Effect of post processing of digital image correlation on obtaining accurate true stress-strain data for AISI 304L
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The aim of this study is to provide a clear and accessible method to obtain accurate true-stress strain data, and to extend the limited material data beyond the ultimate tensile strength (UTS) for AISI 304L. AISI 304L is used for the outer construction for some types of nuclear transport packages, due to its postyield ductility and high failure strain. Material data for AISI 304L beyond UTS is limited throughout literature. 3D digital image correlation (DIC) was used during a series of uniaxial tensile experiments. Direct method extracted data such as true strain and instantaneous cross-sectional area throughout testing such that the true stress-strain response of the material up to failure could be created. Post processing of the DIC data has a considerable effect on the accuracy of the true stress-strain data produced. Influence of subset size and smoothing of data was investigated by using finite element analysis to inverse model the force displacement response in order to determine the true stress strain curve. The FE force displacement response was iteratively adapted, using subset size and smoothing of the DIC data. Results were validated by matching the force displacement response for the FE model and the experimental force displacement curve
Abstract
The aim of this study is to provide a clear and accessible method to obtain accurate true-stress strain data, and to extend the limited material data beyond the ultimate tensile strength (UTS) for AISI 304L. AISI 304L is used for the outer construction for some types of nuclear transport packages, due to its postyield ductility and high failure strain. Material data for AISI 304L beyond UTS is limited throughout literature. 3D digital image correlation (DIC) was used during a series of uniaxial tensile experiments. Direct method extracted data such as true strain and instantaneous cross-sectional area throughout testing such that the true stress-strain response of the material up to failure could be created. Post processing of the DIC data has a considerable effect on the accuracy of the true stress-strain data produced. Influence of subset size and smoothing of data was investigated by using finite element analysis to inverse model the force displacement response in order to determine the true stress strain curve. The FE force displacement response was iteratively adapted, using subset size and smoothing of the DIC data. Results were validated by matching the force displacement response for the FE model and the experimental force displacement curve
참고문헌 (39)
- "Packages" (2021)[URL]
- "Regulations for the Safe Transport of Radioactive Material, 2018 Edition" (2018)[URL]
- K. Zhao, "Identification of post-necking stress-strain curve for sheet metals by inverse method", Mech. Mater, 92, pp.107~118 (2016)
- ManSoo Joun, "A new method for acquiring true stress–strain curves over a large range of strains using a tensile test and finite element method", Mechanics of Materials, 40(7), pp.586~593 (2008), Elsevier BV[DOI]
- Matthieu Dunand, "Hybrid experimental–numerical analysis of basic ductile fracture experiments for sheet metals", International Journal of Solids and Structures, 47(9), pp.1130~1143 (2010), Elsevier BV[DOI]
- Lin Wang, "Identification of post-necking strain hardening behavior of thin sheet metals from image-based surface strain data in uniaxial tension tests", International Journal of Solids and Structures, 75-76, pp.12~31 (2015), Elsevier BV[DOI]
- Masayuki Kamaya, "A procedure for determining the true stress–strain curve over a large range of strains using digital image correlation and finite element analysis", Mechanics of Materials, 43(5), pp.243~253 (2011), Elsevier BV[DOI]
- H. W. S. Sutton, "Image Correlation for Shape, Motion and Deformation Measurements, No. 2009" (2009), Springer US
- P. Hariharan, "Optical Interferometry", pp.1~8 (2003), Elsevier
- W.H. Peters, "W. H. Peters, W. F. Ranson, Digital imaging techniques in experimental stress analysis, Opt. Eng. 21(3)(Jun. 1982)"[DOI]
- M. Sutton, "Application of an optimized digital correlation method to planar deformation analysis", Image Vis Comput, 4(3), pp.143~150 (1986)[DOI]
