본문 바로가기
KERD
논문KCI 등재

Impact-resistant design of RC slabs in nuclear power plant buildings

Jia P.C.|Wu H.|Ma L.L.|Li Z.C.|Jia J.Y.
한국원자력학회 (Korean Nuclear Society)|2022.10|Nuclear Engineering and Technology|제54권 제10호|pp. 3745-3765|DOI 10.1016/j.net.2022.05.027

1

조회

0

다운로드

0

인용

0

참고문헌

키워드

Numerical simulationNuclear power plantImpact-resistant designContinuous surface cap modelTDOF model
주제분류원자력공학

초록

The concrete structures related to nuclear safety are threatened by accidental impact loadings, mainly including the low-velocity drop-weight impact (e.g., spent fuel cask and assembly, etc. with the velocity less than 20 m/s) and high-speed projectile impact (e.g., steel pipe, valve, turbine bucket, etc. with the velocity higher than 20 m/s), while the existing studies are still limited in the impact resistant design of nuclear power plant (NPP), especially the primary RC slab. This paper aims to propose the numerical simulation and theoretical approaches to assist the impact-resistant design of RC slab in NPP. Firstly, the continuous surface cap (CSC) model parameters for concrete with the compressive strength of 20 e70 MPa are fully calibrated and verified, and the refined numerical simulation approach is proposed. Secondly, the two-degree freedom (TDOF) model with considering the mutual effect of flexural and shear resistance of RC slab are developed. Furthermore, based on the low-velocity drop hammer tests and high-speed soft/hard projectile impact tests on RC slabs, the adopted numerical simulation and TDOF model approaches are fully validated by the flexural and punching shear damage, deflection, and impact force time-histories of RC slabs. Finally, as for the two low-velocity impact scenarios, the design procedure of RC slab based on TDOF model is validated and recommended. Meanwhile, as for the four actual high-speed impact scenarios, the impact-resistant design specification in Chinese code NB/T 20012-2019 is evaluated, the over conservation of which is found, and the proposed numerical approach is recommended. The present work could beneficially guide the impact-resistant design and safety assessment of NPPs against the accidental impact loadings.

Abstract

The concrete structures related to nuclear safety are threatened by accidental impact loadings, mainly including the low-velocity drop-weight impact (e.g., spent fuel cask and assembly, etc. with the velocity less than 20 m/s) and high-speed projectile impact (e.g., steel pipe, valve, turbine bucket, etc. with the velocity higher than 20 m/s), while the existing studies are still limited in the impact resistant design of nuclear power plant (NPP), especially the primary RC slab. This paper aims to propose the numerical simulation and theoretical approaches to assist the impact-resistant design of RC slab in NPP. Firstly, the continuous surface cap (CSC) model parameters for concrete with the compressive strength of 20 e70 MPa are fully calibrated and verified, and the refined numerical simulation approach is proposed. Secondly, the two-degree freedom (TDOF) model with considering the mutual effect of flexural and shear resistance of RC slab are developed. Furthermore, based on the low-velocity drop hammer tests and high-speed soft/hard projectile impact tests on RC slabs, the adopted numerical simulation and TDOF model approaches are fully validated by the flexural and punching shear damage, deflection, and impact force time-histories of RC slabs. Finally, as for the two low-velocity impact scenarios, the design procedure of RC slab based on TDOF model is validated and recommended. Meanwhile, as for the four actual high-speed impact scenarios, the impact-resistant design specification in Chinese code NB/T 20012-2019 is evaluated, the over conservation of which is found, and the proposed numerical approach is recommended. The present work could beneficially guide the impact-resistant design and safety assessment of NPPs against the accidental impact loadings.

참고문헌 (48)

