Effectiveness of Ni-based and Fe-based cladding alloys in delaying hydrogen generation for small modular reactors with increased accident tolerance

키워드

참고문헌 (71)

1. Studies of metal-water reactions at high temperatures experimental-and theoretical studies of the zirconium-water reaction, in: AEC Research and Development Report, "L.J. Baker", Argonne National Laboratory, ~, pp.Report No.: ANL-6548 (1962)
2. Zirconium Metal-Water Oxidation Kinetics, IV: Reaction Rate Studies, "J. V. Cathcart", Oak Ridge National Laboratory, ~, pp.Report No.: ORNL (1977), NUREG-17
3. V.F. Urbanic, "High-temperature oxidation of zircaloy-2 and zircaloy-4 in steam", Journal of Nuclear Materials, 75(2), pp.251~261 (1978), Elsevier BV[DOI]
4. Alan Matias Avelar, "Oxidation of AISI 304L and 348 Stainless Steels in Water at High Temperatures", Materials Research, 23(6), pp.e20200373~ (2020), FapUNIFESP (SciELO)[DOI]
5. Developments in the Analysis and Management of Combustible Gases in Severe Accidents in Water Cooled Reactors Following the Fukushima Daiichi Accident, "International Atomic Energy Agency", IAEA, ~, pp.Report No.: IAEA-TECDOC-1939 (2020)
6. Analysis of Options and Experimental Examination of Fuels for Water Cooled Reactors with Increased Accident Tolerance (ACTOF): Final Report of a Coordinated Research Project, "International Atomic Energy Agency", IAEA, ~, pp.Report No.: IAEA-TECDOC-1921 (2020)
7. Kurt A. Terrani, "Accident tolerant fuel cladding development: Promise, status, and challenges", Journal of Nuclear Materials, 501, pp.13~30 (2018), Elsevier BV[DOI]
8. B. A. Pint, "Material Selection for Accident Tolerant Fuel Cladding", Metallurgical and Materials Transactions E, 2(3), pp.190~196 (2015), Springer Science and Business Media LLC[DOI]
9. Raul B. Rebak, "Versatile Oxide Films Protect FeCrAl Alloys Under Normal Operation and Accident Conditions in Light Water Power Reactors", JOM, 70(2), pp.176~185 (2017), Springer Science and Business Media LLC[DOI]
10. Chongchong Tang, "High-temperature oxidation and hydrothermal corrosion of textured Cr2AlC-based coatings on zirconium alloy fuel cladding", Surface and Coatings Technology, 419, pp.127263~ (2021), Elsevier BV[DOI]
11. C.R.F. Azevedo, "Selection of fuel cladding material for nuclear fission reactors", Engineering Failure Analysis, 18(8), pp.1943~1962 (2011), Elsevier BV[DOI]
12. K.A. Terrani, "Advanced oxidation-resistant iron-based alloys for LWR fuel cladding", Journal of Nuclear Materials, 448(1-3), pp.420~435 (2014), Elsevier BV[DOI]
13. Caleb P. Massey, "Cladding burst behavior of Fe-based alloys under LOCA", Journal of Nuclear Materials, 470, pp.128~138 (2016), Elsevier BV[DOI]
14. Evaluation of Stainless Steel Cladding for Use in Current Design LWRs Final Report, "A. Strasser", ~, pp.Report No.: EPRI-NP-2642 (1982)
15. Kinga A. Unocic, "Effect of Al and Cr Content on Air and Steam Oxidation of FeCrAl Alloys and Commercial APMT Alloy", Oxidation of Metals, 87(3-4), pp.431~441 (2017), Springer Science and Business Media LLC[DOI]
16. Trishelle M. Copeland-Johnson, "Characterization of Kanthal APMT and T91 oxidation at beyond design-basis accident temperatures", Corrosion Science, 171, pp.108598~ (2020), Elsevier BV[DOI]