- M. A. Sutton, "Computer vision for shape and deformation measurements : recent developments and applications", SAE Tech. Pap, 115, pp.495~500 (2006)[DOI]
- "Effect of Loading History in Necking and Fracture Architected Materials Design and Fabrication Using Additive Manufacturing View Project ["[URL]
- D. Mohr, "A new experimental technique for the multi-axial testing of advanced high strength steel sheets", Exp. Mech, 48(1), pp.65~77 (2008)[DOI]
- M. Dunand, "Optimized butterfly specimen for the fracture testing of sheet materials under combined normal and shear loading", Eng. Fract. Mech, 78(17), pp.2919~2934 (2011)[DOI]
- H. Ghadbeigi, "Failure mechanisms in DP600 steel: initiation, evolution and fracture", Mater. Sci. Eng. A, 588, pp.420~431 (2013)
- Junrui Li, "A method of the direct measurement of the true stress–strain curve over a large strain range using multi-camera digital image correlation", Optics and Lasers in Engineering, 107, pp.194~201 (2018), Elsevier BV[DOI]
- Pierre Darry Versaillot, "Experimental study on the evolution of necking zones of metallic materials", International Journal of Mechanical Sciences, 189, pp.106002~ (2021), Elsevier BV[DOI]
- Feipeng Zhu, "Measurement of true stress–strain curves and evolution of plastic zone of low carbon steel under uniaxial tension using digital image correlation", Optics and Lasers in Engineering, 65, pp.81~88 (2015), Elsevier BV[DOI]
- H.C. Ho, "Modelling tensile tests on high strength S690 steel materials undergoing large deformations", Engineering Structures, 192, pp.305~322 (2019), Elsevier BV[DOI]
- S. Yaofeng, "Study of optimal subset size in digital image correlation of speckle pattern images", Opt Laser. Eng, 45(9), pp.967~974 (2007)[DOI]
- J. Baldoni, "Comparison of different filtering strategies to reduce noise in strain measurement with digital image correlation", J. Strain Anal. Eng. Des, 51(6), pp.416~430 (2016)[DOI]
- Satoru Yoneyama, "Basic principle of digital image correlation for in-plane displacement and strain measurement", Advanced Composite Materials, 25(2), pp.105~123 (2016), Informa UK Limited[DOI]
- W. Tong, "An evaluation of digital image correlation criteria for strain mapping applications", Strain, 41(4), pp.167~175 (2005)[DOI]
- B. Pan, "Equivalence of digital image correlation criteria for pattern matching", Appl. Opt, 49(28), pp.5501~5509 (2010)[DOI]
- Bing Pan, "Digital image correlation for surface deformation measurement: historical developments, recent advances and future goals", Measurement Science and Technology, 29(8), pp.082001~ (2018), IOP Publishing[DOI]
- P. Reu, "Stereo-rig design : creating the STEREO-RIG LAYOUT-PART 1", Exp. Tech, 36(5), pp.3~4 (2012)[DOI]
- P. Reu, "All about speckles : speckle density", Exp. Tech, 39(3), pp.1~2 (2015)[DOI]
- P. Reu, "Speckles and their relationship to the digital camera", Exp. Tech, 38(4), pp.1~2 (2014)[DOI]
- R. Hu"nady, "The aspects of strain fields’ measurement performed on small surfaces using digital image correlation method", EAN 2014 - 52nd Int. Conf. Exp. Stress Anal (2014)
- Ying Wang, "7.6 Computed Tomography of Composites", Comprehensive Composite Materials II, pp.101~118 (2018), Elsevier[DOI]
- L.S. Athanasiou, "Atherosclerotic Plaque Characterization Methods Based on Coronary Imaging", pp.151~166 (2017), Elsevier
- R.K. Blandford, "Tensile Stress-Strain Results for 304L and 316L Stainless Steel Plate", Temperature 2007 ASME Pressure Vessels and Piping Division Conference TENSILE STRESS-STRAIN RESULTS for 304L and 316L STAINLESS STEEL 1 PLATE at TEMPERATURE (2007)
- R. Bigger, "A Good Practices Guide for Digital Image Correlation", ~ (2018)
- P. Reu, "Hidden components of DIC: calibration and shape, Function-Part 1", ~ (2012)
- British Standards Institution, "BSI Standards Publication Testing Hardened Concrete, vol. 18", ~ (2019)
- Liang Xue, "Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading", International Journal of Solids and Structures, 44(16), pp.5163~5181 (2007), Elsevier BV[DOI]
- Yingbin Bao, "On fracture locus in the equivalent strain and stress triaxiality space", International Journal of Mechanical Sciences, 46(1), pp.81~98 (2004), Elsevier BV[DOI]
- Sandra Baltic, "Coupled damage variable based on fracture locus: Modelling and calibration", International Journal of Plasticity, 126, pp.102623~ (2020), Elsevier BV[DOI]