  1. "Nuclear reactor accidents-history and legacies"[URL]
  2. IAEA, "Safety Reports Series No. 87, Safety Aspects of Nuclear Power Plants in Human Induced External Events", Assessment of structures, ~ (2018)
  3. "ACI Committee 349, ACI 349-13, Code Requirements for Nuclear Safety-Related Concrete Structures (ACI 349-13) and Commentary", ~ (2014)
  4. NB, "T 20012-2019, Design Code for Nuclear Safety Related Concrete Structures for Pressure Water Reactor Nuclear Power Plants", National Energy Administration, 2019
  5. R3 Impact Assessment Procedure, Release vol. 4. Magnox report, "Telford Arr", ~
  6. T. Zhang, "Numerical simulations of nuclear power plant containment subjected to aircraft impact", Nucl. Eng. Des, 320, pp.207~221 (2017)
  7. Y.G. Qu, "Safety assessment of Generation III nuclear power plant buildings subjected to commercial aircraft crash Part II: Structural damage and vibrations", Nuclear Engineering and Technology, 52(2), pp.397~416 (2020), 한국원자력학회
  8. Z.R. Li, "Damage and vibrations of nuclear power plant buildings subjected to aircraft crash part I: Model test", Nuclear Engineering and Technology, 53(9), pp.3068~3084 (2021), 한국원자력학회[DOI]
  9. Z.R. Li, "Damage and vibrations of nuclear power plant buildings subjected to aircraft crash part II: Numerical simulations", Nuclear Engineering and Technology, 53(9), pp.3085~3099 (2021), 한국원자력학회[DOI]
  10. I. Kojima, "An experimental study on local behavior of reinforced concrete slabs to missile impact", Nucl. Eng. Des, 130(2), pp.121~132 (1991)
  11. A. Vepsa, "IRIS 2010Part II: experimental data", Transaction of 21st International Conference on Structural Mechanics in Reactor Technology (2010)
  12. N. Orbovic, "IRIS 2010Part III: Numerical Simulations of Meppen II-4 Test and Vtt-Irsn-Cnsc Punching Tests", SMIRT21 (2010)
  13. A. Veps€a, "Soft impact testing of a wall-floor-wall reinforced concrete structure", Nucl. Eng. Des, 311, pp.86~103 (2017)
  14. T. Zhang, "Penetration depth of RC panels subjected to the impact of aircraft engine missiles", Nucl. Eng. Des, 335, pp.44~53 (2018)
  15. A. Haldar, "Local effect of solid missiles on concrete structures", J. Struct. Div. ASCE, 110(5), pp.948~960 (1984)
  16. F. Wang, "Experimental study of the resistance of RC walls with different transverse reinforcements subjected to large-scale rigid projectile impacts", Eng. Struct, 251, pp.113558~ (2022)
  17. Q. M. Li, "Local impact effects of hard missiles on concrete targets", Int. J. Impact Eng, 32(1-4), pp.224~284 (2005)
  18. Z.C. Li, "Safety assessment of nuclear fuel reprocessing plant under the free drop impact of spent fuel cask and fuel assembly part I: Large-scale model test and fi nite element model validation", Nuclear Engineering and Technology, 53(8), pp.2682~2695 (2021), 한국원자력학회[DOI]
  19. Y. H. Yang, "Numerical simulations of nuclear fuel reprocessing plant subjected to the free drop impact of spent fuel cask and fuel assembly", Nucl. Eng. Des, 385, pp.111524~ (2021)
  20. M. Zineddin, "Dynamic response and behavior of reinforced concrete slabs under impact loading", Int. J. Impact Eng, 34(9), pp.1517~1534 (2007)
  21. H. Othman, "An experimental investigation on the effect of steel reinforcement on impact response of reinforced concrete plates", Int. J. Impact Eng, 88, pp.12~21 (2016)
  22. Y. Xiao, "Experimental study of reinforced concrete slabs under different loading rates", ACI Struct. J, 113(1), pp.157~168 (2016)
  23. Y. Xiao, "Predicting response of reinforced concrete slabs under low-velocity impact", Mag. Concr. Res, 69(19), pp.996~1010 (2017)
  24. K. Fujikake, "Impact response of reinforced concrete beam and its analytical evaluation", J. Struct. Eng, 135(8), pp.938~950 (2009)
  25. W. Yi, "Simplified approach for assessing shear resistance of reinforced concrete beams under impact loads", ACI Struct. J, 113(4), pp.747~756 (2016)
  26. D. Zhao, "Numerical simulation and shear resistance of reinforced concrete beams under impact", Eng. Struct, 166, pp.387~401 (2018)
  27. LSTC, "LS-DYNA Keywords User's Manual Version R11 Volume II", pp.747~756 (2007), Livermore Software Technology Corporation
  28. D. Saini, "Concrete constitutive models for low velocity impact simulations", Int. J. Impact Eng, 132, pp.103329~ (2019)
  29. M. Zhao, "Modeling recommendations for RC and CFST sections in ls-dyna including bond slip", Eng. Struct, 229, pp.111612~ (2021)
  30. Y. D. Murray, "Users Manual for Ls-Dyna Concrete Material Model 159: No. FHWAHRT-05-062", Federal Highway Administration, ~ (2007)
  31. D. C. Stouffer, "Inelastic Deformation of Metals: Models, Mechanical Properties, and Metallurgy" (1996), John Wiley and Sons
  32. J. C. Lim, "Stress-strain model for normal-and light-weight concretes under uniaxial and triaxial compression", Construct. Build. Mater, 71, pp.492~509 (2014)
  33. H. Jiang, "Calibration of the continuous surface cap model for concrete", Finite Elem. Anal. Des, 97, pp.1~19 (2015)
  34. Y. D. Murray, "Evaluation of Ls-Dyna Concrete Material Model 159: No. FHWA-HRT-05-063", Federal Highway Administration, ~ (2007)
  35. "CEB-FIP Model Code 1990, Comite Euro-International du Beton", Thomas Telford House, ~ (1993)
  36. "GB 50010-2010, Code for Design of Concrete Structures", Standards Press of China, ~ (2010)
  37. P. C. Jia, "Dynamic responses of reinforced ultra-high performance concrete members under low-velocity lateral impact", Int. J. Impact Eng, 150, pp.103818~ (2021)
  38. "Gb T 1499.2 2018, Steel for the Reinforcement of Concrete-Part 2: Hot Rolled Ribbed Bars", Standards Press of China, ~ (2018)
  39. "Gb T 1499.1 2017, Steel for the Reinforcement of Concrete-Part 1: Hot Rolled Plain Bars", Standards Press of China, ~ (2017)
  40. M. M. Attard, "Stress-strain relationship of confined and unconfined concrete", ACI Mater. J, 93(5), pp.432~442 (1996)
  41. S. Hu, "Experimental study on fracture property of three-point bending concrete beam based on DIC method", Yangtze River, 50(10), pp.197~202 (2019)[DOI]
  42. A. Muttoni, "Punching shear strength of reinforced concrete slabs without transverse reinforcement", ACI Struct. J, 105(2), pp.440~450 (2008)
  43. M. F. Ruiz, "Applications of critical shear crack theory to punching of reinforced concrete slabs with transverse reinforcement", ACI Struct. J, 106(4), pp.485~494 (2009)
  44. H. Li, "Analytical and numerical studies on impact force profile of RC beam under drop weight impact", Int. J. Impact Eng, 147, pp.103743~ (2021)
  45. S. A. Anagnostopoulos, "Pounding of buildings in series during earthquakes", Earthq. Eng. Struct. Dynam, 16(3), pp.443~456 (1988)
  46. S. Yoo, "Effect of strengthening methods on two-way slab under low-velocity impact loading", Materials, 13(24), pp.5603~ (2020)
  47. N. Jones, "Structural Impact" (1997), Cambridge University Press
  48. A. Veps€a, "Impact tests for IRIS_2010 benchmark exercise", J. Disaster Res, 7(5), pp.619~628 (2012)