17. Yingjie Qiao, "Mechanism of Al on FeCrAl steam oxidation behavior and molecular dynamics simulations", Journal of Alloys and Compounds, 828, pp.154310~ (2020), Elsevier BV[DOI]
18. P.D. Edmondson, "Irradiation-enhanced α′ precipitation in model FeCrAl alloys", Scripta Materialia, 116, pp.112~116 (2016), Elsevier BV[DOI]
19. Carlo Parisi, "Risk-Informed Safety Analysis for Accident Tolerant Fuels", Nuclear Science and Engineering, 194(8-9), pp.748~770 (2020), Informa UK Limited[DOI]
20. Modelling of Fuel Behaviour in Design Basis Accidents and Design Extension Conditions, "International Atomic Energy Agency", IAEA, ~, pp.Report No.: IAEA-TECDOC-1913 (2020)
21. Results of the bundle test QUENCH-19with FeCrAl claddings, "Stuckert J.", Karlsruher Institut für Technologie (KIT), ~, pp.Report No.:NUSAFE 3574
22. Chaewon Kim, "Oxidation mechanism and kinetics of nuclear-grade FeCrAl alloys in the temperature range of 500–1500 °C in steam", Journal of Nuclear Materials, 564, pp.153696~ (2022), Elsevier BV[DOI]
23. S.V. Bechta, "Phase diagram of the UO2–FeO1+x system", Journal of Nuclear Materials, 362(1), pp.46~52 (2007), Elsevier BV[DOI]
24. J. T. BITTEL, "Oxidation of 304L Stainless Steel by Steam and by Air", Corrosion, 25(1), pp.7~14 (1969), Association for Materials Protection and Performance (AMPP)[DOI]
25. J. Wang, "Effectiveness of Cr-Coated Zr-Alloy Clad in Delaying Fuel Degradation for a PWR During a Station Blackout Event", Nuclear Technology, 206(3), pp.467~477 (2019), Informa UK Limited[DOI]
26. Anil Gurgen, "Estimation of coping time in pressurized water reactors for near term accident tolerant fuel claddings", Nuclear Engineering and Design, 337, pp.38~50 (2018), Elsevier BV[DOI]
27. Alan Matias Avelar, "On the nuclear safety improvement by post-inerting small modular reactor with stainless steel cladding", Annals of Nuclear Energy, 149, pp.107775~ (2020), Elsevier BV[DOI]
28. Zhao Yang, "Steam oxidation resistance of plasma sprayed chromium‐containing coatings at 1200 °C", Materials and Corrosion, 70(1), pp.37~47 (2018), Wiley[DOI]
29. Egor Kashkarov, "Recent Advances in Protective Coatings for Accident Tolerant Zr-Based Fuel Claddings", Coatings, 11(5), pp.557~ (2021), MDPI AG[DOI]
30. Dmitrii V. Sidelev, "Nickel-chromium (Ni–Cr) coatings deposited by magnetron sputtering for accident tolerant nuclear fuel claddings", Surface and Coatings Technology, 369, pp.69~78 (2019), Elsevier BV[DOI]
31. L. A. Karpyuk, "Steel Cladding for VVER Fuel Pins in the Context of Accident-Tolerant Fuel: Prospects", Atomic Energy, 128(4), pp.218~222 (2020), Springer Science and Business Media LLC[DOI]
32. V. N. Rechitskii, "Effect of nitrogen on the properties of Bochvalloy (42KhNM) alloy in the operating and high temperature range", Metal Science and Heat Treatment, 51(5-6), pp.278~285 (2009), Springer Science and Business Media LLC[DOI]
33. Mechanical and Physical Properties of Irradiated Type 348Stainless Steel, "J.M. Beeston", United States, ~, pp.Report No.: CONF-800609–1 (1980)
34. Susan Han, "Oxidation - Nitridation of Ni-Cr-Al alloys", Materials Research, 7(1), pp.11~16 (2004), FapUNIFESP (SciELO)[DOI]
35. D. L. Douglass, "The effect of silicon and manganese on the oxidation mechanism of Ni-20 Cr", Oxidation of Metals, 2(2), pp.207~231 (1970), Springer Science and Business Media LLC[DOI]
