Nucl. Eng. Des, 229(2), pp.317~327 (2004)
22. Mol, Belgium P. Schuurmans, "Design and supporting R&D for the XTADS spallation target", Proc. Of the Fifth Workshop on Utilisation and Reliability of High Power Proton Accelerators (HPPA5) (2007)
23. H. A. Abderrahim, "MYRRHA, a multipurpose hybrid research reactor for high-end applications", Nucl. Phys. News, 20(1), pp.24~28 (2010)
24. "Int. J. Hydrogen Energy", 2015, 15137~15147
25. L. Yang, "New concept for ads spallation target : gravity-driven dense granular flow target", Sci. China Technol. Sci, 58, pp.1705~ (2015)[DOI]
26. "Nucl. Eng. Des", 2018, 289~296
27. J. Li, "Neutronic Study on a New Concept of Accelerator Driven Subcritical System in China", International Conference on Nuclear Engineering (2018), American Society of Mechanical Engineers
28. O. Caretta, "Preliminary experiments on a fluidised powder target", Proceedings of EPAC08 (2008)
29. C. Densham, "The potential of fluidised powder target technology in high power accelerator facilities", Proceedings of PAC09 (2009)
30. O. Caretta, "Response of a tungsten powder target to an incident high energy proton beam", Phys. Rev. Accel. Beams, 17, pp.101005~ (2014)[DOI]
31. T. W. Davies, "The production and anatomy of a tungsten powder jet", Powder Technol, 201(3), pp.296~300 (2016)
32. H. -J. Cai, "New target solution for a muon collider or a muon-decay neutrino beam facility : the granular waterfall target", Phys. Rev. Accel. Beams, 20(2), pp.023401~ (2017)
33. L. Hu, "Numerical study on cooling characteristics in granular and liquid spallation targets", Nucl. Eng. Des, 322, pp.474~484 (2017)
34. T. Davenne, "Observed proton beam induced disruption of a tungsten powder sample at CERN", Phys. Rev. Accel. Beams, 21, pp.073002~ (2018)
35. R. Chen, "Numerical analysis of the granular flow and heat transfer in the ADS granular spallation target", Nucl. Eng. Des, 330, pp.59~71 (2018)
36. O. Caretta, "Proton beam induced dynamics of tungsten granules", Phys. Rev. Accel. Beams, 21(3), pp.033401~ (2018)
37. J. Li, "Neutronics analysis of uranium compounds spallation target using Monte Carlo simulation", Nucl. Eng. Des, 324, pp.202~ (2017)[DOI]
38. F. Akhtar, "An investigation on the solid state sintering of mechanically alloyed nano-structured 90WeNieFe tungsten heavy alloy", Int. J. Refract. Met. Hard, 26, pp.145~151 (2008)[DOI]
39. S. H. Hong, "Combination of mechanical alloying and two-stage sintering of a 93W-5.6Ni-1.4Fe tungsten heavy alloy", Mater. Sci. Eng., A, 344(1), pp.253~260 (2003)[DOI]
40. L. Pang, "Study on collective friction and wear behavior of W-Ni-Fe alloy balls", Tribol. Int, 164, pp.107232~ (2021)
41. X. Zhang, "The optimization on neutronic performance of the granular spallation target by using low-density porous tungsten", Nucl. Instrum. Methods Phys. Res. Sect. A Accel. Spectrom. Detect. Assoc. Equip, 916, pp.22~31 (2019)
42. Y. Zhang, "Neutronics performance and activation calculation of dense tungsten granular target for China-ADS", Nucl. Instrum. Methods Phys. Res. B, 410, pp.88~ (2017)[DOI]
43. L. Gu, "Measurement of tungsten granular target worth on VENUS-II light water reactor and validation of the granular target model", Ann. Nucl. Energy, 150, pp.107825~ (2021)
44. W. Cui, "Temperature control for spallation target in accelerator driven system", Nucl. Instrum. Methods Phys. Res. Sect. B Beam Interact. Mater. Atoms, 448, pp.5~10 (2019)
45. K. Yin, "A non-intercepting monitoring method for beam position on the target in an accelerator driven system", Ann. Nucl. Energy, 153, pp.108075~ (2021)
46. I. B. a. Slessarev, "IAEA ADS-BENCHMARK (Stage 1) Results and Analysis", TCM-Meeting (1997)
47. K. Tsujimoto, "Neutronics design for lead-bismuth cooled accelerator-driven system for transmutation of minor actinide", J. Nucl. Sci. Technol, 41(1), pp.21~36 (2004)
48. Y. Tian, "Implementing discrete element method for large-scale simulation of particles on multiple GPUs", Comput. Chem. Eng, 104, pp.231~240 (2017)
49. P. Lin, "Simulation of Heat Transfer in Granular Systems with DEM on GPUs" (2017), Springer
50. Y. Tian, "A fast and accurate GPU based method on simulating energy deposition for beam-target coupling with granular materials", Comput. Phys. Commun, pp.108104~ (2021)
51. Han-Jie Cai, "Code Development and Target Station Design for Chinese Accelerator-Driven System Project", Nuclear Science and Engineering, 183(1), pp.107~115 (2016), Informa UK Limited[DOI]
52. H. J. Cai, "Toward high-efficiency and detailed Monte Carlo simulation study of the granular flow spallation target", Nucl. Instrum. Methods Phys. Res. Sect. A Accel. Spectrom. Detect. Assoc. Equip, 882, pp.117~123 (2018)
53. T. Sasa, "Code development for the design study of the OMEGA Program accelerator-driven transmutation systems", Nucl. Instrum. Methods Phys. Res, 463(3), pp.495~504 (2001)
54. MCNP-A General Monte Carlo N-Particle Transport Code, "J. F. Briesmeister", ~, pp.Report LA-13709-M (2000)
55. Y. K. Batygin, "Uniform target irradiation by circular beam sweeping", Nucl. Instrum. Methods Phys. Res. Sect. A Accel. Spectrom. Detect. Assoc. Equip, 363(1-2), pp.128~130 (1995)
56. M. Fukuda, "Simulation of spiral beam scanning for uniform irradiation on a large target", Nucl. Instrum. Methods Phys. Res. Sect. A Accel. Spectrom. Detect. Assoc. Equip, 396(1-2), pp.45~49 (1997)
57. H. Saugnac, "High energy beam line design of the 600 MeV 4mA proton linac for the Myrrha facility", Proc. 2nd IPAC Conf (2011)
58. Yuri K. Batygin, "Advancement of LANSCE accelerator facility as a 1-MW fusion prototypic neutron source", Nucl. Instrum. Methods Phys. Res. Sect. A Accel. Spectrom. Detect. Assoc. Equip, 960, pp.163569~ (2020)

관련 논문AI추천