관련 논문AI추천

Feasibility of UHPC shields in spent fuel vertical concrete cask to resist accidental drop impactJia P.C., Ma L.L., Peng Q., Wu H.한국원자력학회 · Nuclear Engineering and Technology2022 · 제54권 제11호Experimental and numerical study on seismic behavior of SSC slab-RC wall joints in NPPDu Xiaodong, Wang Dayang, Wang Xing, Xu Haitao, Ye Junpeng, Zhang Yongshan, Zhao Ming한국원자력학회 · Nuclear Engineering and Technology2025 · 제57권 제12호RC슬래브와 연성충격체의 충돌시뮬레이션 영향인자 분석김상윤, 이재하, 이정휘, 정철헌한국전산구조공학회 · 한국전산구조공학회논문집2011 · 제24권 제6호Experimental and numerical study on mechanical behavior of RC shear walls with precast steel-concrete composite module in nuclear power plantBai Mingxin, Ding Zhixin, Dong Zhanfa, Du Xiaodong, Wang Dayang, Xu Haitao, Xu Jinbin한국원자력학회 · Nuclear Engineering and Technology2024 · 제56권 제6호Experimental and numerical study on seismic behaviors of SRC column-RC slab joints in NPPLiu Qiang, Song Yuanqi, Wang Dayang, Zhang Yongshan, Zhu Yong한국원자력학회 · Nuclear Engineering and Technology2025 · 제57권 제2호Seismic fragility analysis of reinforced concrete shear walls with high-strength reinforcing bar for nuclear power plants박홍근, 백장운, 손호영, 이상우, 주부석한국원자력학회 · Nuclear Engineering and Technology2025 · 제57권 제12호

이 간행물의 다른 논문 (33건)

Development of a distributed high-speed data acquisition and monitoring system based on a special data packet format for HUST RF negative ion sourceZuo Chen, Chen Dezhi, Li Dong, Yin Ling, Wang Saipp. 3587-3594Optimization of preventive maintenance of nuclear safety-class DCS based on reliability modelingXu Biao, Zhang Xu, Peng Hao, Wang Yuanbing, Hu Qingrenpp. 3595-3603The development of EASI-based multi-path analysis code for nuclear security system with variability extensionSetiadipura Topan, Su'ud Zaki, Purqon Acep, Andiwijayakusuma Dinanpp. 3604-3613Measurement of the ICRH antenna phasing using antenna strap probe based diagnostic system in EAST tokamakLiang Q.C., Zhang X.J., Yang H., Yuan S., Mao Y.Z., Zhang W., Zhu G.H., Wang L., Qin C.M., Zhao Y.P., Cheng Y., Zhang K., Liu L.N.pp. 3614-3619Consistency check algorithm for validation and re-diagnosis to improve the accuracy of abnormality diagnosis in nuclear power plants이승준, 김근희, 김재민, 신지현pp. 3620-3630
원문 보기