36. T. Dudziak, "Steam Oxidation Behavior of Advanced Steels and Ni-Based Alloys at 800 °C", Journal of Materials Engineering and Performance, 26(3), pp.1044~1056 (2017), Springer Science and Business Media LLC[DOI]
37. Ashwini Kumar Yadav, "Experimental and numerical investigation on thermo-mechanical behavior of fuel rod under simulated LOCA conditions", Nuclear Engineering and Design, 337, pp.51~65 (2018), Elsevier BV[DOI]
38. Decay Heat Power in Light Water Reactors, "American Nuclear Society", ANS, ~, pp.Report No.: ANSI (2014), ANS-5.1-2014
39. Material Property Correlations: Comparisons between FRAPCON-3.5, FRAPTRAN-1.5, and MATPRO, "W. G. Luscher", Pacific Northwest National Laboratory, ~, pp.Report No.: NUREG (2014), CR-7024, Rev. 1
40. Thermophysical Properties of Materials for Water Cooled Reactors, "International Atomic Energy Agency", IAEA, ~, pp.Report No.: IAEATECDOC-949 (1997)
41. Thermophysical Properties Database of Materials for Light Water Reactors and Heavy Water Reactors -Final Report of a Coordinated Research Project, "International Atomic Energy Agency", IAEA, ~, pp.Report No.: IAEA-TECDOC-1496 (2006)
42. Handbook on the Material Properties of FeCrAl Alloys for Nuclear Power Production Applications, "K. G. Field", ORNL, ~, pp.Report No.: ORNL (2017), TM-2017[DOI]
43. SCDAP, "RELAP5", MOD 3.1 Code Manual:MATPRO, in: A Library of Materials Properties for Light-Water-Reactor Accident Analysis, vol. 4, USNRC, pp.1995, ~[DOI]
44. G. V. Kulakov, "Prospects for using Chromium-Nickel Alloy 42KhNM in Different Types of Reactors", Atomic Energy, 130(1), pp.25~28 (2021), Springer Science and Business Media LLC[DOI]
45. Kaizo Monma, "High-Temperature Creep of Nickel-Chromium Alloys (On the Relation Between High-Temperature Creep and Diffusion in Nickel Base Solid Solutions, IV)", Journal of the Japan Institute of Metals, 28(5), pp.253~258 (1964), Japan Institute of Metals[DOI]
46. Zhong Yang, "Investigating creep behavior of Ni–Cr–W alloy pressurized tube at 950 °C by using in-situ creep testing system", Nuclear Engineering and Technology, 52(7), pp.1481~1485 (2020), 한국원자력학회[DOI]
47. Marie Kvapilova, "High Temperature Creep Behaviour of Cast Nickel-Based Superalloys INC 713 LC, B1914 and MAR-M247", Metals, 11(1), pp.152~ (2021), MDPI AG[DOI]
48. H. Nickel, "Evaluation of alloys for advanced high-temperature reactor systems", Nuclear Engineering and Design, 78(2), pp.251~265 (1984), Elsevier BV[DOI]
49. "NuScale standard plant design certification application, Chapter Four: Reactor" (2020)[URL]
50. B.A. Gurovich, "Investigation of the possibility of using 42KhNM alloy as a cladding for a tolerant fuel rod", Proceedings of the 15th International Scientific-Practical Conference on Atomic Energy (2019)
51. Hwasung Yeom, "High temperature oxidation and microstructural evolution of cold spray chromium coatings on Zircaloy-4 in steam environments", Journal of Nuclear Materials, 526, pp.151737~ (2019), Elsevier BV[DOI]
52. Jean-Christophe Brachet, "High temperature steam oxidation of chromium-coated zirconium-based alloys: Kinetics and process", Corrosion Science, 167, pp.108537~ (2020), Elsevier BV[DOI]
53. Hai-Bin Ma, "Oxidation behavior of Cr-coated zirconium alloy cladding in high-temperature steam above 1200 °C", npj Materials Degradation, 5(1) (2021), Springer Science and Business Media LLC[DOI]
54. Jianming Zhan, "High temperature oxidation behavior of type 444 stainless steel in synthetic automotive exhaust gas", Journal of Materials Research and Technology, 12, pp.530~541 (2021), Elsevier BV[DOI]
55. M. Le Calvar, "Etude, par spectroscopies optiques de reflexion dans l'ultraviolet, visible, proche infrarouge et infrarouge, par spectroscopie XPS de l'oxydation d'un alliage Ni-20Cr", Journal of Nuclear Materials, 173(1), pp.71~77 (1990), Elsevier BV[DOI]
56. Amanda Leong, "Oxidation behavior of Fe-Cr-2Si alloys in high temperature steam", Corrosion Science, 179, pp.109114~ (2021), Elsevier BV[DOI]
57. H. Okamoto, "O-Zr (Oxygen-Zirconium)", Journal of Phase Equilibria and Diffusion, 28(5), pp.498~498 (2007), Springer Science and Business Media LLC[DOI]
58. Taufiq Hidayat, "Thermodynamic reevaluation of the Fe–O system", Calphad, 48, pp.131~144 (2015), Elsevier BV[DOI]
59. O. Kubaschewski, "Metallurgical Thermochemistry" (1967), Pergamon Press Ltd
60. Brad J. Merrill, "Modification of MELCOR for severe accident analysis of candidate accident tolerant cladding materials", Nuclear Engineering and Design, 315, pp.170~178 (2017), Elsevier BV[DOI]
61. B.A. Pint, "High temperature oxidation of fuel cladding candidate materials in steam–hydrogen environments", Journal of Nuclear Materials, 440(1-3), pp.420~427 (2013), Elsevier BV[DOI]
62. Qian Xiao, "On the feasibility of duplex stainless steel 2205 as an accident tolerant fuel cladding material for light water reactors", Journal of Nuclear Materials, 557, pp.153265~ (2021), Elsevier BV[DOI]
63. Xu Wu, "Neutronics and fuel performance evaluation of accident tolerant FeCrAl cladding under normal operation conditions", Annals of Nuclear Energy, 85, pp.763~775 (2015), Elsevier BV[DOI]
64. Jaakko Leppänen, "The Serpent Monte Carlo code: Status, development and applications in 2013", Annals of Nuclear Energy, 82, pp.142~150 (2015), Elsevier BV[DOI]
65. A. M. Savchenko, "Peculiarities of stainless steels application as ATF in VVER’S", TopFuel-2018 Conf. Prague (2018)
66. Nourdine Chikhi, "Determination of the hydrogen source term during the reflooding of an overheated core: Calculation results of the integral reflood test QUENCH-03 with PWR-type bundle", Nuclear Engineering and Design, 250, pp.351~363 (2012), Elsevier BV[DOI]
67. Gurovich B.A., "Improved evaluation of ring tensile test ductility applied to neutron irradiated 42XNM tubes in the temperature range of (500–1100)°C", Nuclear Engineering and Technology, 52(6), pp.1213~1221 (2020), 한국원자력학회[DOI]
68. P. Xu, "Oxidation behavior of grain boundary engineered alloy 690 in supercritical water environment", Journal of Nuclear Materials, 422(1-3), pp.143~151 (2012), Elsevier BV[DOI]
69. A.F. Rowcliffe, "Perspectives on radiation effects in nickel-base alloys for applications in advanced reactors", Journal of Nuclear Materials, 392(2), pp.341~352 (2009), Elsevier BV[DOI]
70. G. V. Kulakov, "High-Temperature Behavior of Irradiated Dispersion Fuel Rods with 42KhNM-Alloy Cladding", Atomic Energy, 130(4), pp.220~223 (2021), Springer Science and Business Media LLC[DOI]
71. Ali Alraisi, "Effects of ATF cladding properties on PWR responses to an SBO accident: A sensitivity analysis", Annals of Nuclear Energy, 165, pp.108784~ (2022), Elsevier BV[DOI]

관련 논문AI추천